[PATCH v4 2/5] dt-bindings: Add a clocks property to the simple-framebuffer binding

[Hans de Goede]

A simple-framebuffer node represents a framebuffer setup by the firmware /
bootloader. Such a framebuffer may have a number of clocks in use, add a
property to communicate this to the OS.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
Reviewed-by: Mike Turquette <mturquette at linaro.org>
Acked-by: Geert Uytterhoeven <geert at linux-m68k.org>
Reviewed-by: Maxime Ripard <maxime.ripard at free-electrons.com>

--
Changes in v2:
-Added Reviewed-by: Mike Turquette <mturquette at linaro.org>
Changes in v3:
-Updated description to make clear simplefb deals with more then just memory
---
 Documentation/devicetree/bindings/video/simple-framebuffer.txt | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/video/simple-framebuffer.txt b/Documentation/devicetree/bindings/video/simple-framebuffer.txt
index 70c26f3..172ad5f 100644
--- a/Documentation/devicetree/bindings/video/simple-framebuffer.txt
+++ b/Documentation/devicetree/bindings/video/simple-framebuffer.txt
@@ -1,8 +1,8 @@
 Simple Framebuffer
 
-A simple frame-buffer describes a raw memory region that may be rendered to,
-with the assumption that the display hardware has already been set up to scan
-out from that buffer.
+A simple frame-buffer describes a frame-buffer setup by firmware or
+the bootloader, with the assumption that the display hardware has already
+been set up to scan out from the memory pointed to by the reg property.
 
 Required properties:
 - compatible: "simple-framebuffer"
@@ -14,6 +14,9 @@ Required properties:
   - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b).
   - a8b8g8r8 (32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r).
 
+Optional properties:
+- clocks : List of clocks used by the framebuffer
+
 Example:
 
 	framebuffer {
-- 
2.1.0