[PATCH 2/3] ARM: mediatek: add UART dts for mt8127 and mt8135
Matthias Brugger
matthias.bgg at gmail.com
Fri Oct 24 08:04:00 PDT 2014
2014-10-22 15:12 GMT+02:00 Eddie Huang <eddie.huang at mediatek.com>:
> This add dts support for mt8127 and mt8135 SOC UART
>
> Signed-off-by: Eddie Huang <eddie.huang at mediatek.com>
> ---
> arch/arm/boot/dts/mt8127.dtsi | 34 ++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/mt8135.dtsi | 36 ++++++++++++++++++++++++++++++++++++
> 2 files changed, 70 insertions(+)
>
> diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi
> index 25c9f69..249c218 100644
> --- a/arch/arm/boot/dts/mt8127.dtsi
> +++ b/arch/arm/boot/dts/mt8127.dtsi
> @@ -64,6 +64,12 @@
> clock-frequency = <32000>;
> #clock-cells = <0>;
> };
> +
> + uart_clk: dummy26m {
> + compatible = "fixed-clock";
> + clock-frequency = <26000000>;
> + #clock-cells = <0>;
> + };
> };
>
> soc {
> @@ -89,5 +95,33 @@
> <0 0x10214000 0 0x2000>,
> <0 0x10216000 0 0x2000>;
> };
> +
> + uart0: serial at 11006000 {
> + compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
> + reg = <0 0x11002000 0 0x400>;
> + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
As long as the interrupt polarity patches from Joe are not
merged,IRQ_TYPE_LEVEL_LOW triggers won't work as the GIC does not
support them.
> + clocks = <&uart_clk>;
> + };
> +
> + uart1: serial at 11007000 {
> + compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
> + reg = <0 0x11003000 0 0x400>;
> + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&uart_clk>;
> + };
> +
> + uart2: serial at 11008000 {
> + compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
> + reg = <0 0x11004000 0 0x400>;
> + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&uart_clk>;
> + };
> +
> + uart3: serial at 11009000 {
> + compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
> + reg = <0 0x11005000 0 0x400>;
> + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&uart_clk>;
> + };
> };
> };
> diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
> index 90a56ad..683b761 100644
> --- a/arch/arm/boot/dts/mt8135.dtsi
> +++ b/arch/arm/boot/dts/mt8135.dtsi
> @@ -86,6 +86,13 @@
> clock-frequency = <32000>;
> #clock-cells = <0>;
> };
> +
> + uart_clk: dummy26m {
> + compatible = "fixed-clock";
> + clock-frequency = <26000000>;
> + #clock-cells = <0>;
> + };
> +
> };
>
> soc {
> @@ -111,5 +118,34 @@
> <0 0x10214000 0 0x2000>,
> <0 0x10216000 0 0x2000>;
> };
> +
> + uart0: serial at 11006000 {
> + compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
> + reg = <0 0x11006000 0 0x400>;
> + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&uart_clk>;
> + };
> +
> + uart1: serial at 11007000 {
> + compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
> + reg = <0 0x11007000 0 0x400>;
> + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&uart_clk>;
> + };
> +
> + uart2: serial at 11008000 {
> + compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
> + reg = <0 0x11008000 0 0x400>;
> + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&uart_clk>;
> + };
> +
> + uart3: serial at 11009000 {
> + compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
> + reg = <0 0x11009000 0 0x400>;
> + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&uart_clk>;
> + };
> +
> };
> };
> --
> 1.8.1.1.dirty
>
--
motzblog.wordpress.com
More information about the linux-arm-kernel
mailing list