[PATCH v2] mmc: dw_mmc: add support for the other bit of sdio interrupt

Doug Anderson dianders at chromium.org
Fri Oct 31 08:55:12 PDT 2014


Jaehoon,

On Fri, Oct 31, 2014 at 1:45 AM, Jaehoon Chung <jh80.chung at samsung.com> wrote:
> Hi, Addy.
>
> On 10/31/2014 12:50 PM, Addy Ke wrote:
>> The bit of sdio interrupt is 16 in designware implementation,
>> but it is 24 in RK3288. This patch add sdio_id0 for the number
>> of slot0 in the SDIO interrupt registers, which can be set in
>> platform DT table, such as:
>> - rockchip,sdio-interrupt-slot0 = <8>;
>
> I have a question. (It's not important question)
> You mentioned the sdio-irq bit used from 24 to 31, right?
> Then what interrupts are used from 16 to 23 at RK3288? Just reserved?

In my TRM 16 shows as "data_nobusy".  A quick search doesn't show any
documentation for what this means.  17-23 and 25-31 are reserved.

Note that (of course) there's no actual support for more than one slot
on rk3288, so claiming that "24-31" is SDIO INT is a little silly, but
I agree that it's probably is the best way to fit into the existing
code until someone gets around to removing the whole multi-slot cruft.



More information about the linux-arm-kernel mailing list