[PATCH 00/21] thermal: exynos: Thermal code rework to use device tree
Lukasz Majewski
l.majewski at samsung.com
Thu Oct 9 09:38:36 PDT 2014
1. Introduction
Following patches aim to clean up the current implementation of the thermal
framework on Exynos devices.
The main goal was to use a generic code for reading thermal configuration
(of-thermal.c). Due to that redundant exynos_thermal_common.[h|c] files
were removed.
Around 400 lines of code (LOC) were removed directly by this patch, which
is around 20% of the Exynos thermal code base.
This work should NOT bring any functional changes to Exynos thermal
subsystem.
2. Patch-set structure
This series starts with extending current of-thermal.c implementation with
exporting information about trip points and support for setting emulated
temperature. Those changes were necessary to reuse this code in Exynos.
Then the cpu_cooling functionality has been preserved to allow cooling
devices by reducing operating frequency. Definition of trip points and
cpufreq's cooling properties were moved to device tree.
Then the rework of the way in which configuration data is provided to
the Exynos thermal subsystem was performed. Now device tree is used for
configuration.
Patch series end with removing exynos5250/exynos3250 TMU compatibles.
Both SoCs have thermal management unit (TMU) compatible with the one first
introduced at Exynos4412.
3. Dead code removal
Thermal support for some SoCs, previously available in the exynos_tmu_data.c
file, was removed since, as of 3.17-rc6, they didn't have TMU bindings.
Moreover, support for cpu_cooling devices was preserved only on those
SoCs which had available and working cpufreq driver.
4. Testing
Test devices:
- Exynos4210 - Trats (TMU zone + cpu_cooling)
- Exynos4412 - Trats2/Odroid U3 (TMU zone + cpu_cooling)
- Exynos5250 - Arndale (TMU zone + cpu_cooling)
- Exynos5420 - Arndale-octa (only TMU zones)
Unfortunately, I don't posses Exynos5440 for testing. Its functionality
has been preserved in the code, but not tested on the hardware. I would
be grateful for help in testing.
5. Prerequisites:
This work requires following patches developed by Bartlomiej Zolnierkiewicz:
5.1. [PATCH v3] ARM: dts: add CPU nodes for Exynos4 SoCs
http://article.gmane.org/gmane.linux.kernel.samsung-soc/37946/match=patch+v3+arm+dts+add+cpu+nodes+exynos4+socs
5.2. First thermal clean up patch set (from patch 1 to 33):
[PATCH 00/33] thermal: exynos: convert the driver to use per-SoC type operations
http://article.gmane.org/gmane.linux.kernel.samsung-soc/37642/match=patch+00+33+thermal+exynos+convert+driver+use+per+soc+type+operations
Lukasz Majewski (21):
thermal: of: Extend of-thermal.c to provide number of trip points
thermal: of: Extend of-thermal.c to provide check if trip point is
enabled
thermal: of: Extend of-thermal.c to provide number of non critical
trip points
thermal: of: Extend current of-thermal.c code to allow setting
emulated temp
thermal: exynos: cosmetic: Correct comment format
thermal: exynos: Provide thermal_exynos.h file to be included in
device tree files
thermal: dts: trats: Enable TMU on the Exynos4210 trats device
thermal: dts: exynos: Adding LD010 regulator node necessary for TMU on
Odroid U3 board
thermal: dts: Provide bindings and enable TMU at Exynos4x12 devices
thermal: cpu_cooling: dts: Define device tree bindings for Exynos cpu
cooling functionality
thermal: cpu_cooling: Modify exynos thermal code to use device tree
for cpu cooling configuration
thermal: exynos: dts: Add default definition for the TMU sensor
thermal: dts: Default trip points definition for Exynos5420 SoCs
thermal: exynos: dts: Define default thermal-zones for Exynos4
thermal: dts: exynos: Trip points and sensor configuration data for
Exynos5440
thermal: exynos: dts: Provide device tree bindings identical to one in
exynos_tmu_data.c
thermal: samsung: core: Exynos TMU rework to use device tree for
configuration
thermal: exynos: Remove exynos_thermal_common.[c|h] files
thermal: exynos: Remove exynos_tmu_data.c file
thermal: exynos: Make Exynos5250 TMU compatible with Exynos4412
thermal: exynos: Make Exynos3250 TMU compatible with Exynos4412
arch/arm/boot/dts/exynos4-cpu-thermal.dtsi | 52 +++
arch/arm/boot/dts/exynos4.dtsi | 5 +
arch/arm/boot/dts/exynos4210-trats.dts | 19 +
arch/arm/boot/dts/exynos4210.dtsi | 28 +-
arch/arm/boot/dts/exynos4212.dtsi | 5 +-
arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 27 ++
arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi | 24 ++
arch/arm/boot/dts/exynos4412.dtsi | 5 +-
arch/arm/boot/dts/exynos4x12.dtsi | 13 +
arch/arm/boot/dts/exynos5250.dtsi | 29 +-
arch/arm/boot/dts/exynos5420-trip-points.dtsi | 35 ++
arch/arm/boot/dts/exynos5420.dtsi | 33 ++
arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi | 25 ++
arch/arm/boot/dts/exynos5440-trip-points.dtsi | 25 ++
arch/arm/boot/dts/exynos5440.dtsi | 18 +
drivers/cpufreq/exynos-cpufreq.c | 23 +-
drivers/thermal/of-thermal.c | 52 ++-
drivers/thermal/samsung/Makefile | 2 -
drivers/thermal/samsung/exynos_thermal_common.c | 430 ----------------------
drivers/thermal/samsung/exynos_thermal_common.h | 106 ------
drivers/thermal/samsung/exynos_tmu.c | 283 +++++++-------
drivers/thermal/samsung/exynos_tmu.h | 79 +---
drivers/thermal/samsung/exynos_tmu_data.c | 264 -------------
drivers/thermal/thermal_core.h | 15 +
include/dt-bindings/thermal/thermal_exynos.h | 40 ++
include/linux/thermal.h | 6 +-
26 files changed, 623 insertions(+), 1020 deletions(-)
create mode 100644 arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
create mode 100644 arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
create mode 100644 arch/arm/boot/dts/exynos5420-trip-points.dtsi
create mode 100644 arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
create mode 100644 arch/arm/boot/dts/exynos5440-trip-points.dtsi
delete mode 100644 drivers/thermal/samsung/exynos_thermal_common.c
delete mode 100644 drivers/thermal/samsung/exynos_thermal_common.h
delete mode 100644 drivers/thermal/samsung/exynos_tmu_data.c
create mode 100644 include/dt-bindings/thermal/thermal_exynos.h
--
2.0.0.rc2
More information about the linux-arm-kernel
mailing list