[PATCH 5/7] ARM: mvebu: Enable Performance Monitor Unit on Armada 375 SoC

[Ezequiel Garcia]

Hi Mark,

Thanks for the reply. You made me research and test this in depth :)

On 10/22/2014 11:04 AM, Mark Rutland wrote:
> On Wed, Oct 22, 2014 at 02:43:45PM +0100, Ezequiel Garcia wrote:
>> The Armada 375 SoC has a Cortex-A9 CPU, and so the PMU is available
>> to be used. This commit enables it in the devicetree.
>>
>> Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
>> ---
>>  arch/arm/boot/dts/armada-375.dtsi | 5 +++++
>>  1 file changed, 5 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
>> index de65714..f131cd2 100644
>> --- a/arch/arm/boot/dts/armada-375.dtsi
>> +++ b/arch/arm/boot/dts/armada-375.dtsi
>> @@ -55,6 +55,11 @@
>>  		};
>>  	};
>>  
>> +	pmu {
>> +		compatible = "arm,cortex-a9-pmu";
>> +		interrupts-extended = <&mpic 3>;
>> +	};
> 
> Just to check - the interrupts from both CPUs are muxed into a single
> line into the interrupt controller?
> 
> This isn't gonig to work at the moment -- the perf code will associate
> this interrupt with CPU0 and you'll lose events on CPU1.
> 
> Hopefully there's a separate interrupt for CPU1?
> 

The <mpic 3> is a per CPU interrupt.

Actually, the interrupt contains more than just PMU events, it contains
a summary of several CPU events: Perf counters for each CPU, Power
management interrupts for each CPU, L2 cache interrupt, among others.

The interrupt cause can be read from a banked register called "CPU
subsystem local cause". Conversely, each of these must be enabled from
another (banked) register.

As far as I understand, this works (or should work) because the irqchip
driver enables *just* the perf counter interrupt for the running CPU in
the armada_xp_mpic_secondary_init(). Then, the ARM perf code requests
the interrupt as per cpu and things just work, right?

However:

1) In the Armada 375 SoC case, the MPIC is chained and the code does not
register the cpu notifier, so armada_xp_mpic_secondary_init is not
called on CPU1.

2) Even when ensuring armada_xp_mpic_secondary_init is called on each
CPU, and thus each perf counter interrupt is enabled, I can't see the
PMU interrupt for CPU1, but just the one for the boot CPU.

I'll check with the hardware designer about this.
-- 
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com