[PATCHv6 2/3] pwm: make the PWM_POLARITY flag in DTB optional

[Lothar Waßmann]

Change the pwm chip driver registration, so that a chip driver that
supports polarity inversion can still be used with DTBs that don't
provide the 'PWM_POLARITY' flag.

This is done to provide polarity inversion support for the pwm-imx
driver without having to modify all existing DTS files.

Signed-off-by: Lothar Waßmann <LW at KARO-electronics.de>
---
 drivers/pwm/core.c |   27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)

diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 130bbea..0ff1bb0 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -136,9 +136,14 @@ of_pwm_xlate_with_flags(struct pwm_chip *pc, const struct of_phandle_args *args)
 {
 	struct pwm_device *pwm;
 
+	/* check, whether the driver supports a third cell for flags */
 	if (pc->of_pwm_n_cells < 3)
 		return ERR_PTR(-EINVAL);
 
+	/* flags in the third cell are optional */
+	if (args->args_count < 2)
+		return ERR_PTR(-EINVAL);
+
 	if (args->args[0] >= pc->npwm)
 		return ERR_PTR(-EINVAL);
 
@@ -148,10 +153,12 @@ of_pwm_xlate_with_flags(struct pwm_chip *pc, const struct of_phandle_args *args)
 
 	pwm_set_period(pwm, args->args[1]);
 
-	if (args->args[2] & PWM_POLARITY_INVERTED)
-		pwm_set_polarity(pwm, PWM_POLARITY_INVERSED);
-	else
-		pwm_set_polarity(pwm, PWM_POLARITY_NORMAL);
+	if (args->args_count > 2) {
+		if (args->args[2] & PWM_POLARITY_INVERTED)
+			pwm_set_polarity(pwm, PWM_POLARITY_INVERSED);
+		else
+			pwm_set_polarity(pwm, PWM_POLARITY_NORMAL);
+	}
 
 	return pwm;
 }
@@ -162,9 +169,14 @@ of_pwm_simple_xlate(struct pwm_chip *pc, const struct of_phandle_args *args)
 {
 	struct pwm_device *pwm;
 
+	/* sanity check driver support */
 	if (pc->of_pwm_n_cells < 2)
 		return ERR_PTR(-EINVAL);
 
+	/* all cells are required */
+	if (args->args_count != pc->of_pwm_n_cells)
+		return ERR_PTR(-EINVAL);
+
 	if (args->args[0] >= pc->npwm)
 		return ERR_PTR(-EINVAL);
 
@@ -536,13 +548,6 @@ struct pwm_device *of_pwm_get(struct device_node *np, const char *con_id)
 		goto put;
 	}
 
-	if (args.args_count != pc->of_pwm_n_cells) {
-		pr_debug("%s: wrong #pwm-cells for %s\n", np->full_name,
-			 args.np->full_name);
-		pwm = ERR_PTR(-EINVAL);
-		goto put;
-	}
-
 	pwm = pc->of_xlate(pc, &args);
 	if (IS_ERR(pwm))
 		goto put;
-- 
1.7.10.4