[RFT v3 05/14] regulator: max77802: Don't ignore return value of current opmode

[Krzysztof Kozlowski]

The return value of regmap_read() of current opmode for regulator was
silently ignored and whatever happened to be in 'val' variable was used
as new opmode. This could lead to using bogus opmode.

Don't ignore what regmap_read() returns. If it fails just fall back to
normal opmode.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
---
 drivers/regulator/max77802.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/max77802.c b/drivers/regulator/max77802.c
index b9958d927297..60daca2028e9 100644
--- a/drivers/regulator/max77802.c
+++ b/drivers/regulator/max77802.c
@@ -606,7 +606,13 @@ static int max77802_pmic_probe(struct platform_device *pdev)
 		config.of_node = pdata->regulators[i].of_node;
 
 		ret = regmap_read(iodev->regmap, regulators[i].enable_reg, &val);
-		val = val >> shift & MAX77802_OPMODE_MASK;
+		if (ret < 0) {
+			dev_warn(&pdev->dev,
+				"cannot read current mode for %d\n", i);
+			val = MAX77802_OPMODE_NORMAL;
+		} else {
+			val = val >> shift & MAX77802_OPMODE_MASK;
+		}
 
 		/*
 		 * If the regulator is disabled and the system warm rebooted,
-- 
1.9.1