[PATCH 0/3] arm64: Add support for Juno development board

[Liviu Dudau]

This patchset adds device tree support for ARM's AArch64 Juno development
board. It enables use of various peripherals on the board, from USB and
networking to I2C and PL011 UART.

The device tree file might end up not being merged in the kernel if Mark
Rutland's plans to create a separate repositories for .dts files pan out,
but I would like the first two patches to be added to arch/arm64.

Best regards,
Liviu


Liviu Dudau (3):
  arm64: defconfig: Enable support for generic EHCI and OHCI platforms
  arm64: Create link to include/dt-bindings to enable C preprocessor use.
  arm64: Add Juno SoC device tree.

 arch/arm64/boot/dts/Makefile            |   2 +-
 arch/arm64/boot/dts/include/dt-bindings |   1 +
 arch/arm64/boot/dts/juno.dts            | 374 ++++++++++++++++++++++++++++++++
 arch/arm64/configs/defconfig            |   5 +
 4 files changed, 381 insertions(+), 1 deletion(-)
 create mode 120000 arch/arm64/boot/dts/include/dt-bindings
 create mode 100644 arch/arm64/boot/dts/juno.dts

-- 
2.1.2