[PATCH 23/44] power/reset: qnap-poweroff: Register with kernel poweroff handler
Guenter Roeck
linux at roeck-us.net
Mon Oct 6 22:28:25 PDT 2014
Register with kernel poweroff handler instead of setting pm_power_off
directly. Register with default priority value of 128 to reflect that
the original code generates an error if another poweroff handler has
already been registered when the driver is loaded.
Cc: Sebastian Reichel <sre at kernel.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
Cc: David Woodhouse <dwmw2 at infradead.org>
Signed-off-by: Guenter Roeck <linux at roeck-us.net>
---
drivers/power/reset/qnap-poweroff.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c
index a75db7f..c474980 100644
--- a/drivers/power/reset/qnap-poweroff.c
+++ b/drivers/power/reset/qnap-poweroff.c
@@ -16,7 +16,9 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/notifier.h>
#include <linux/platform_device.h>
+#include <linux/pm.h>
#include <linux/serial_reg.h>
#include <linux/kallsyms.h>
#include <linux/of.h>
@@ -55,7 +57,8 @@ static void __iomem *base;
static unsigned long tclk;
static const struct power_off_cfg *cfg;
-static void qnap_power_off(void)
+static int qnap_power_off(struct notifier_block *this, unsigned long unused1,
+ void *unused2)
{
const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));
@@ -72,14 +75,20 @@ static void qnap_power_off(void)
/* send the power-off command to PIC */
writel(cfg->cmd, UART1_REG(TX));
+
+ return NOTIFY_DONE;
}
+static struct notifier_block qnap_poweroff_nb = {
+ .notifier_call = qnap_power_off,
+ .priority = 128,
+};
+
static int qnap_power_off_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct resource *res;
struct clk *clk;
- char symname[KSYM_NAME_LEN];
const struct of_device_id *match =
of_match_node(qnap_power_off_of_match_table, np);
@@ -106,22 +115,13 @@ static int qnap_power_off_probe(struct platform_device *pdev)
tclk = clk_get_rate(clk);
- /* Check that nothing else has already setup a handler */
- if (pm_power_off) {
- lookup_symbol_name((ulong)pm_power_off, symname);
- dev_err(&pdev->dev,
- "pm_power_off already claimed %p %s",
- pm_power_off, symname);
- return -EBUSY;
- }
- pm_power_off = qnap_power_off;
-
- return 0;
+ return register_poweroff_handler(&qnap_poweroff_nb);
}
static int qnap_power_off_remove(struct platform_device *pdev)
{
- pm_power_off = NULL;
+ unregister_poweroff_handler(&qnap_poweroff_nb);
+
return 0;
}
--
1.9.1
More information about the linux-arm-kernel
mailing list