[PATCH] serial: fsl-lpuart: add lpuart32 power management support

[Jingchang Lu]

This adds 32-bit register lpuart32 power management support,
this also updates the 8-bit register lpuart resume function.

Signed-off-by: Jingchang Lu <jingchang.lu at freescale.com>
---
 drivers/tty/serial/fsl_lpuart.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 6dd53af..4e25772 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1862,6 +1862,20 @@ static int lpuart_suspend(struct device *dev)
 static int lpuart_resume(struct device *dev)
 {
 	struct lpuart_port *sport = dev_get_drvdata(dev);
+	unsigned long temp;
+
+	if (sport->lpuart32) {
+		lpuart32_setup_watermark(sport);
+		temp = lpuart32_read(sport->port.membase + UARTCTRL);
+		temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE |
+			 UARTCTRL_TE | UARTCTRL_ILIE);
+		lpuart32_write(temp, sport->port.membase + UARTCTRL);
+	} else {
+		lpuart_setup_watermark(sport);
+		temp = readb(sport->port.membase + UARTCR2);
+		temp |= (UARTCR2_RIE | UARTCR2_TIE | UARTCR2_RE | UARTCR2_TE);
+		writeb(temp, sport->port.membase + UARTCR2);
+	}
 
 	uart_resume_port(&lpuart_reg, &sport->port);
 
-- 
1.8.0