[PATCH v2 35/53] dmaengine: sh: Split device_control

[Laurent Pinchart]

Hi Maxime,

Thank you for the patch.

On Thursday 16 October 2014 12:17:34 Maxime Ripard wrote:
> Split the device_control callback of the Super-H DMA driver to make use of
> the newly introduced callbacks, that will eventually be used to retrieve
> slave capabilities.
> 
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> ---
>  drivers/dma/sh/shdma-base.c | 72 +++++++++++++++++++-----------------------
>  1 file changed, 35 insertions(+), 37 deletions(-)
> 
> diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c
> index 42d497416196..eda59515f704 100644
> --- a/drivers/dma/sh/shdma-base.c
> +++ b/drivers/dma/sh/shdma-base.c
> @@ -727,8 +727,7 @@ static struct dma_async_tx_descriptor
> *shdma_prep_dma_cyclic( return desc;
>  }
> 
> -static int shdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
> -			  unsigned long arg)
> +static int shdma_terminate_all(struct dma_chan *chan)
>  {
>  	struct shdma_chan *schan = to_shdma_chan(chan);
>  	struct shdma_dev *sdev = to_shdma_dev(chan->device);
> @@ -737,43 +736,41 @@ static int shdma_control(struct dma_chan *chan, enum
> dma_ctrl_cmd cmd, unsigned long flags;
>  	int ret;
> 
> -	switch (cmd) {
> -	case DMA_TERMINATE_ALL:
> -		spin_lock_irqsave(&schan->chan_lock, flags);
> -		ops->halt_channel(schan);
> +	spin_lock_irqsave(&schan->chan_lock, flags);
> +	ops->halt_channel(schan);
> 
> -		if (ops->get_partial && !list_empty(&schan->ld_queue)) {
> -			/* Record partial transfer */
> -			struct shdma_desc *desc = list_first_entry(&schan->ld_queue,
> -						struct shdma_desc, node);
> -			desc->partial = ops->get_partial(schan, desc);
> -		}
> +	if (ops->get_partial && !list_empty(&schan->ld_queue)) {
> +		/* Record partial transfer */
> +		struct shdma_desc *desc = list_first_entry(&schan->ld_queue,
> +							   struct shdma_desc, node);
> +		desc->partial = ops->get_partial(schan, desc);
> +	}
> 
> -		spin_unlock_irqrestore(&schan->chan_lock, flags);
> +	spin_unlock_irqrestore(&schan->chan_lock, flags);
> 
> -		shdma_chan_ld_cleanup(schan, true);
> -		break;
> -	case DMA_SLAVE_CONFIG:
> -		/*
> -		 * So far only .slave_id is used, but the slave drivers are
> -		 * encouraged to also set a transfer direction and an address.
> -		 */
> -		if (!arg)
> -			return -EINVAL;
> -		/*
> -		 * We could lock this, but you shouldn't be configuring the
> -		 * channel, while using it...
> -		 */
> -		config = (struct dma_slave_config *)arg;
> -		ret = shdma_setup_slave(schan, config->slave_id,
> -					config->direction == DMA_DEV_TO_MEM ?
> -					config->src_addr : config->dst_addr);
> -		if (ret < 0)
> -			return ret;
> -		break;
> -	default:
> -		return -ENXIO;
> -	}
> +	shdma_chan_ld_cleanup(schan, true);
> +
> +	return 0;
> +}
> +
> +static int shdma_config(struct dma_chan *chan,
> +			struct dma_slave_config *config)
> +{
> +	struct shdma_chan *schan = to_shdma_chan(chan);
> +
> +	/*
> +	 * So far only .slave_id is used, but the slave drivers are
> +	 * encouraged to also set a transfer direction and an address.
> +	 */
> +	if (!config)
> +		return -EINVAL;
> +	/*
> +	 * We could lock this, but you shouldn't be configuring the
> +	 * channel, while using it...
> +	 */
> +	return shdma_setup_slave(schan, config->slave_id,
> +				 config->direction == DMA_DEV_TO_MEM ?
> +				 config->src_addr : config->dst_addr);
> 
>  	return 0;

You can remove the return 0. With this fixed,

Acked-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

>  }
> @@ -1000,7 +997,8 @@ int shdma_init(struct device *dev, struct shdma_dev
> *sdev, /* Compulsory for DMA_SLAVE fields */
>  	dma_dev->device_prep_slave_sg = shdma_prep_slave_sg;
>  	dma_dev->device_prep_dma_cyclic = shdma_prep_dma_cyclic;
> -	dma_dev->device_control = shdma_control;
> +	dma_dev->device_config = shdma_config;
> +	dma_dev->device_terminate_all = shdma_terminate_all;
> 
>  	dma_dev->dev = dev;

-- 
Regards,

Laurent Pinchart