[PATCH 2/4] ARM: qcom: add description of KPSS WDT for IPQ8064

[Stephen Boyd]

On 10/07/2014 03:10 PM, Josh Cartwright wrote:
> On Thu, Oct 02, 2014 at 12:08:38PM -0700, Stephen Boyd wrote:
> [..]
>> On 10/01/14 11:15, Josh Cartwright wrote:
>>> Something like this perhaps:
>>>
>>> 	timer at 200a000 {
>>> 		compatible = "qcom,kpss-timer", "qcom,msm-timer";
>>> 		interrupts = <1 1 0x301>,
>>> 			     <1 2 0x301>,
>>> 			     <1 3 0x301>;
>>> 		reg = <0x0200a000 0x100>;
>>> 		clock-frequency = <25000000>,
>>> 				  <32768>;
>>> 		cpu-offset = <0x80000>;
>>>
>>> 		#address-cells = <1>;
>>> 		#size-cells = <1>;
>>> 		ranges;
>>>
>>> 		cpu0_wdt0: watchdog at 208a038 {
>>> 			compatible = "qcom,kpss-wdt";
>>> 			reg = <0x208a038 0x40>;
>>> 			interrupts = <1 4 0x301>,
>>> 			clocks = <&sleep_clk>;
>>> 			timeout-sec = <10>;
>>> 			cpu = <&cpu0>;
>>> 		};
>>>
>>> 		cpu0_wdt1: watchdog at 208a060 {
>>> 			compatible = "qcom,kpss-wdt";
>>> 			reg = <0x208a060 0x40>;
>>> 			interrupts = <1 5 0x301>,
>>> 			clocks = <&sleep_clk>;
>>> 			timeout-sec = <20>;
>>> 			cpu = <&cpu0>;
>>> 		};
>>>
>>> 		cpu1_wdt0: watchdog at 209a038 {
>>> 			compatible = "qcom,kpss-wdt";
>>> 			reg = <0x209a038 0x40>;
>>> 			interrupts = <1 4 0x301>,
>>> 			clocks = <&sleep_clk>;
>>> 			timeout-sec = <8>;
>>> 			cpu = <&cpu1>;
>>> 		};
>>>
>>> 		cpu1_wdt1: watchdog at 209a060 {
>>> 			compatible = "qcom,kpss-wdt";
>>> 			reg = <0x209a060 0x40>;
>>> 			interrupts = <1 5 0x301>,
>>> 			clocks = <&sleep_clk>;
>>> 			timeout-sec = <15>;
>>> 			cpu = <&cpu1>;
>>> 		};
>>> 	};
>>>
>>>
>> I'm thinking:
>>
>>                  timer at 200a000 {
>>                          compatible = "qcom,kpss-timer", "qcom,msm-timer";
>>                          interrupts = <1 1 0x301>,
>>                                       <1 2 0x301>,
>>                                       <1 3 0x301>,
>>                                       <1 4 0x301>,
>>                                       <1 5 0x301>;
>>                          reg = <0x0200a000 0x100>;
>>                          clock-frequency = <27000000>,
>>                                            <32768>;
>>                          clocks = <&cxo>, <&sleep_clk>;
>>                          clock-names = "ref", "sleep";
>>                          cpu-offset = <0x80000>;
>>                  };
> Where'd the default timeout configuration go?  Or, should we have one
> timeout-sec property and not allow setting the default timeouts per WDT
> instance?  Or no configurable timeout at all?

Ah sorry. How about a timeout-sec-0, timeout-sec-1 property that is 
per-cpu and maps to the first and second watchdog timer? Something like:

timeout-sec-wdt0 = <10 8>;
timeout-sec-wdt1 = <20 15>;

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation