[PATCH v2 2/4] regulator: max77686: Implement suspend disable for some LDOs

[Krzysztof Kozlowski]

Some LDOs of Maxim 77686 PMIC support disabling during system suspend
(LDO{2,6,7,8,10,11,12,14,15,16}). This was already implemented as part
of set_suspend_mode function. In that case the mode was one of:
 - disable,
 - normal mode,
 - low power mode.
However there are no bindings for setting the mode during suspend.

Add suspend disable for LDO regulators supporting this to the existing
max77686_buck_set_suspend_disable() function. This helps reducing
energy consumption during system sleep.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
---
 drivers/regulator/max77686.c | 33 ++++++++++++++++++++++++++++-----
 1 file changed, 28 insertions(+), 5 deletions(-)

diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
index cffe0c69d57d..05df72d584bf 100644
--- a/drivers/regulator/max77686.c
+++ b/drivers/regulator/max77686.c
@@ -79,17 +79,33 @@ struct max77686_data {
 };
 
 /* Some BUCKS supports Normal[ON/OFF] mode during suspend */
-static int max77686_buck_set_suspend_disable(struct regulator_dev *rdev)
+static int max77686_set_suspend_disable(struct regulator_dev *rdev)
 {
 	unsigned int val;
 	struct max77686_data *max77686 = rdev_get_drvdata(rdev);
 	int ret, id = rdev_get_id(rdev);
 
-	if (id == MAX77686_BUCK1)
+	switch (id) {
+	case MAX77686_BUCK1:
 		val = MAX77686_OPMODE_OFF_PWRREQ;
-	else
+		break;
+	case MAX77686_BUCK2:
+	case MAX77686_BUCK3:
+	case MAX77686_BUCK4:
 		val = MAX77686_OPMODE_OFF_PWRREQ
 			<< MAX77686_OPMODE_BUCK234_SHIFT;
+		break;
+	case MAX77686_LDO2:
+	case MAX77686_LDO6 ... MAX77686_LDO8:
+	case MAX77686_LDO10 ... MAX77686_LDO12:
+	case MAX77686_LDO14 ... MAX77686_LDO16:
+		val = MAX77686_OPMODE_OFF_PWRREQ << MAX77686_OPMODE_SHIFT;
+		break;
+	default:
+		pr_warn("%s: regulator_suspend_disable not supported\n",
+			rdev->desc->name);
+		return -EINVAL;
+	}
 
 	ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 				 rdev->desc->enable_mask, val);
@@ -171,6 +187,9 @@ static int max77686_enable(struct regulator_dev *rdev)
 {
 	struct max77686_data *max77686 = rdev_get_drvdata(rdev);
 
+	if (max77686->opmode[rdev_get_id(rdev)] == MAX77686_OPMODE_OFF_PWRREQ)
+		max77686->opmode[rdev_get_id(rdev)] = MAX77686_OPMODE_NORMAL;
+
 	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 				  rdev->desc->enable_mask,
 				  max77686->opmode[rdev_get_id(rdev)]);
@@ -223,6 +242,8 @@ static struct regulator_ops max77686_ldo_ops = {
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
 	.set_suspend_mode	= max77686_ldo_set_suspend_mode,
+	.set_suspend_disable	= max77686_set_suspend_disable,
+	.set_suspend_enable	= max77686_enable,
 };
 
 static struct regulator_ops max77686_buck1_ops = {
@@ -234,7 +255,8 @@ static struct regulator_ops max77686_buck1_ops = {
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
-	.set_suspend_disable	= max77686_buck_set_suspend_disable,
+	.set_suspend_disable	= max77686_set_suspend_disable,
+	.set_suspend_enable	= max77686_enable,
 };
 
 static struct regulator_ops max77686_buck_dvs_ops = {
@@ -247,7 +269,8 @@ static struct regulator_ops max77686_buck_dvs_ops = {
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
 	.set_ramp_delay		= max77686_set_ramp_delay,
-	.set_suspend_disable	= max77686_buck_set_suspend_disable,
+	.set_suspend_disable	= max77686_set_suspend_disable,
+	.set_suspend_enable	= max77686_enable,
 };
 
 #define regulator_desc_ldo(num)		{				\
-- 
1.9.1