[PATCH] ARM: imx: clk-vf610: define PLL's clock tree
Stefan Agner
stefan at agner.ch
Fri Oct 3 06:31:05 PDT 2014
So far, the required PLL's (PLL1/PLL2/PLL5) have been initialized
by boot loader and the kernel code defined fixed rates according
to those default configurations. Beginning with the USB PLL7 the
code started to initialize the PLL's itself (using imx_clk_pllv3).
However, since commit dc4805c2e78ba5a22ea1632f3e3e4ee601a1743b
(ARM: imx: remove ENABLE and BYPASS bits from clk-pllv3 driver)
imx_clk_pllv3 no longer takes care of the ENABLE and BYPASS bits,
hence the USB PLL were not configured correctly anymore.
This patch not only fixes those USB PLL's, but also makes use of
the imx_clk_pllv3 for all PLL's and alignes the code with the PLL
support of the i.MX6 series.
---
Shawn, if possible, it would be great if this makes it into 3.18.
Right now, because of the clk-pllv3 change, the newly added USB
support is broken...
I could have created a patch which only fixes the USB PLL7, but
then we touch the header file twice and its getting a mess in
there. I prefer to have it fixed once for all PLL's. I hope this
makes it into 3.18 nonetheless. If not, I'm also fine if this
makes it into next.
arch/arm/mach-imx/clk-vf610.c | 134 ++++++++++++++++++++++----------
include/dt-bindings/clock/vf610-clock.h | 39 ++++++++--
2 files changed, 123 insertions(+), 50 deletions(-)
diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c
index a178184..4096372 100644
--- a/arch/arm/mach-imx/clk-vf610.c
+++ b/arch/arm/mach-imx/clk-vf610.c
@@ -58,8 +58,14 @@
#define PFD_PLL1_BASE (anatop_base + 0x2b0)
#define PFD_PLL2_BASE (anatop_base + 0x100)
#define PFD_PLL3_BASE (anatop_base + 0xf0)
+#define PLL1_CTRL (anatop_base + 0x270)
+#define PLL2_CTRL (anatop_base + 0x30)
#define PLL3_CTRL (anatop_base + 0x10)
+#define PLL4_CTRL (anatop_base + 0x70)
+#define PLL5_CTRL (anatop_base + 0xe0)
+#define PLL6_CTRL (anatop_base + 0xa0)
#define PLL7_CTRL (anatop_base + 0x20)
+#define ANA_MISC1 (anatop_base + 0x160)
static void __iomem *anatop_base;
static void __iomem *ccm_base;
@@ -67,25 +73,34 @@ static void __iomem *ccm_base;
/* sources for multiplexer clocks, this is used multiple times */
static const char *fast_sels[] = { "firc", "fxosc", };
static const char *slow_sels[] = { "sirc_32k", "sxosc", };
-static const char *pll1_sels[] = { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
-static const char *pll2_sels[] = { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
-static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", };
+static const char *pll1_sels[] = { "pll1_sys", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
+static const char *pll2_sels[] = { "pll2_bus", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
+static const char *pll_bypass_src_sels[] = { "fast_clk_sel", "lvds1_in", };
+static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
+static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
+static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
+static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
+static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
+static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
+static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
+static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_bus", "pll1_pfd_sel", "pll3_usb_otg", };
static const char *ddr_sels[] = { "pll2_pfd2", "sys_sel", };
static const char *rmii_sels[] = { "enet_ext", "audio_ext", "enet_50m", "enet_25m", };
static const char *enet_ts_sels[] = { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", };
-static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
-static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
+static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", };
+static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", };
static const char *nfc_sels[] = { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", };
-static const char *qspi_sels[] = { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
-static const char *esdhc_sels[] = { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
-static const char *dcu_sels[] = { "pll1_pfd2", "pll3_main", };
+static const char *qspi_sels[] = { "pll3_usb_otg", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
+static const char *esdhc_sels[] = { "pll3_usb_otg", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
+static const char *dcu_sels[] = { "pll1_pfd2", "pll3_usb_otg", };
static const char *gpu_sels[] = { "pll2_pfd2", "pll3_pfd2", };
-static const char *vadc_sels[] = { "pll6_main_div", "pll3_main_div", "pll3_main", };
+static const char *vadc_sels[] = { "pll6_video_div", "pll3_usb_otg_div", "pll3_usb_otg", };
/* FTM counter clock source, not module clock */
static const char *ftm_ext_sels[] = {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", };
static const char *ftm_fix_sels[] = { "sxosc", "ipg_bus", };
-static struct clk_div_table pll4_main_div_table[] = {
+
+static struct clk_div_table pll4_audio_div_table[] = {
{ .val = 0, .div = 1 },
{ .val = 1, .div = 2 },
{ .val = 2, .div = 6 },
@@ -120,6 +135,9 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_AUDIO_EXT] = imx_obtain_fixed_clock("audio_ext", 0);
clk[VF610_CLK_ENET_EXT] = imx_obtain_fixed_clock("enet_ext", 0);
+ /* Clock source from external clock via LVDs PAD */
+ clk[VF610_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
+
clk[VF610_CLK_FXOSC_HALF] = imx_clk_fixed_factor("fxosc_half", "fxosc", 1, 2);
np = of_find_compatible_node(NULL, NULL, "fsl,vf610-anatop");
@@ -133,31 +151,63 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_SLOW_CLK_SEL] = imx_clk_mux("slow_clk_sel", CCM_CCSR, 4, 1, slow_sels, ARRAY_SIZE(slow_sels));
clk[VF610_CLK_FASK_CLK_SEL] = imx_clk_mux("fast_clk_sel", CCM_CCSR, 5, 1, fast_sels, ARRAY_SIZE(fast_sels));
- clk[VF610_CLK_PLL1_MAIN] = imx_clk_fixed_factor("pll1_main", "fast_clk_sel", 22, 1);
- clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_main", PFD_PLL1_BASE, 0);
- clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_main", PFD_PLL1_BASE, 1);
- clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_main", PFD_PLL1_BASE, 2);
- clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_main", PFD_PLL1_BASE, 3);
-
- clk[VF610_CLK_PLL2_MAIN] = imx_clk_fixed_factor("pll2_main", "fast_clk_sel", 22, 1);
- clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_main", PFD_PLL2_BASE, 0);
- clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_main", PFD_PLL2_BASE, 1);
- clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_main", PFD_PLL2_BASE, 2);
- clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_main", PFD_PLL2_BASE, 3);
-
- clk[VF610_CLK_PLL3_MAIN] = imx_clk_fixed_factor("pll3_main", "fast_clk_sel", 20, 1);
- clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_main", PFD_PLL3_BASE, 0);
- clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_main", PFD_PLL3_BASE, 1);
- clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_main", PFD_PLL3_BASE, 2);
- clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_main", PFD_PLL3_BASE, 3);
-
- clk[VF610_CLK_PLL4_MAIN] = imx_clk_fixed_factor("pll4_main", "fast_clk_sel", 25, 1);
- /* Enet pll: fixed 50Mhz */
- clk[VF610_CLK_PLL5_MAIN] = imx_clk_fixed_factor("pll5_main", "fast_clk_sel", 125, 6);
- /* pll6: default 960Mhz */
- clk[VF610_CLK_PLL6_MAIN] = imx_clk_fixed_factor("pll6_main", "fast_clk_sel", 40, 1);
- /* pll7: USB1 PLL at 480MHz */
- clk[VF610_CLK_PLL7_MAIN] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_main", "fast_clk_sel", PLL7_CTRL, 0x2);
+ clk[VF610_CLK_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", PLL1_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", PLL2_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", PLL3_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", PLL4_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", PLL5_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", PLL6_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", PLL7_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+
+ clk[VF610_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll1", "pll1_bypass_src", PLL1_CTRL, 0x1);
+ clk[VF610_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", PLL2_CTRL, 0x1);
+ clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", PLL3_CTRL, 0x1);
+ clk[VF610_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", PLL4_CTRL, 0x7f);
+ clk[VF610_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll5", "pll5_bypass_src", PLL5_CTRL, 0x3);
+ clk[VF610_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_AV, "pll6", "pll6_bypass_src", PLL6_CTRL, 0x7f);
+ clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", PLL7_CTRL, 0x1);
+
+ clk[VF610_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", PLL1_CTRL, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", PLL2_CTRL, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", PLL3_CTRL, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", PLL4_CTRL, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", PLL5_CTRL, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", PLL6_CTRL, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", PLL7_CTRL, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
+
+ /* Do not bypass PLLs initially */
+ clk_set_parent(clk[VF610_PLL1_BYPASS], clk[VF610_CLK_PLL1]);
+ clk_set_parent(clk[VF610_PLL2_BYPASS], clk[VF610_CLK_PLL2]);
+ clk_set_parent(clk[VF610_PLL3_BYPASS], clk[VF610_CLK_PLL3]);
+ clk_set_parent(clk[VF610_PLL4_BYPASS], clk[VF610_CLK_PLL4]);
+ clk_set_parent(clk[VF610_PLL5_BYPASS], clk[VF610_CLK_PLL5]);
+ clk_set_parent(clk[VF610_PLL6_BYPASS], clk[VF610_CLK_PLL6]);
+ clk_set_parent(clk[VF610_PLL7_BYPASS], clk[VF610_CLK_PLL7]);
+
+ clk[VF610_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", PLL1_CTRL, 13);
+ clk[VF610_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", PLL2_CTRL, 13);
+ clk[VF610_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", PLL3_CTRL, 13);
+ clk[VF610_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", PLL4_CTRL, 13);
+ clk[VF610_CLK_PLL5_ENET] = imx_clk_gate("pll5_enet", "pll5_bypass", PLL5_CTRL, 13);
+ clk[VF610_CLK_PLL6_VIDEO] = imx_clk_gate("pll6_video", "pll6_bypass", PLL6_CTRL, 13);
+ clk[VF610_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", PLL7_CTRL, 13);
+
+ clk[VF610_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", ANA_MISC1, 12, BIT(10));
+
+ clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_sys", PFD_PLL1_BASE, 0);
+ clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_sys", PFD_PLL1_BASE, 1);
+ clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_sys", PFD_PLL1_BASE, 2);
+ clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_sys", PFD_PLL1_BASE, 3);
+
+ clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_bus", PFD_PLL2_BASE, 0);
+ clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_bus", PFD_PLL2_BASE, 1);
+ clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_bus", PFD_PLL2_BASE, 2);
+ clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_bus", PFD_PLL2_BASE, 3);
+
+ clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_usb_otg", PFD_PLL3_BASE, 0);
+ clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_usb_otg", PFD_PLL3_BASE, 1);
+ clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_usb_otg", PFD_PLL3_BASE, 2);
+ clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_usb_otg", PFD_PLL3_BASE, 3);
clk[VF610_CLK_PLL1_PFD_SEL] = imx_clk_mux("pll1_pfd_sel", CCM_CCSR, 16, 3, pll1_sels, 5);
clk[VF610_CLK_PLL2_PFD_SEL] = imx_clk_mux("pll2_pfd_sel", CCM_CCSR, 19, 3, pll2_sels, 5);
@@ -167,12 +217,12 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_PLATFORM_BUS] = imx_clk_divider("platform_bus", "sys_bus", CCM_CACRR, 3, 3);
clk[VF610_CLK_IPG_BUS] = imx_clk_divider("ipg_bus", "platform_bus", CCM_CACRR, 11, 2);
- clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_main_div", "pll3_main", CCM_CACRR, 20, 1);
- clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_main_div", "pll4_main", 0, CCM_CACRR, 6, 3, 0, pll4_main_div_table, &imx_ccm_lock);
- clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_main_div", "pll6_main", CCM_CACRR, 21, 1);
+ clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_usb_otg_div", "pll3_usb_otg", CCM_CACRR, 20, 1);
+ clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_audio_div", "pll4_audio", 0, CCM_CACRR, 6, 3, 0, pll4_audio_div_table, &imx_ccm_lock);
+ clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_video_div", "pll6_video", CCM_CACRR, 21, 1);
- clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_main", PLL3_CTRL, 6);
- clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_main", PLL7_CTRL, 6);
+ clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_usb_otg", PLL3_CTRL, 6);
+ clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_usb_host", PLL7_CTRL, 6);
clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(4));
clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(4));
@@ -191,8 +241,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_QSPI1_X1_DIV] = imx_clk_divider("qspi1_x1", "qspi1_x2", CCM_CSCDR3, 11, 1);
clk[VF610_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_x1", CCM_CCGR8, CCM_CCGRx_CGn(4));
- clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_main", 1, 10);
- clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_main", 1, 20);
+ clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_enet", 1, 10);
+ clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_enet", 1, 20);
clk[VF610_CLK_ENET_SEL] = imx_clk_mux("enet_sel", CCM_CSCMR2, 4, 2, rmii_sels, 4);
clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7);
clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24);
diff --git a/include/dt-bindings/clock/vf610-clock.h b/include/dt-bindings/clock/vf610-clock.h
index d6b56b2..801c0ac 100644
--- a/include/dt-bindings/clock/vf610-clock.h
+++ b/include/dt-bindings/clock/vf610-clock.h
@@ -21,24 +21,24 @@
#define VF610_CLK_FASK_CLK_SEL 8
#define VF610_CLK_AUDIO_EXT 9
#define VF610_CLK_ENET_EXT 10
-#define VF610_CLK_PLL1_MAIN 11
+#define VF610_CLK_PLL1_SYS 11
#define VF610_CLK_PLL1_PFD1 12
#define VF610_CLK_PLL1_PFD2 13
#define VF610_CLK_PLL1_PFD3 14
#define VF610_CLK_PLL1_PFD4 15
-#define VF610_CLK_PLL2_MAIN 16
+#define VF610_CLK_PLL2_BUS 16
#define VF610_CLK_PLL2_PFD1 17
#define VF610_CLK_PLL2_PFD2 18
#define VF610_CLK_PLL2_PFD3 19
#define VF610_CLK_PLL2_PFD4 20
-#define VF610_CLK_PLL3_MAIN 21
+#define VF610_CLK_PLL3_USB_OTG 21
#define VF610_CLK_PLL3_PFD1 22
#define VF610_CLK_PLL3_PFD2 23
#define VF610_CLK_PLL3_PFD3 24
#define VF610_CLK_PLL3_PFD4 25
-#define VF610_CLK_PLL4_MAIN 26
-#define VF610_CLK_PLL5_MAIN 27
-#define VF610_CLK_PLL6_MAIN 28
+#define VF610_CLK_PLL4_AUDIO 26
+#define VF610_CLK_PLL5_ENET 27
+#define VF610_CLK_PLL6_VIDEO 28
#define VF610_CLK_PLL3_MAIN_DIV 29
#define VF610_CLK_PLL4_MAIN_DIV 30
#define VF610_CLK_PLL6_MAIN_DIV 31
@@ -166,9 +166,32 @@
#define VF610_CLK_DMAMUX3 153
#define VF610_CLK_FLEXCAN0_EN 154
#define VF610_CLK_FLEXCAN1_EN 155
-#define VF610_CLK_PLL7_MAIN 156
+#define VF610_CLK_PLL7_USB_HOST 156
#define VF610_CLK_USBPHY0 157
#define VF610_CLK_USBPHY1 158
-#define VF610_CLK_END 159
+#define VF610_CLK_LVDS1_IN 159
+#define VF610_CLK_ANACLK1 160
+#define VF610_CLK_PLL1_BYPASS_SRC 161
+#define VF610_CLK_PLL2_BYPASS_SRC 162
+#define VF610_CLK_PLL3_BYPASS_SRC 163
+#define VF610_CLK_PLL4_BYPASS_SRC 164
+#define VF610_CLK_PLL5_BYPASS_SRC 165
+#define VF610_CLK_PLL6_BYPASS_SRC 166
+#define VF610_CLK_PLL7_BYPASS_SRC 167
+#define VF610_CLK_PLL1 168
+#define VF610_CLK_PLL2 169
+#define VF610_CLK_PLL3 170
+#define VF610_CLK_PLL4 171
+#define VF610_CLK_PLL5 172
+#define VF610_CLK_PLL6 173
+#define VF610_CLK_PLL7 174
+#define VF610_PLL1_BYPASS 175
+#define VF610_PLL2_BYPASS 176
+#define VF610_PLL3_BYPASS 177
+#define VF610_PLL4_BYPASS 178
+#define VF610_PLL5_BYPASS 179
+#define VF610_PLL6_BYPASS 180
+#define VF610_PLL7_BYPASS 181
+#define VF610_CLK_END 182
#endif /* __DT_BINDINGS_CLOCK_VF610_H */
--
2.1.2
More information about the linux-arm-kernel
mailing list