[PATCH 2/2] ARM: dts: imx6x-sdb: Add LCD support

[Shawn Guo]

On Mon, Sep 01, 2014 at 02:50:03PM -0300, Fabio Estevam wrote:
> Add support for the "MX28LCD Seiko 4.3' WVGA" panel.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
>  arch/arm/boot/dts/imx6sx-sdb.dts | 93 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 93 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
> index a3980d9..e2c244d 100644
> --- a/arch/arm/boot/dts/imx6sx-sdb.dts
> +++ b/arch/arm/boot/dts/imx6sx-sdb.dts
> @@ -24,6 +24,13 @@
>  		reg = <0x80000000 0x40000000>;
>  	};
>  
> +	backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm3 0 5000000>;
> +		brightness-levels = <0 4 8 16 32 64 128 255>;
> +		default-brightness-level = <6>;
> +	};
> +
>  	gpio-keys {
>  		compatible = "gpio-keys";
>  		pinctrl-names = "default";
> @@ -90,6 +97,14 @@
>  			regulator-min-microvolt = <5000000>;
>  			regulator-max-microvolt = <5000000>;
>  		};
> +
> +		reg_lcd_3v3: regulator at 4 {
> +			compatible = "regulator-fixed";
> +			reg = <4>;
> +			regulator-name = "lcd-3v3";
> +			gpio = <&gpio3 27 0>;
> +			enable-active-high;
> +		};
>  	};
>  
>  	sound {
> @@ -251,6 +266,44 @@
>  	};
>  };
>  
> +&lcdif1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_lcd>;
> +	lcd-supply = <&reg_lcd_3v3>;
> +	display = <&display0>;
> +	status = "okay";
> +
> +	display0: display {

Shouldn't the node be named more specific, so that we do not run into
the kernel warning complaining duplicated property name?

Shawn

> +		bits-per-pixel = <16>;
> +		bus-width = <24>;
> +
> +		display-timings {
> +			native-mode = <&timing0>;
> +			timing0: timing0 {
> +				clock-frequency = <33500000>;
> +				hactive = <800>;
> +				vactive = <480>;
> +				hback-porch = <89>;
> +				hfront-porch = <164>;
> +				vback-porch = <23>;
> +				vfront-porch = <10>;
> +				hsync-len = <10>;
> +				vsync-len = <10>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +		};
> +	};
> +};
> +
> +&pwm3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm3>;
> +	status = "okay";
> +};
> +
>  &ssi2 {
>  	status = "okay";
>  };
> @@ -365,6 +418,46 @@
>  			>;
>  		};
>  
> +		pinctrl_lcd: lcdgrp {
> +			fsl,pins = <
> +				MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
> +				MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
> +				MX6SX_PAD_LCD1_CLK__LCDIF1_CLK	0x4001b0b0
> +				MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
> +				MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
> +				MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
> +				MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
> +			>;
> +		};
> +
> +		pinctrl_pwm3: pwm3grp-1 {
> +			fsl,pins = <
> +				MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
> +			>;
> +		};
> +
>  		pinctrl_vcc_sd3: vccsd3grp {
>  			fsl,pins = <
>  				MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
> -- 
> 1.9.1
>