[PATCH V3 0/6] Add initial support for Broadcom Cygnus SoC
Scott Branden
sbranden at broadcom.com
Tue Oct 7 22:26:59 PDT 2014
This patchset contains initial support for Broadcom's Cygnus SoC based on our
iProc architecture. Initial support is minimal and includes just the mach
platform code, clock driver, and a basic device tree configuration. Peripheral
drivers will be submitted soon, as will device tree configurations for other
Cygnus board variants.
Changes from v2:
- rebased to 3.17 kernel
Changes from v1:
- Address code review comments as per previous responses.
- Copyright headers updated to remove Broadcom URL.
- mach platform code still contains hard coded addresses. These address are
the same for all Cygnus variants. Could you please provide guidance on where
they should go if you would still like them changed. There does not seem to
be a reason to change them to device tree as they do not change.
Jonathan Richardson (6):
ARM: cygnus: Initial support for Broadcom Cygnus SoC
clk: Clock driver support for Broadcom Cygnus SoC
dt-bindings: Document Broadcom Cygnus SoC and clock driver
ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC
ARM: dts: Enable Broadcom Cygnus SoC
MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock
drivers
Documentation/devicetree/bindings/arm/cygnus.txt | 12 +
.../devicetree/bindings/clock/clk-cygnus.txt | 121 ++
.../devicetree/bindings/clock/clk-iproc.txt | 48 +
MAINTAINERS | 15 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm-cygnus.dtsi | 349 ++++++
arch/arm/boot/dts/bcm911360_entphn.dts | 22 +
arch/arm/configs/bcm_cygnus_defconfig | 222 ++++
arch/arm/mach-bcm/Kconfig | 31 +
arch/arm/mach-bcm/Makefile | 3 +
arch/arm/mach-bcm/bcm_cygnus.c | 166 +++
drivers/clk/Makefile | 1 +
drivers/clk/bcm/Makefile | 2 +
drivers/clk/bcm/clk-cygnus.c | 1186 ++++++++++++++++++++
drivers/clk/bcm/clk-iproc.c | 451 ++++++++
15 files changed, 2630 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/cygnus.txt
create mode 100644 Documentation/devicetree/bindings/clock/clk-cygnus.txt
create mode 100644 Documentation/devicetree/bindings/clock/clk-iproc.txt
create mode 100644 arch/arm/boot/dts/bcm-cygnus.dtsi
create mode 100644 arch/arm/boot/dts/bcm911360_entphn.dts
create mode 100644 arch/arm/configs/bcm_cygnus_defconfig
create mode 100644 arch/arm/mach-bcm/bcm_cygnus.c
create mode 100644 drivers/clk/bcm/clk-cygnus.c
create mode 100644 drivers/clk/bcm/clk-iproc.c
--
1.7.9.5
More information about the linux-arm-kernel
mailing list