[PATCH v3 5/7] ARM: mediatek: Add sysirq in mt6589/mt8135/mt8127 dtsi
Joe.C
yingjoe.chen at mediatek.com
Thu Oct 9 07:29:38 PDT 2014
From: "Joe.C" <yingjoe.chen at mediatek.com>
Add sysirq settings for mt6589/mt8135/mt8127
This also correct timer interrupt flag. The old flag setting
works because boot loader already set polarity for timer
interrupt. Without intpol support, the setting was not changed
so gic can get the irq correctly.
Signed-off-by: Joe.C <yingjoe.chen at mediatek.com>
---
arch/arm/boot/dts/mt6589.dtsi | 14 ++++++++++++--
arch/arm/boot/dts/mt8127.dtsi | 14 ++++++++++++--
arch/arm/boot/dts/mt8135.dtsi | 14 ++++++++++++--
3 files changed, 36 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi
index e3c7600..9f3e6b9 100644
--- a/arch/arm/boot/dts/mt6589.dtsi
+++ b/arch/arm/boot/dts/mt6589.dtsi
@@ -19,7 +19,7 @@
/ {
compatible = "mediatek,mt6589";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&sysirq>;
cpus {
#address-cells = <1>;
@@ -76,15 +76,25 @@
timer: timer at 10008000 {
compatible = "mediatek,mt6577-timer";
reg = <0x10008000 0x80>;
- interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
clocks = <&system_clk>, <&rtc_clk>;
clock-names = "system-clk", "rtc-clk";
};
+ sysirq: interrupt-controller at 10200100 {
+ compatible = "mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10200100 0 0x1c>;
+ };
+
gic: interrupt-controller at 10211000 {
compatible = "arm,cortex-a7-gic";
interrupt-controller;
#interrupt-cells = <3>;
+ arm,irq-domain-hierarchy;
+ interrupt-parent = <&gic>;
reg = <0x10211000 0x1000>,
<0x10212000 0x1000>,
<0x10214000 0x2000>,
diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi
index 25c9f69..b2a17ba 100644
--- a/arch/arm/boot/dts/mt8127.dtsi
+++ b/arch/arm/boot/dts/mt8127.dtsi
@@ -18,7 +18,7 @@
/ {
compatible = "mediatek,mt8127";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&sysirq>;
cpus {
#address-cells = <1>;
@@ -75,15 +75,25 @@
timer: timer at 10008000 {
compatible = "mediatek,mt8127-timer", "mediatek,mt6577-timer";
reg = <0 0x10008000 0 0x80>;
- interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
clocks = <&system_clk>, <&rtc_clk>;
clock-names = "system-clk", "rtc-clk";
};
+ sysirq: interrupt-controller at 10200100 {
+ compatible = "mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10200100 0 0x1c>;
+ };
+
gic: interrupt-controller at 10211000 {
compatible = "arm,cortex-a7-gic";
interrupt-controller;
#interrupt-cells = <3>;
+ arm,irq-domain-hierarchy;
+ interrupt-parent = <&gic>;
reg = <0 0x10211000 0 0x1000>,
<0 0x10212000 0 0x1000>,
<0 0x10214000 0 0x2000>,
diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index 90a56ad..bc2e520 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -18,7 +18,7 @@
/ {
compatible = "mediatek,mt8135";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&sysirq>;
cpu-map {
cluster0 {
@@ -97,15 +97,25 @@
timer: timer at 10008000 {
compatible = "mediatek,mt8135-timer", "mediatek,mt6577-timer";
reg = <0 0x10008000 0 0x80>;
- interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
clocks = <&system_clk>, <&rtc_clk>;
clock-names = "system-clk", "rtc-clk";
};
+ sysirq: interrupt-controller at 10200030 {
+ compatible = "mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10200030 0 0x1c>;
+ };
+
gic: interrupt-controller at 10211000 {
compatible = "arm,cortex-a15-gic";
interrupt-controller;
#interrupt-cells = <3>;
+ arm,irq-domain-hierarchy;
+ interrupt-parent = <&gic>;
reg = <0 0x10211000 0 0x1000>,
<0 0x10212000 0 0x1000>,
<0 0x10214000 0 0x2000>,
--
1.8.1.1.dirty
More information about the linux-arm-kernel
mailing list