[PATCH v4 1/3] ARM: mediatek: Add basic support for mt6592
Matthias Brugger
matthias.bgg at gmail.com
Fri Oct 24 06:48:41 PDT 2014
2014-10-20 5:23 GMT+02:00 Howard Chen <ibanezchen at gmail.com>:
> * A dtsi for boards based on Mediatek MT6592 SoCs
> * Compatible string in arch/arm/mach-mediatek/mediatek.c
>
> Signed-off-by: Howard Chen <ibanezchen at gmail.com>
> ---
> arch/arm/boot/dts/mt6592.dtsi | 138 ++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-mediatek/mediatek.c | 1 +
> 2 files changed, 139 insertions(+)
> create mode 100644 arch/arm/boot/dts/mt6592.dtsi
>
> diff --git a/arch/arm/boot/dts/mt6592.dtsi b/arch/arm/boot/dts/mt6592.dtsi
> new file mode 100644
> index 0000000..367ba8f
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt6592.dtsi
> @@ -0,0 +1,138 @@
> +/*
> + * Copyright (c) 2014 MediaTek Inc.
> + * Author: Howard Chen <ibanezchen at gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include "skeleton.dtsi"
> +
> +/ {
> + compatible = "mediatek,mt6592";
> + interrupt-parent = <&gic>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x0>;
> + };
> + cpu at 1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x1>;
> + };
> + cpu at 2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x2>;
> + };
> + cpu at 3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x3>;
> + };
> + cpu at 4 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x4>;
> + };
> + cpu at 5 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x5>;
> + };
> + cpu at 6 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x6>;
> + };
> + cpu at 7 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x7>;
> + };
> + };
> +
> + system_clk: dummy13m {
> + compatible = "fixed-clock";
> + clock-frequency = <13000000>;
> + #clock-cells = <0>;
> + };
> +
> + rtc_clk: dummy32k {
> + compatible = "fixed-clock";
> + clock-frequency = <32000>;
> + #clock-cells = <0>;
> + };
> +
> + uart_clk: uart_clk {
> + compatible = "fixed-clock";
> + clock-frequency = <26000000>;
> + #clock-cells = <0>;
> + };
> +
> + timer: timer at 10008000 {
> + compatible = "mediatek,mt6577-timer";
> + reg = <0x10008000 0x80>;
> + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&system_clk>, <&rtc_clk>;
> + clock-names = "system-clk", "rtc-clk";
> + };
> +
> + gic: interrupt-controller at 10211000 {
> + compatible = "arm,cortex-a9-gic";
Should be arm,cortex-a7-gic, right?
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + reg = <0x10211000 0x1000>,
> + <0x10212000 0x1000>;
> + };
> +
> + uart0: serial at 11002000 {
> + compatible = "mediatek,mt6592-uart", "mediatek,mt6577-uart";
> + reg = <0x11002000 0x400>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
I tried this on v3.18-rc1 but it does not boot for me. I think this
depends on different bootloader on the different platforms.
This is critical for me. Can you send me your intpol register values,
so that I can check with my values when booting the kernel?
> + clocks = <&uart_clk>;
> + status = "disabled";
> + };
> +
> + uart1: serial at 11003000 {
> + compatible = "mediatek,mt6592-uart", "mediatek,mt6577-uart";
> + reg = <0x11003000 0x400>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&uart_clk>;
> + status = "disabled";
> + };
> +
> + uart2: serial at 11004000 {
> + compatible = "mediatek,mt6592-uart", "mediatek,mt6577-uart";
> + reg = <0x11004000 0x400>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&uart_clk>;
> + status = "disabled";
> + };
> +
> + uart3: serial at 11005000 {
> + compatible = "mediatek,mt6592-uart", "mediatek,mt6577-uart";
> + reg = <0x11005000 0x400>;
> + reg-shift = <2>;
> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&uart_clk>;
> + status = "disabled";
> + };
> +};
> diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
> index f2acf07..88e4626 100644
> --- a/arch/arm/mach-mediatek/mediatek.c
> +++ b/arch/arm/mach-mediatek/mediatek.c
> @@ -19,6 +19,7 @@
>
> static const char * const mediatek_board_dt_compat[] = {
> "mediatek,mt6589",
> + "mediatek,mt6592",
> NULL,
> };
>
> --
> 1.9.1
>
--
motzblog.wordpress.com
More information about the linux-arm-kernel
mailing list