[PATCH v3 00/27] Use MSI chip framework to configure MSI/MSI-X in all platforms

Bjorn Helgaas bhelgaas at google.com
Wed Oct 22 22:43:26 PDT 2014


On Wed, Oct 15, 2014 at 11:06:48AM +0800, Yijing Wang wrote:
> Now there are a lot of weak arch functions in MSI code.
> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm,
> that's a better solution than overriding lots of existing weak arch functionsin. 
> This series use MSI chip framework to refactor MSI code across all platforms 
> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> unified framework. Because this series changed a lot of ARCH MSI code, 
> so tests in the related platforms are warmly welcomed!
> 
> And you may access it at:
> https://github.com/YijingWang/msi-chip-v3.git master
> 
> v2->v3:
> 1. For patch "x86/xen/MSI: Eliminate...", introduce a new global flag "pci_msi_ignore_mask"
> to control the msi mask instead of replacing the irqchip->mask with nop function,
> the latter method has problem pointed out by Konrad Rzeszutek Wilk.
> 2. Save msi chip in arch pci sysdata instead of associating msi chip to pci bus.
> Because pci devices under same host share the same msi chip, so I think associate
> msi chip to pci host/pci sysdata is better than to bother every pci bus/devices.
> A better solution suggested by Liviu is to rip out pci_host_bridge from pci_create_root_bus(), 
> then we can save some pci host common attributes like domain_nr, msi_chip, resources,
> into the generic pci_host_bridge. Because this changes to pci host bridge is also 
> a large series, so I think we should go step by step, I will try to post it in another
> series later.
> 4. Clean up arm pcibios_add_bus() and pcibios_remove_bus() which were used to associate
> msi chip to pci bus.
> 
> v1->v2:
> Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
> and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.
> 
> RFC->v1: 
> Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
> of #ifdef to fix MSI bug in xen running in x86. 
> Rename arch_get_match_msi_chip() to arch_find_msi_chip().
> Drop use struct device as the msi_chip argument, we will do that
> later in another patchset.
> 
> Yijing Wang (27):

This is a lot of stuff, and it's not all related, so putting it all
together in one series makes it hard for me to deal with it.

>   MSI: Remove the redundant irq_set_chip_data()

This doesn't seem related to eliminating weak functions.

>   x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
>   s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()

These two seem to go together.

>   arm/MSI: Save MSI chip in pci_sys_data
>   PCI: tegra: Save msi chip in pci_sys_data
>   PCI: designware: Save msi chip in pci_sys_data
>   PCI: rcar: Save msi chip in pci_sys_data
>   PCI: mvebu: Save msi chip in pci_sys_data
>   arm/PCI: Clean unused pcibios_add_bus() and pcibios_remove_bus()
>   PCI/MSI: Remove useless bus->msi assignment

These seem to go together (it'd be nice if they were all capitalized the
same).

I don't like the "msi_chip" name because the "chip" part doesn't convey
much information, other than telling us that apparently some sort of
semiconductor integrated circuit is involved.  I sort of assumed that
much :)

Something like "msi_controller" would be more descriptive since we're
talking about an interrupt controller that accepts writes from a device and
turns them into CPU interrupts, e.g., a LAPIC.

>   PCI/MSI: Refactor struct msi_chip to make it become more common
>   x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   x86/MSI: Remove unused MSI weak arch functions
>   Mips/MSI: Save msi chip in pci sysdata
>   MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
>   MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   PCI/MSI: Clean up unused MSI arch functions
> 
>  arch/arm/include/asm/mach/pci.h                 |   10 +-
>  arch/arm/include/asm/pci.h                      |    9 ++
>  arch/arm/kernel/bios32.c                        |   19 +---
>  arch/arm/mach-iop13xx/include/mach/pci.h        |    4 +
>  arch/arm/mach-iop13xx/iq81340mc.c               |    3 +
>  arch/arm/mach-iop13xx/iq81340sc.c               |    5 +-
>  arch/arm/mach-iop13xx/msi.c                     |   11 ++-
>  arch/ia64/include/asm/pci.h                     |   10 ++
>  arch/ia64/kernel/msi_ia64.c                     |   14 ++-
>  arch/ia64/pci/pci.c                             |    1 +
>  arch/mips/include/asm/netlogic/xlp-hal/pcibus.h |    1 +
>  arch/mips/include/asm/octeon/pci-octeon.h       |    4 +
>  arch/mips/include/asm/pci.h                     |   14 +++
>  arch/mips/pci/msi-octeon.c                      |   31 +++---
>  arch/mips/pci/msi-xlp.c                         |   15 ++-
>  arch/mips/pci/pci-octeon.c                      |    3 +
>  arch/mips/pci/pci-xlp.c                         |    3 +
>  arch/mips/pci/pci-xlr.c                         |   17 +++-
>  arch/powerpc/include/asm/pci-bridge.h           |   15 +++
>  arch/powerpc/kernel/msi.c                       |   12 ++-
>  arch/powerpc/kernel/pci-common.c                |    3 +
>  arch/s390/include/asm/pci.h                     |    9 ++
>  arch/s390/pci/pci.c                             |   16 ++-
>  arch/sparc/kernel/pci.c                         |   14 ++-
>  arch/sparc/kernel/pci_impl.h                    |   12 ++
>  arch/tile/include/asm/pci.h                     |   10 ++
>  arch/tile/kernel/pci_gx.c                       |   13 ++-
>  arch/x86/include/asm/pci.h                      |   18 +++-
>  arch/x86/include/asm/x86_init.h                 |    7 --
>  arch/x86/kernel/apic/io_apic.c                  |   12 ++-
>  arch/x86/kernel/x86_init.c                      |   34 ------
>  arch/x86/pci/acpi.c                             |    1 +
>  arch/x86/pci/common.c                           |    3 +
>  arch/x86/pci/xen.c                              |   72 +++++++------
>  drivers/iommu/irq_remapping.c                   |   13 ++-
>  drivers/pci/host/pci-mvebu.c                    |   10 +--
>  drivers/pci/host/pci-tegra.c                    |   13 +--
>  drivers/pci/host/pcie-designware.c              |   15 +--
>  drivers/pci/host/pcie-rcar.c                    |   13 +--
>  drivers/pci/msi.c                               |  133 ++++++++++-------------
>  drivers/pci/probe.c                             |    1 -
>  include/linux/msi.h                             |   24 ++---
>  include/linux/pci.h                             |    1 +
>  43 files changed, 379 insertions(+), 269 deletions(-)

Huh.  I was hoping this was going to simplify things, and maybe it does
somehow, but it's unfortunate that it adds 110 lines of code overall.  Does
that seem right to you?  Why does it add code?

Who do you want to apply this?  I can take it if that makes the most sense,
but I'd like acks from the architecture folks for their pieces, and
especially one from Thomas for the overall direction and the x86 parts.

If you want me to take this, can you refresh it to be based on v3.18-rc1?
I tried to apply it on v3.18-rc1, but [15/27] didn't apply because of
conflicts in arch/x86/kernel/apic/io_apic.c.

I'll look at these more tomorrow, I'm getting bleary-eyed tonight.

Bjorn



More information about the linux-arm-kernel mailing list