[PATCH v2 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC
Ezequiel Garcia
ezequiel.garcia at free-electrons.com
Sat Oct 25 07:48:40 PDT 2014
The 25 MHz reference clock has better stability so its use is preferred over the
core clock. Change the Armada 375 clock initialization to use this reference
clock. To ensure the driver is compatible with an old devicetree, also provide
a fallback path which will silently return to the previous behavior.
While here, add the clock specification to the binding documentation.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
.../devicetree/bindings/watchdog/marvel.txt | 13 +++++++
drivers/watchdog/orion_wdt.c | 40 +++++++++++++++++++++-
2 files changed, 52 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt
index 97223fd..858ed92 100644
--- a/Documentation/devicetree/bindings/watchdog/marvel.txt
+++ b/Documentation/devicetree/bindings/watchdog/marvel.txt
@@ -17,6 +17,18 @@ For "marvell,armada-375-wdt" and "marvell,armada-380-wdt":
- reg : A third entry is mandatory and should contain the
shared mask/unmask RSTOUT address.
+Clocks required for compatibles = "marvell,orion-wdt",
+ "marvell,armada-370-wdt":
+- clocks : Must contain a single entry describing the clock input
+
+Clocks required for compatibles = "marvell,armada-xp-wdt"
+ "marvell,armada-375-wdt"
+ "marvell,armada-380-wdt":
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+ "nbclk" (L2/coherency fabric clock),
+ "fixed" (Reference 25 MHz fixed-clock).
+
Optional properties:
- interrupts : Contains the IRQ for watchdog expiration
@@ -30,4 +42,5 @@ Example:
interrupts = <3>;
timeout-sec = <10>;
status = "okay";
+ clocks = <&gate_clk 7>;
};
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index 00d0741..6452fa2 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -114,6 +114,44 @@ static int armada370_wdt_clock_init(struct platform_device *pdev,
return 0;
}
+static int armada375_wdt_clock_init(struct platform_device *pdev,
+ struct orion_watchdog *dev)
+{
+ int ret;
+
+ dev->clk = of_clk_get_by_name(pdev->dev.of_node, "fixed");
+ if (!IS_ERR(dev->clk)) {
+
+ ret = clk_prepare_enable(dev->clk);
+ if (ret) {
+ clk_put(dev->clk);
+ return ret;
+ }
+
+ atomic_io_modify(dev->reg + TIMER_CTRL,
+ WDT_AXP_FIXED_ENABLE_BIT,
+ WDT_AXP_FIXED_ENABLE_BIT);
+ dev->clk_rate = clk_get_rate(dev->clk);
+ return 0;
+ }
+
+ /* Mandatory fallback for proper devicetree backward compatibility */
+ dev->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(dev->clk))
+ return PTR_ERR(dev->clk);
+ ret = clk_prepare_enable(dev->clk);
+ if (ret) {
+ clk_put(dev->clk);
+ return ret;
+ }
+
+ atomic_io_modify(dev->reg + TIMER_CTRL,
+ WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT),
+ WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT));
+ dev->clk_rate = clk_get_rate(dev->clk) / WDT_A370_RATIO;
+ return 0;
+}
+
static int armadaxp_wdt_clock_init(struct platform_device *pdev,
struct orion_watchdog *dev)
{
@@ -394,7 +432,7 @@ static const struct orion_watchdog_data armada375_data = {
.rstout_mask_bit = BIT(10),
.wdt_enable_bit = BIT(8),
.wdt_counter_offset = 0x34,
- .clock_init = armada370_wdt_clock_init,
+ .clock_init = armada375_wdt_clock_init,
.enabled = armada375_enabled,
.start = armada375_start,
.stop = armada375_stop,
--
2.1.0
More information about the linux-arm-kernel
mailing list