[PATCH 4/6] ARM: dts: sun9i: Add GPIO LEDs for A80 Optimus board

[Andreas Färber]

Hi,

Am 28.10.2014 um 21:16 schrieb Maxime Ripard:
> Hi Chen-Yu,
> 
> On Tue, Oct 28, 2014 at 05:50:41PM +0800, Chen-Yu Tsai wrote:
>> The A80 Optimus board has 3 usable LEDs that are controlled via GPIO.
>>
>> This patch adds support for 2 of them which are driver by GPIOs in the
>> main pin controller. The remaining one uses GPIO from the R_PIO
>> controller, which we don't support yet.
>>
>> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
>> ---
>>  arch/arm/boot/dts/sun9i-a80-optimus.dts | 25 +++++++++++++++++++++++++
>>  1 file changed, 25 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
>> index 25fe775..91eda76 100644
>> --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
>> +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
>> @@ -64,6 +64,13 @@
>>  				/* Enable internal pull-up */
>>  				allwinner,pull = <1>;
>>  			};
>> +
>> +			led_pins_optimus: led_pins at 0 {

Here too, led-pins at 0 would be more in line with DT conventions.

>> +				allwinner,pins = "PH0", "PH1";
>> +				allwinner,function = "gpio_out";
>> +				allwinner,drive = <0>;
>> +				allwinner,pull = <0>;
>> +			};
>>  		};
>>  
>>  		uart0: serial at 07000000 {
>> @@ -78,4 +85,22 @@
>>  			status = "okay";
>>  		};
>>  	};
>> +
>> +	leds {
>> +		compatible = "gpio-leds";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&led_pins_optimus>;
>> +
>> +		led2 {
>> +			label = "a80_optimus:led2:usr";
> 
> We're usually using a dash instead of an underscore as a separator.

I wonder, why a80_? The board is labeled "Allwinner Tech Optimus Board",
and the Cubietruck LEDs are not prefixed with a20_ either.

>> +			gpios = <&pio 7 0 0>;
>> +		};
>> +
>> +		/* led3 is on PM15, in R_PIO */
> 
> You were saying that there is three LEDs, why start the numbering at
> 2?

They are labeled "LED2", "LED4", "LED3" right-to-left.
Additionally there's a "PWR" LED, maybe that counts as number 1...

>> +
>> +		led4 {
>> +			label = "a80_optimus:led4:usr";
>> +			gpios = <&pio 7 1 0>;
>> +		};
>> +	};
>>  };
> 
> The rest of your patchset is fine for me, we just need to get the
> pinctrl driver merged first :)

Cheers,
Andreas

-- 
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141028/b4a122d3/attachment.sig>