[PATCH v2 0/4] regulator: Fix core behaviour for gpio 0

[Markus Pargmann]

Hi,

In v2 of this series I renamed the added regulator_config field
'ena_gpio_valid' to 'ena_gpio_initialized'. We have a gpio_is_valid check in
the regulator core code, so no need to require a valid ena_gpio. It should
avoid a lot of gpio_is_valid checks in regulator drivers.

v2 is also backward compatible now, so if ena_gpio_initialized is false, it
will still handle gpios > 0. There are some more changes on the regulator
driver patches, which now do not set ena_gpio_initialized for pdata code.

This series fixes the handling of gpio 0 in the regulator framework.

Best regards,

Markus


Markus Pargmann (4):
  regulator: Add ena_gpio_initialized to regulator_config
  regulator: Set ena_gpio_initialized in regulator drivers
  regulator: fixed: Use gpio_is_valid
  regulator: gpio: Use gpio_is_valid

 drivers/regulator/arizona-ldo1.c       | 1 +
 drivers/regulator/core.c               | 3 ++-
 drivers/regulator/fixed.c              | 4 +++-
 drivers/regulator/gpio-regulator.c     | 4 +++-
 drivers/regulator/max8952.c            | 2 ++
 drivers/regulator/s2mps11.c            | 1 +
 drivers/regulator/s5m8767.c            | 1 +
 drivers/regulator/tps65090-regulator.c | 1 +
 drivers/regulator/wm8994-regulator.c   | 6 ++++--
 include/linux/regulator/driver.h       | 4 ++++
 10 files changed, 22 insertions(+), 5 deletions(-)

-- 
2.1.0