[PATCH v14 5/5] ARM: dts: enable Thermal on rk3288-evb board
Dmitry Torokhov
dmitry.torokhov at gmail.com
Mon Oct 27 17:26:38 PDT 2014
On Mon, Oct 27, 2014 at 10:39:48AM +0800, Caesar Wang wrote:
> when a thermal temperature over TSHUT.Default to via
> CRU reset the entire chip on rk3288-evb Board,
> TSHUT is low active on rk3288-evb board.
>
> Signed-off-by: Caesar Wang <caesar.wang at rock-chips.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov at gmail.com>
> ---
> arch/arm/boot/dts/rk3288-evb.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
> index cb83cea..fb70523 100644
> --- a/arch/arm/boot/dts/rk3288-evb.dtsi
> +++ b/arch/arm/boot/dts/rk3288-evb.dtsi
> @@ -148,6 +148,12 @@
> status = "okay";
> };
>
> +&tsadc {
> + tsadc-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
> + tsadc-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
> + status = "okay";
> +};
> +
> &pinctrl {
> backlight {
> bl_en: bl-en {
> --
> 1.9.1
>
>
--
Dmitry
More information about the linux-arm-kernel
mailing list