[PATCH v2 4/9] ARM: zynq: PM: Enable DDR clock stop

[Daniel Lezcano]

On 09/02/2014 11:19 PM, Soren Brinkmann wrote:
> The DDR controller can detect idle periods and leverage low power
> features clock stop. When new requests occur, the DDRC resumes
> normal operation.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann at xilinx.com>

Acked-by: Daniel Lezcano <daniel.lezcano at linaro.org>

> ---
> v2:
>   - properly document return value for zynq_pm_ioremap
>   - change zynq_pm_late_init signature to return void
>   - add kernel doc to late_init()
>   - fix kernel doc
>   - only enable clock-stop during boot and leave out self-refresh. The
>     self-refresh penalty is apparently not-negligible
> ---
>   arch/arm/mach-zynq/Makefile |  2 +-
>   arch/arm/mach-zynq/common.c |  1 +
>   arch/arm/mach-zynq/common.h |  2 ++
>   arch/arm/mach-zynq/pm.c     | 83 +++++++++++++++++++++++++++++++++++++++++++++
>   4 files changed, 87 insertions(+), 1 deletion(-)
>   create mode 100644 arch/arm/mach-zynq/pm.c
>
> diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile
> index 1b25d92ebf22..820dff6e1eba 100644
> --- a/arch/arm/mach-zynq/Makefile
> +++ b/arch/arm/mach-zynq/Makefile
> @@ -3,7 +3,7 @@
>   #
>
>   # Common support
> -obj-y				:= common.o slcr.o
> +obj-y				:= common.o slcr.o pm.o
>   CFLAGS_REMOVE_hotplug.o		=-march=armv6k
>   CFLAGS_hotplug.o 		=-Wa,-march=armv7-a -mcpu=cortex-a9
>   obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
> diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
> index 3cb7c198615a..6bd13e5ce6b7 100644
> --- a/arch/arm/mach-zynq/common.c
> +++ b/arch/arm/mach-zynq/common.c
> @@ -101,6 +101,7 @@ static int __init zynq_get_revision(void)
>   static void __init zynq_init_late(void)
>   {
>   	zynq_core_pm_init();
> +	zynq_pm_late_init();
>   }
>
>   /**
> diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
> index 596ef0b5067c..0edbb6997b1c 100644
> --- a/arch/arm/mach-zynq/common.h
> +++ b/arch/arm/mach-zynq/common.h
> @@ -40,6 +40,8 @@ extern void __iomem *zynq_scu_base;
>   /* Hotplug */
>   extern void zynq_platform_cpu_die(unsigned int cpu);
>
> +void zynq_pm_late_init(void);
> +
>   static inline void zynq_core_pm_init(void)
>   {
>   	/* A9 clock gating */
> diff --git a/arch/arm/mach-zynq/pm.c b/arch/arm/mach-zynq/pm.c
> new file mode 100644
> index 000000000000..911fcf865be8
> --- /dev/null
> +++ b/arch/arm/mach-zynq/pm.c
> @@ -0,0 +1,83 @@
> +/*
> + * Zynq power management
> + *
> + *  Copyright (C) 2012 - 2014 Xilinx
> + *
> + *  Sören Brinkmann <soren.brinkmann at xilinx.com>
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include "common.h"
> +
> +/* register offsets */
> +#define DDRC_CTRL_REG1_OFFS		0x60
> +#define DDRC_DRAM_PARAM_REG3_OFFS	0x20
> +
> +/* bitfields */
> +#define DDRC_CLOCKSTOP_MASK	BIT(23)
> +#define DDRC_SELFREFRESH_MASK	BIT(12)
> +
> +static void __iomem *ddrc_base;
> +
> +/**
> + * zynq_pm_ioremap() - Create IO mappings
> + * @comp:	DT compatible string
> + * Return: Pointer to the mapped memory or NULL.
> + *
> + * Remap the memory region for a compatible DT node.
> + */
> +static void __iomem *zynq_pm_ioremap(const char *comp)
> +{
> +	struct device_node *np;
> +	void __iomem *base = NULL;
> +
> +	np = of_find_compatible_node(NULL, NULL, comp);
> +	if (np) {
> +		base = of_iomap(np, 0);
> +		of_node_put(np);
> +	} else {
> +		pr_warn("%s: no compatible node found for '%s'\n", __func__,
> +				comp);
> +	}
> +
> +	return base;
> +}
> +
> +/**
> + * zynq_pm_late_init() - Power management init
> + *
> + * Initialization of power management related featurs and infrastructure.
> + */
> +void __init zynq_pm_late_init(void)
> +{
> +	u32 reg;
> +
> +	ddrc_base = zynq_pm_ioremap("xlnx,zynq-ddrc-a05");
> +	if (!ddrc_base) {
> +		pr_warn("%s: Unable to map DDRC IO memory.\n", __func__);
> +	} else {
> +		/*
> +		 * Enable DDRC clock stop feature. The HW takes care of
> +		 * entering/exiting the correct mode depending
> +		 * on activity state.
> +		 */
> +		reg = readl(ddrc_base + DDRC_DRAM_PARAM_REG3_OFFS);
> +		reg |= DDRC_CLOCKSTOP_MASK;
> +		writel(reg, ddrc_base + DDRC_DRAM_PARAM_REG3_OFFS);
> +	}
> +}
>


-- 
  <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog