[PATCH v12 00/15] arm: Fix DEBUG_LL for multi-platform kernels (without PL01X)
Arnd Bergmann
arnd at arndb.de
Fri Oct 24 08:46:53 PDT 2014
On Friday 24 October 2014 11:54:21 Daniel Thompson wrote:
> This patchset removes some single-platform compatibility tricks related
> to DEBUG_LL and, as a result, allows multi_v7_defconfig derived builds
> to enable DEBUG_LL. Currently the user selected kbuild setting is
> ignored and the PL01X's DEBUG_LL stub is silently selected instead. This
> is a pain if your hardware doesn't have this cell, not least because it
> takes a little time to figure out that kbuild built the wrong code.
>
Hi Daniel,
All the patches in your series look good to me this time. If Russell
has no further comments, I'd like to put them into a branch in arm-soc.
It has turned out that a lot of changes in Kconfig.debug are for adding
new platforms, so we have fewer conflicts if we take it this way.
I would actually have put the defconfig changes into a combined patch,
I don't see a reason to split those up by platform, but I don't mind
merging them the way you have them either.
There is still a related bug that we should also fix, but I'd say let's
take your current patches first and then add whatever is missing
on top. Specifically, a snippet like this
default 0xd4017000 if DEBUG_MMP_UART2
default 0xd4018000 if DEBUG_MMP_UART3
default 0xe0000000 if ARCH_SPEAR13XX
default 0xe4007000 if DEBUG_HIP04_UART
default 0xf0000be0 if ARCH_EBSA110
still means you get the wrong default when you build a multiplatform
kernel that you want to boot on HIP04 and you set DEBUG_HIP04_UART
but you happen to also have ARCH_SPEAR13XX enabled.
I have a patch that I use locally for randconfig builds that tries
to fix this. It has some overlaps with your work but most parts are
distinct. See below.
Arnd
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 64d0e21cf7e7..bb27d0b19197 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -211,6 +211,14 @@ choice
Say Y here if you want the debug print routines to direct
their output to the serial port in the DC21285 (Footbridge).
+ config DEBUG_EP93XX
+ bool "Kernel low-level debugging messages via ep93xx UART"
+ depends on ARCH_EP93XX
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Cirrus Logic EP93xx based platforms.
+
config DEBUG_FOOTBRIDGE_COM1
bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
depends on FOOTBRIDGE
@@ -218,6 +226,14 @@ choice
Say Y here if you want the debug print routines to direct
their output to the 8250 at PCI COM1.
+ config DEBUG_GEMINI
+ bool "Kernel low-level debugging messages via Cortina Systems Gemini UART"
+ depends on ARCH_GEMINI
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Cirrus Logic EP93xx based platforms.
+
config DEBUG_HI3620_UART
bool "Hisilicon HI3620 Debug UART"
depends on ARCH_HI3xxx
@@ -351,6 +367,14 @@ choice
Say Y here if you want kernel low-level debugging support
on i.MX6SX.
+ config DEBUG_INTEGRATOR
+ bool "Kernel low-level debugging messages via ARM Integrator UART"
+ depends on ARCH_INTEGRATOR
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Cirrus Logic EP93xx based platforms.
+
config DEBUG_KEYSTONE_UART0
bool "Kernel low-level debugging on KEYSTONE2 using UART0"
depends on ARCH_KEYSTONE
@@ -367,6 +391,14 @@ choice
Say Y here if you want the debug print routines to direct
their output to UART1 serial port on KEYSTONE2 devices.
+ config DEBUG_LPC32XX
+ bool "Kernel low-level debugging messages via NXP LPC32xx UART"
+ depends on ARCH_LPC32XX
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Cirrus Logic EP93xx based platforms.
+
config DEBUG_MESON_UARTAO
bool "Kernel low-level debugging via Meson6 UARTAO"
depends on ARCH_MESON
@@ -427,7 +459,7 @@ choice
config DEBUG_MVEBU_UART
bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)"
- depends on ARCH_MVEBU
+ depends on ARCH_MVEBU && CPU_V7
select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
@@ -440,25 +472,40 @@ choice
Plathome OpenBlocks AX3, when using the original
bootloader.
+ This option will not work on older Marvell platforms
+ (Kirkwood, Dove, MV78xx0, Orion5x), which should piock
+ the "new bootloader" variant.
+
If the wrong DEBUG_MVEBU_UART* option is selected,
when u-boot hands over to the kernel, the system
silently crashes, with no serial output at all.
config DEBUG_MVEBU_UART_ALTERNATE
bool "Kernel low-level debugging messages via MVEBU UART (new bootloaders)"
- depends on ARCH_MVEBU
+ depends on ARCH_MVEBU || ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || ARCH_ORION5X
select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
- on MVEBU based platforms.
+ on MVEBU based platforms (Armada XP, Armada 3xx, Kirkwood,
+ Dove, MV78xx0, Orion5x).
This option should be used with the new bootloaders
that remap the internal registers at 0xf1000000.
+ All of the older (pre Armada XP/370) platforms also use
+ this address, regardless of the boot loader version.
If the wrong DEBUG_MVEBU_UART* option is selected,
when u-boot hands over to the kernel, the system
silently crashes, with no serial output at all.
+ config DEBUG_MT6589_UART0
+ bool "Mediatek mt6589 UART0"
+ depends on ARCH_MEDIATEK
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ for Mediatek mt6589 based platforms on UART0.
+
config DEBUG_VF_UART
bool "Vybrid UART"
depends on SOC_VF610
@@ -823,6 +870,22 @@ choice
Say Y here if you want the debug print routines to direct
their output to the uart1 port on SiRFmarco devices.
+ config DEBUG_SPEAR3XX
+ bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART"
+ depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Cirrus Logic EP93xx based platforms.
+
+ config DEBUG_SPEAR13XX
+ bool "Kernel low-level debugging messages via ST SPEAr 13xx UART"
+ depends on ARCH_SPEAR13XX
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Cirrus Logic EP93xx based platforms.
+
config STIH41X_DEBUG_ASC2
bool "Use StiH415/416 ASC2 UART for low-level debug"
depends on ARCH_STI
@@ -860,13 +923,13 @@ choice
Say Y here if you want kernel low-level debugging support
on Ux500 based platforms.
- config DEBUG_MT6589_UART0
- bool "Mediatek mt6589 UART0"
- depends on ARCH_MEDIATEK
- select DEBUG_UART_8250
+ config DEBUG_VERSATILE
+ bool "Kernel low-level debugging messages via ARM Versatile UART"
+ depends on ARCH_VERSATILE
+ select DEBUG_UART_PL01X
help
Say Y here if you want kernel low-level debugging support
- for Mediatek mt6589 based platforms on UART0.
+ on Cirrus Logic EP93xx based platforms.
config DEBUG_VEXPRESS_UART0_DETECT
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
@@ -1078,20 +1141,13 @@ config DEBUG_LL_INCLUDE
# Compatibility options for PL01x
config DEBUG_UART_PL01X
- def_bool ARCH_EP93XX || \
- ARCH_INTEGRATOR || \
- ARCH_SPEAR3XX || \
- ARCH_SPEAR6XX || \
- ARCH_SPEAR13XX || \
- ARCH_VERSATILE
+ bool
# Compatibility options for 8250
config DEBUG_UART_8250
- def_bool ARCH_DOVE || ARCH_EBSA110 || \
- (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
- ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
- ARCH_IOP33X || ARCH_IXP4XX || \
- ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
+ def_bool ARCH_EBSA110 || (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
+ ARCH_IOP13XX || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || \
+ ARCH_RPC
# Compatibility options for BCM63xx
config DEBUG_UART_BCM63XX
@@ -1113,10 +1169,10 @@ config DEBUG_UART_PHYS
default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
default 0x10124000 if DEBUG_RK3X_UART0
default 0x10126000 if DEBUG_RK3X_UART1
- default 0x101f1000 if ARCH_VERSATILE
+ default 0x101f1000 if DEBUG_VERSATILE
default 0x101fb000 if DEBUG_NOMADIK_UART
default 0x11006000 if DEBUG_MT6589_UART0
- default 0x16000000 if ARCH_INTEGRATOR
+ default 0x16000000 if DEBUG_INTEGRATOR
default 0x18000300 if DEBUG_BCM_5301X
default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
default 0x20060000 if DEBUG_RK29_UART0
@@ -1125,9 +1181,9 @@ config DEBUG_UART_PHYS
default 0x20201000 if DEBUG_BCM2835
default 0x3e000000 if DEBUG_BCM_KONA_UART
default 0x4000e400 if DEBUG_LL_UART_EFM32
- default 0x40090000 if ARCH_LPC32XX
+ default 0x40090000 if DEBUG_LPC32XX
default 0x40100000 if DEBUG_PXA_UART1
- default 0x42000000 if ARCH_GEMINI
+ default 0x42000000 if DEBUG_GEMINI
default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
DEBUG_S3C2410_UART0)
default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
@@ -1140,24 +1196,22 @@ config DEBUG_UART_PHYS
default 0x80070000 if DEBUG_IMX23_UART
default 0x80074000 if DEBUG_IMX28_UART
default 0x80230000 if DEBUG_PICOXCELL_UART
- default 0x808c0000 if ARCH_EP93XX
+ default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX
default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
default 0xa9a00000 if DEBUG_MSM_UART
default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
default 0xc0013000 if DEBUG_U300_UART
default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
- default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
+ default 0xd0000000 if DEBUG_SPEAR3XX
default 0xd0012000 if DEBUG_MVEBU_UART
default 0xc81004c0 if DEBUG_MESON_UARTAO
default 0xd4017000 if DEBUG_MMP_UART2
default 0xd4018000 if DEBUG_MMP_UART3
- default 0xe0000000 if ARCH_SPEAR13XX
default 0xe4007000 if DEBUG_HIP04_UART
+ default 0xe0000000 if DEBUG_SPEAR13XX
default 0xf0000be0 if ARCH_EBSA110
default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE
- default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \
- ARCH_ORION5X
default 0xf7fc9000 if DEBUG_BERLIN_UART
default 0xf8b00000 if DEBUG_HIX5HD2_UART
default 0xf991e000 if DEBUG_QCOM_UARTDM
@@ -1174,7 +1228,7 @@ config DEBUG_UART_PHYS
DEBUG_LL_UART_EFM32 || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
- DEBUG_UART_BCM63XX
+ DEBUG_UART_BCM63XX || ARCH_EP93XX
config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
@@ -1185,14 +1239,15 @@ config DEBUG_UART_VIRT
default 0xf0201000 if DEBUG_BCM2835
default 0xf1000300 if DEBUG_BCM_5301X
default 0xf1006000 if DEBUG_MT6589_UART0
- default 0xf11f1000 if ARCH_VERSATILE
- default 0xf1600000 if ARCH_INTEGRATOR
+ default 0xf11f1000 if DEBUG_VERSATILE
+ default 0xf1600000 if DEBUG_INTEGRATOR
default 0xf1c28000 if DEBUG_SUNXI_UART0
default 0xf1c28400 if DEBUG_SUNXI_UART1
default 0xf1f02800 if DEBUG_SUNXI_R_UART
default 0xf2100000 if DEBUG_PXA_UART1
- default 0xf4090000 if ARCH_LPC32XX
- default 0xf4200000 if ARCH_GEMINI
+ default 0xf31004c0 if DEBUG_MESON_UARTAO
+ default 0xf4090000 if DEBUG_LPC32XX
+ default 0xf4200000 if DEBUG_GEMINI
default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
DEBUG_S3C2410_UART0)
default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
@@ -1208,12 +1263,10 @@ config DEBUG_UART_VIRT
default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
default 0xfcfe8600 if DEBUG_UART_BCM63XX
- default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
- default 0xfd000000 if ARCH_SPEAR13XX
- default 0xfd012000 if ARCH_MV78XX0
- default 0xfde12000 if ARCH_DOVE
- default 0xfe012000 if ARCH_ORION5X
- default 0xf31004c0 if DEBUG_MESON_UARTAO
+ default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
+ default 0xfd012000 if DEBUG_MVEBU_UART_ALTERNATE && ARCH_MV78XX0
+ default 0xfde12000 if DEBUG_MVEBU_UART_ALTERNATE && ARCH_DOVE
+ default 0xfe012000 if DEBUG_MVEBU_UART_ALTERNATE && ARCH_ORION5X
default 0xfe017000 if DEBUG_MMP_UART2
default 0xfe018000 if DEBUG_MMP_UART3
default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
@@ -1234,7 +1287,7 @@ config DEBUG_UART_VIRT
default 0xfed60000 if DEBUG_RK29_UART0
default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
- default 0xfedc0000 if ARCH_EP93XX
+ default 0xfedc0000 if DEBUG_EP93XX
default 0xfee003f8 if FOOTBRIDGE
default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
default 0xfee82340 if ARCH_IOP13XX
@@ -1269,7 +1322,7 @@ config DEBUG_UART_8250_WORD
config DEBUG_UART_8250_FLOW_CONTROL
bool "Enable flow control for 8250 UART"
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
- default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_GEMINI || ARCH_RPC
+ default y if ARCH_EBSA110 || FOOTBRIDGE || DEBUG_GEMINI || ARCH_RPC
config DEBUG_UNCOMPRESS
bool
More information about the linux-arm-kernel
mailing list