[PATCH 0/3] Pinctrl driver for Amlogic Meson SoCs

[Beniamino Galvani]

Hi,

this series introduces a driver for Amlogic Meson pinctrl and GPIOs,
adding the basic infrastructure for all the SoCs of the Meson family
and configuration data specific for the Meson8.

The last patch depends on a previous series that adds meson8 device
tree files and can be found here:

http://lwn.net/Articles/615033/

I tested the pinmux and GPIO functionalities on a Tronsmart Vega S89e
TV box and everything seems to work, however I'm not so familiar with
the pinctrl subsystem and thus any feedback is very welcome.

Beniamino Galvani (3):
  pinctrl: add driver for Amlogic Meson SoCs
  pinctrl: meson: add device tree bindings documentation
  ARM: dts: meson8: add pinctrl and gpio nodes

 .../devicetree/bindings/pinctrl/meson,pinctrl.txt  |  80 ++
 arch/arm/boot/dts/meson8-vega-s89e.dts             |  16 +-
 arch/arm/boot/dts/meson8.dtsi                      |  35 +
 arch/arm/mach-meson/Kconfig                        |   3 +
 drivers/pinctrl/Kconfig                            |   8 +
 drivers/pinctrl/Makefile                           |   1 +
 drivers/pinctrl/meson/Makefile                     |   2 +
 drivers/pinctrl/meson/pinctrl-meson.c              | 823 +++++++++++++++++++++
 drivers/pinctrl/meson/pinctrl-meson.h              | 217 ++++++
 drivers/pinctrl/meson/pinctrl-meson8.c             | 374 ++++++++++
 include/dt-bindings/gpio/meson8-gpio.h             | 155 ++++
 11 files changed, 1713 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
 create mode 100644 drivers/pinctrl/meson/Makefile
 create mode 100644 drivers/pinctrl/meson/pinctrl-meson.c
 create mode 100644 drivers/pinctrl/meson/pinctrl-meson.h
 create mode 100644 drivers/pinctrl/meson/pinctrl-meson8.c
 create mode 100644 include/dt-bindings/gpio/meson8-gpio.h

-- 
1.9.1