[PATCH V2 03/13] clk: mmp: add init callback for clk-frac

[Chao Xie]

From: Chao Xie <chao.xie at marvell.com>

For the clk-frac, we need to make sure that the initial
clock rate is one item of the table.
If it is not, we use the first item in the table by default.

Signed-off-by: Chao Xie <chao.xie at marvell.com>
---
 drivers/clk/mmp/clk-frac.c | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/drivers/clk/mmp/clk-frac.c b/drivers/clk/mmp/clk-frac.c
index e29d006..1876d2c 100644
--- a/drivers/clk/mmp/clk-frac.c
+++ b/drivers/clk/mmp/clk-frac.c
@@ -118,10 +118,50 @@ static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate,
 	return 0;
 }
 
+void clk_factor_init(struct clk_hw *hw)
+{
+	struct mmp_clk_factor *factor = to_clk_factor(hw);
+	struct mmp_clk_factor_masks *masks = factor->masks;
+	u32 val, num, den;
+	int i;
+	unsigned long flags = 0;
+
+	if (factor->lock)
+		spin_lock_irqsave(factor->lock, flags);
+
+	val = readl(factor->base);
+
+	/* calculate numerator */
+	num = (val >> masks->num_shift) & masks->num_mask;
+
+	/* calculate denominator */
+	den = (val >> masks->den_shift) & masks->den_mask;
+
+	for (i = 0; i < factor->ftbl_cnt; i++)
+		if (den == factor->ftbl[i].den && num == factor->ftbl[i].num)
+			break;
+
+	if (i >= factor->ftbl_cnt) {
+		val &= ~(masks->num_mask << masks->num_shift);
+		val |= (factor->ftbl[0].num & masks->num_mask) <<
+			masks->num_shift;
+
+		val &= ~(masks->den_mask << masks->den_shift);
+		val |= (factor->ftbl[0].den & masks->den_mask) <<
+			masks->den_shift;
+
+		writel(val, factor->base);
+	}
+
+	if (factor->lock)
+		spin_unlock_irqrestore(factor->lock, flags);
+}
+
 static struct clk_ops clk_factor_ops = {
 	.recalc_rate = clk_factor_recalc_rate,
 	.round_rate = clk_factor_round_rate,
 	.set_rate = clk_factor_set_rate,
+	.init = clk_factor_init,
 };
 
 struct clk *mmp_clk_register_factor(const char *name, const char *parent_name,
-- 
1.8.3.2