[PATCH 2/5] clk: sunxi: Add support for A80 basic bus clocks
Maxime Ripard
maxime.ripard at free-electrons.com
Thu Oct 16 01:31:03 PDT 2014
On Sun, Oct 12, 2014 at 05:40:22PM +0800, Chen-Yu Tsai wrote:
> The A80 SoC has 12 PLL clocks, 3 AHB clocks, 2 APB clocks, and a
> new "GT" bus, which I assume is some kind of data bus connecting
> the processor cores, memory and various busses. Also there is a
> bus clock for a ARM CCI400 module.
>
> As far as I can tell, the GT bus and CCI400 bus clock must be
> protected.
>
> This patch adds driver support for peripheral related PLLs and
> bus clocks on the A80. The GT and CCI400 clocks are added as well
> as these 2 along with the PLLs they are clocked from must not be
> disabled.
>
> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> ---
> Documentation/devicetree/bindings/clock/sunxi.txt | 5 +
> drivers/clk/sunxi/Makefile | 1 +
> drivers/clk/sunxi/clk-sun9i-core.c | 272 ++++++++++++++++++++++
> 3 files changed, 278 insertions(+)
> create mode 100644 drivers/clk/sunxi/clk-sun9i-core.c
>
> diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
> index ed116df..7f1c486 100644
> --- a/Documentation/devicetree/bindings/clock/sunxi.txt
> +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
> @@ -10,14 +10,17 @@ Required properties:
> "allwinner,sun4i-a10-pll1-clk" - for the main PLL clock and PLL4
> "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
> "allwinner,sun8i-a23-pll1-clk" - for the main PLL clock on A23
> + "allwinner,sun9i-a80-pll4-clk" - for the peripheral PLLs on A80
> "allwinner,sun4i-a10-pll5-clk" - for the PLL5 clock
> "allwinner,sun4i-a10-pll6-clk" - for the PLL6 clock
> "allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31
> + "allwinner,sun9i-a80-gt-clk" - for the GT bus clock on A80
> "allwinner,sun4i-a10-cpu-clk" - for the CPU multiplexer clock
> "allwinner,sun4i-a10-axi-clk" - for the AXI clock
> "allwinner,sun8i-a23-axi-clk" - for the AXI clock on A23
> "allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates
> "allwinner,sun4i-a10-ahb-clk" - for the AHB clock
> + "allwinner,sun9i-a80-ahb-clk" - for the AHB bus clocks on A80
> "allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10
> "allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
> "allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
> @@ -29,6 +32,7 @@ Required properties:
> "allwinner,sun4i-a10-apb0-clk" - for the APB0 clock
> "allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31
> "allwinner,sun8i-a23-apb0-clk" - for the APB0 clock on A23
> + "allwinner,sun9i-a80-apb0-clk" - for the APB0 bus clock on A80
> "allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10
> "allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
> "allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s
> @@ -36,6 +40,7 @@ Required properties:
> "allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20
> "allwinner,sun8i-a23-apb0-gates-clk" - for the APB0 gates on A23
> "allwinner,sun4i-a10-apb1-clk" - for the APB1 clock
> + "allwinner,sun9i-a80-apb1-clk" - for the APB1 bus clock on A80
> "allwinner,sun4i-a10-apb1-mux-clk" - for the APB1 clock muxing
> "allwinner,sun4i-a10-apb1-gates-clk" - for the APB1 gates on A10
> "allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13
> diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
> index 7ddc2b5..a66953c 100644
> --- a/drivers/clk/sunxi/Makefile
> +++ b/drivers/clk/sunxi/Makefile
> @@ -7,6 +7,7 @@ obj-y += clk-a10-hosc.o
> obj-y += clk-a20-gmac.o
> obj-y += clk-mod0.o
> obj-y += clk-sun8i-mbus.o
> +obj-y += clk-sun9i-core.o
>
> obj-$(CONFIG_MFD_SUN6I_PRCM) += \
> clk-sun6i-ar100.o clk-sun6i-apb0.o clk-sun6i-apb0-gates.o \
> diff --git a/drivers/clk/sunxi/clk-sun9i-core.c b/drivers/clk/sunxi/clk-sun9i-core.c
> new file mode 100644
> index 0000000..ba5f091
> --- /dev/null
> +++ b/drivers/clk/sunxi/clk-sun9i-core.c
> @@ -0,0 +1,272 @@
> +/*
> + * Copyright 2014 Chen-Yu Tsai
> + *
> + * Chen-Yu Tsai <wens at csie.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/clkdev.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/log2.h>
> +
> +#include "clk-factors.h"
> +
> +
> +/**
> + * sun9i_a80_get_pll4_factors() - calculates n, p, m factors for PLL1
> + * PLL4 rate is calculated as follows
> + * rate = (parent_rate * n >> p) / (m + 1);
> + * parent_rate is always 24Mhz
> + *
> + * p and m are named div1 and div2 in Allwinner's SDK
> + */
> +
> +static void sun9i_a80_get_pll4_factors(u32 *freq, u32 parent_rate,
> + u8 *n, u8 *k, u8 *m, u8 *p)
> +{
> + int div;
> +
> + /* Normalize value to a 6M multiple */
> + div = *freq / 6000000;
> +
> + /* divs above 256 cannot be odd */
> + if (div > 256)
> + div &= ~0x1;
> +
> + /* divs above 512 must be a multiple of 4 */
> + if (div > 512)
> + div &= ~0x3;
round_up / round_down looks more readable.
> +
> + *freq = 6000000 * div;
and here as well
> + /* we were called to round the frequency, we can now return */
> + if (n == NULL)
> + return;
> +
> + /* p will be 1 for divs under 512 */
> + if (div < 512)
> + *p = 1;
> + else
> + *p = 0;
> +
> + /* m will be 1 if div is odd */
> + if (div & 1)
> + *m = 1;
> + else
> + *m = 0;
> +
> + /* calculate a suitable n based on m and p */
> + *n = div / (*p + 1) / (*m + 1);
> +}
> +
> +static struct clk_factors_config sun9i_a80_pll4_config = {
> + .mshift = 18,
> + .mwidth = 1,
> + .nshift = 8,
> + .nwidth = 8,
> + .pshift = 16,
> + .pwidth = 1,
> +};
> +
> +static const struct factors_data sun9i_a80_pll4_data __initconst = {
> + .enable = 31,
> + .table = &sun9i_a80_pll4_config,
> + .getter = sun9i_a80_get_pll4_factors,
> +};
> +
> +static DEFINE_SPINLOCK(sun9i_a80_pll4_lock);
> +
> +static void __init sun9i_a80_pll4_setup(struct device_node *node)
> +{
> + sunxi_factors_register(node, &sun9i_a80_pll4_data, &sun9i_a80_pll4_lock);
> +}
> +CLK_OF_DECLARE(sun9i_a80_pll4, "allwinner,sun9i-a80-pll4-clk", sun9i_a80_pll4_setup);
> +
> +
> +/**
> + * sun9i_a80_get_gt_factors() - calculates m factor for GT
> + * GT rate is calculated as follows
> + * rate = parent_rate / (m + 1);
> + */
> +
> +static void sun9i_a80_get_gt_factors(u32 *freq, u32 parent_rate,
> + u8 *n, u8 *k, u8 *m, u8 *p)
> +{
> + u32 div;
> +
> + if (parent_rate < *freq)
> + *freq = parent_rate;
> +
> + div = DIV_ROUND_UP(parent_rate, *freq);
> +
> + /* maximum divider is 4 */
> + if (div > 4)
> + div = 4;
> +
> + *freq = parent_rate / div;
> +
> + /* we were called to round the frequency, we can now return */
> + if (!m)
> + return;
> +
> + *m = div;
> +}
> +
> +static struct clk_factors_config sun9i_a80_gt_config = {
> + .mshift = 0,
> + .mwidth = 2,
> +};
> +
> +static const struct factors_data sun9i_a80_gt_data __initconst = {
> + .mux = 24,
> + .muxmask = BIT(1) | BIT(0),
> + .table = &sun9i_a80_gt_config,
> + .getter = sun9i_a80_get_gt_factors,
> +};
> +
> +static DEFINE_SPINLOCK(sun9i_a80_gt_lock);
> +
> +static void __init sun9i_a80_gt_setup(struct device_node *node)
> +{
> + struct clk *gt = sunxi_factors_register(node, &sun9i_a80_gt_data,
> + &sun9i_a80_gt_lock);
> +
> + /* The GT bus clock needs to be always enabled */
> + __clk_get(gt);
> + clk_prepare_enable(gt);
> +}
> +CLK_OF_DECLARE(sun9i_a80_gt, "allwinner,sun9i-a80-gt-clk", sun9i_a80_gt_setup);
> +
> +
> +/**
> + * sun9i_a80_get_ahb_factors() - calculates p factor for AHB0/1/2
> + * AHB rate is calculated as follows
> + * rate = parent_rate >> p;
> + */
> +
> +static void sun9i_a80_get_ahb_factors(u32 *freq, u32 parent_rate,
> + u8 *n, u8 *k, u8 *m, u8 *p)
> +{
> + u32 _p;
> +
> + if (parent_rate < *freq)
> + *freq = parent_rate;
> +
> + _p = order_base_2(DIV_ROUND_UP(parent_rate, *freq));
> +
> + /* maximum p is 3 */
> + if (_p > 3)
> + _p = 3;
> +
> + *freq = parent_rate >> _p;
> +
> + /* we were called to round the frequency, we can now return */
> + if (!p)
> + return;
> +
> + *p = _p;
> +}
> +
> +static struct clk_factors_config sun9i_a80_ahb_config = {
> + .pshift = 0,
> + .pwidth = 2,
> +};
> +
> +static const struct factors_data sun9i_a80_ahb_data __initconst = {
> + .mux = 24,
> + .muxmask = BIT(1) | BIT(0),
> + .table = &sun9i_a80_ahb_config,
> + .getter = sun9i_a80_get_ahb_factors,
> +};
> +
> +static DEFINE_SPINLOCK(sun9i_a80_ahb_lock);
> +
> +static void __init sun9i_a80_ahb_setup(struct device_node *node)
> +{
> + sunxi_factors_register(node, &sun9i_a80_ahb_data, &sun9i_a80_ahb_lock);
> +}
> +CLK_OF_DECLARE(sun9i_a80_ahb, "allwinner,sun9i-a80-ahb-clk", sun9i_a80_ahb_setup);
> +
> +
> +static const struct factors_data sun9i_a80_apb0_data __initconst = {
> + .mux = 24,
> + .muxmask = BIT(0),
> + .table = &sun9i_a80_ahb_config,
> + .getter = sun9i_a80_get_ahb_factors,
> +};
> +
> +static DEFINE_SPINLOCK(sun9i_a80_apb0_lock);
> +
> +static void __init sun9i_a80_apb0_setup(struct device_node *node)
> +{
> + sunxi_factors_register(node, &sun9i_a80_apb0_data, &sun9i_a80_apb0_lock);
> +}
> +CLK_OF_DECLARE(sun9i_a80_apb0, "allwinner,sun9i-a80-apb0-clk", sun9i_a80_apb0_setup);
> +
> +
> +/**
> + * sun9i_a80_get_apb1_factors() - calculates m, p factors for APB1
> + * APB1 rate is calculated as follows
> + * rate = (parent_rate >> p) / (m + 1);
> + */
> +
> +static void sun9i_a80_get_apb1_factors(u32 *freq, u32 parent_rate,
> + u8 *n, u8 *k, u8 *m, u8 *p)
> +{
> + u32 div;
> + u8 calcm, calcp;
> +
> + if (parent_rate < *freq)
> + *freq = parent_rate;
> +
> + div = DIV_ROUND_UP(parent_rate, *freq);
> +
> + /* Highest possible divider is 256 (p = 3, m = 31) */
> + if (div > 256)
> + div = 256;
> +
> + calcp = order_base_2(div);
> + calcm = (parent_rate >> calcp) - 1;
> + *freq = (parent_rate >> calcp) / (calcm + 1);
> +
> + /* we were called to round the frequency, we can now return */
> + if (n == NULL)
> + return;
> +
> + *m = calcm;
> + *p = calcp;
> +}
> +
> +static struct clk_factors_config sun9i_a80_apb1_config = {
> + .mshift = 0,
> + .mwidth = 5,
> + .pshift = 16,
> + .pwidth = 2,
> +};
> +
> +static const struct factors_data sun9i_a80_apb1_data __initconst = {
> + .mux = 24,
> + .muxmask = BIT(0),
> + .table = &sun9i_a80_apb1_config,
> + .getter = sun9i_a80_get_apb1_factors,
> +};
> +
> +static DEFINE_SPINLOCK(sun9i_a80_apb1_lock);
> +
> +static void __init sun9i_a80_apb1_setup(struct device_node *node)
> +{
> + sunxi_factors_register(node, &sun9i_a80_apb1_data, &sun9i_a80_apb1_lock);
> +}
> +CLK_OF_DECLARE(sun9i_a80_apb1, "allwinner,sun9i-a80-apb1-clk", sun9i_a80_apb1_setup);
> +
Do these clocks share anything (aside from being for the A80) that
require them to be in the same file?
Thanks for your work!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141016/ce48b63c/attachment.sig>
More information about the linux-arm-kernel
mailing list