[PATCH] clk: rockchip: change PLL setting for better clock jitter

Heiko Stübner heiko at sntech.de
Wed Oct 29 12:51:50 PDT 2014


Am Donnerstag, 9. Oktober 2014, 22:23:57 schrieb Kever Yang:
> dclk_vop0/1 is the source of HDMI TMDS clock in rk3288, usually we
> use 594MHz for clock source of dclk_vop0/1.
> 
> HDMI CTS 7-9 require TMDS Clock jitter is lower than 0.25*Tbit:
> TMDS clock(MHz)		CTS require jitter (ps)
> 	297		84.2
> 	148.5		168
> 	74.25		336
> 	27		1247
> 
> PLL BW and VCO frequency effects the jitter of PLL output clock,
> clock jitter is better if BW is lower or VCO frequency is higher.
> 
> If PLL use default setting of RK3066_PLL_RATE( 594000000, 2, 198, 4),
> the TMDS Clock jitter is higher than 250ps, which means we can't
> pass the test when TMDS clock is 297MHz or 148.5MHz.
> 
> If we use RK3066_PLL_RATE_BWADJ(594000000, 1, 198, 8, 1),
> the TMDS Clock jitter is about 60ps and we can pass all test case.
> 
> So we need this patch to make hdmi si test pass.
> 
> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>

I've applied this to my v3.19-clk branch with Dougs Review-Tag.


Heiko



More information about the linux-arm-kernel mailing list