[PATCHv3 0/2] ARM: dts: socfpga: fix booting with SD/MMC

[dinguyen at opensource.altera.com]

From: Dinh Nguyen <dinguyen at opensource.altera.com>

The SOCFPGA dev kit was hanging during bootup on the SD/MMC driver loading.
The first patch fixes the booting and the 2nd patch adds a regulator node
for the SD/MMC driver to use.

v3 diff(s): Thanks to Doug Anderson, the real issue was that the GPIO bank used
by cd-gpios did not have status="okay" in the node. This cause the GPIO to not
get probed correctly.

In fact, prior to patch 3cf890fc42b "mmc: dw_mmc: Pass back errors from
mmc_of_parse()", the error was being masked, so it was not being detected.

v2 diff(s): Patch 2/2 ARM: dts: socfpga: Add a 3.3V fixed regulator node
        - Move the regulator nodes to their respective board dts file and
          correctly rename the regulator to match the schematic

Dinh Nguyen (2):
  ARM: dts: socfpga: Fix SD card detect
  ARM: dts: socfpga: Add a 3.3V fixed regulator node

 arch/arm/boot/dts/socfpga_arria5.dtsi         |  2 +-
 arch/arm/boot/dts/socfpga_arria5_socdk.dts    | 12 ++++++++++++
 arch/arm/boot/dts/socfpga_cyclone5_socdk.dts  | 15 +++++++++++++++
 arch/arm/boot/dts/socfpga_cyclone5_sockit.dts | 12 ++++++++++++
 4 files changed, 40 insertions(+), 1 deletion(-)

-- 
2.0.3