[RFC 0/7] ARM: vf610m4: Add Vybrid Cortex-M4 support
Stefan Agner
stefan at agner.ch
Sun Oct 12 11:13:54 PDT 2014
This adds Vybrid SoC support for the !MMU Cortex-M4 core. The patchset is
its current state is more a collection of hacks than anything mergabel,
advice and ideas how to beat it in good shape are welcome. I added some
thoughts as comments in the individual patches.
I wrote also some more info about Vybrid Cortex-M4 support in my blog
post:
http://falstaff.agner.ch/2014/10/05/make-it-two-tuxes-on-one-soc/
One thing I noticed that when I move the xipImage below the DRAM base
address, the kernel freezes:
...
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[freeze]
I think it happens when the scheduler gets started. Any idea what could
go wrong here?
Stefan Agner (7):
ARM: vf610: add low level debug support for !MMU
clocksource: add dependencies for Vybrid pit clocksource
ARM: vf610m4: add new machine and SoC for Vybrid on Cortex-M4
ARM: dts: add support for Vybrid running on Cortex-M4
irqchip: nvic: increase number of external interrupts to 112
ARM: vf610m4: HACK: get dtb pointer from SRC_GPR3
ARM: vf610m4: add defconfig for Linux on Vybrids Cortex-M4
arch/arm/Kconfig | 12 ++++
arch/arm/Kconfig.debug | 4 +-
arch/arm/Makefile | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/armv7-m.dtsi | 1 -
arch/arm/boot/dts/vf610m4.dts | 144 +++++++++++++++++++++++++++++++++++++
arch/arm/configs/vf610m4_defconfig | 37 ++++++++++
arch/arm/include/debug/vf.S | 10 +++
arch/arm/kernel/entry-v7m.S | 4 +-
arch/arm/kernel/head-nommu.S | 8 +++
arch/arm/mach-imx/Kconfig | 22 ++++++
arch/arm/mach-imx/Makefile | 1 +
arch/arm/mach-imx/Makefile.boot | 0
arch/arm/mach-imx/mach-vf610m4.c | 16 +++++
drivers/clocksource/Kconfig | 2 +
drivers/irqchip/irq-nvic.c | 2 +
drivers/mmc/host/Kconfig | 2 +-
drivers/pinctrl/Kconfig | 2 +-
18 files changed, 262 insertions(+), 7 deletions(-)
create mode 100644 arch/arm/boot/dts/vf610m4.dts
create mode 100644 arch/arm/configs/vf610m4_defconfig
create mode 100644 arch/arm/mach-imx/Makefile.boot
create mode 100644 arch/arm/mach-imx/mach-vf610m4.c
--
2.1.2
More information about the linux-arm-kernel
mailing list