[PATCH 8/9] mtd: nand: stm_nand_bch: add support for ST's BCH NAND controller

[Brian Norris]

On Wed, Aug 27, 2014 at 01:42:23PM +0100, Lee Jones wrote:
> Reviewed-By: Pekon Gupta <pekon at pek-sem.com>
> Signed-off-by: Lee Jones <lee.jones at linaro.org>
> ---
>  drivers/mtd/nand/Kconfig        |    7 +
>  drivers/mtd/nand/Makefile       |    1 +
>  drivers/mtd/nand/stm_nand_bch.c | 1616 +++++++++++++++++++++++++++++++++++++++
>  drivers/mtd/nand/stm_nand_dt.c  |  110 +++
>  drivers/mtd/nand/stm_nand_dt.h  |   24 +
>  include/linux/mtd/stm_nand.h    |  147 ++++
>  6 files changed, 1905 insertions(+)
>  create mode 100644 drivers/mtd/nand/stm_nand_bch.c
>  create mode 100644 drivers/mtd/nand/stm_nand_dt.c
>  create mode 100644 drivers/mtd/nand/stm_nand_dt.h
>  create mode 100644 include/linux/mtd/stm_nand.h

One more thing: you never answered my question from [1]: 

Does your driver pass the MTD tests? (drivers/mtd/tests/)

Brian

[1] http://lists.infradead.org/pipermail/linux-mtd/2014-August/055084.html