[PATCH v3] rtc: omap: add support for pmic_power_en

[Felipe Balbi]

On Mon, Oct 27, 2014 at 05:56:54PM +0100, Johan Hovold wrote:
> On Mon, Oct 27, 2014 at 11:45:44AM -0500, Felipe Balbi wrote:
> > On Mon, Oct 27, 2014 at 09:09:28AM +0100, Johan Hovold wrote:
> > > Add new property "ti,system-power-controller" to register the RTC as a
> > > power-off handler.
> > > 
> > > Some RTC IP revisions can control an external PMIC via the pmic_power_en
> > > pin, which can be configured to transition to OFF on ALARM2 events and
> > > back to ON on subsequent ALARM (wakealarm) events.
> > > 
> > > This is based on earlier work by Colin Foe-Parker and AnilKumar Ch. [1]
> > > 
> > > [1] https://www.mail-archive.com/linux-omap@vger.kernel.org/msg82127.html
> > > 
> > > Tested-by: Felipe Balbi <balbi at ti.com>
> > > Signed-off-by: Johan Hovold <johan at kernel.org>
> > > ---
> > > 
> > > Changes since v2:
> > >  - add two-second delay to allow alarm to trigger before returning
> > > 
> > > Andrew, can you replace just this patch in the series that you already
> > > have in your tree, or do you prefer I resend the whole series (with
> > > Felipe's Tested-by tags)?
> > > 
> > > Thanks,
> > > Johan
> > > 
> > > 
> > >  Documentation/devicetree/bindings/rtc/rtc-omap.txt |  9 +-
> > >  drivers/rtc/rtc-omap.c                             | 95 ++++++++++++++++++++++
> > >  2 files changed, 103 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
> > > index 5a0f02d34d95..750efd40c72e 100644
> > > --- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt
> > > +++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
> > > @@ -5,11 +5,17 @@ Required properties:
> > >  	- "ti,da830-rtc"  - for RTC IP used similar to that on DA8xx SoC family.
> > >  	- "ti,am3352-rtc" - for RTC IP used similar to that on AM335x SoC family.
> > >  			    This RTC IP has special WAKE-EN Register to enable
> > > -			    Wakeup generation for event Alarm.
> > > +			    Wakeup generation for event Alarm. It can also be
> > > +			    used to control an external PMIC via the
> > > +			    pmic_power_en pin.
> > >  - reg: Address range of rtc register set
> > >  - interrupts: rtc timer, alarm interrupts in order
> > >  - interrupt-parent: phandle for the interrupt controller
> > >  
> > > +Optional properties:
> > > +- ti,system-power-controller: whether the rtc is controlling the system power
> > 
> > isn't there a discussion going on to drop the vendor prefix ? I wonder
> > if we should just use the final binding to avoid supporting this for
> > rtc-omap too. OTOH, all of that can be hidden under
> > of_is_system_power_controller() itself.
> 
> Exactly, Romain intends to support both versions (i.e. with and without
> the prefix) with his helper function as there are already other uses of
> this variant in the wild.
> 
> As I believe I mentioned in my cover letter, I suggest simply updating
> to the generic property name (i.e. use the helper and drop the prefix)
> once that code has been merged. Either way, we should always be able
> to change the property name before it has been used in a mainline
> release (as long as we update the driver and any dts use in one commit
> in order not to break bisectability).

fine by me :-) cheers

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141027/7e5fe957/attachment.sig>