[PATCH 00/26] ARM: OMAP2+: PRCM cleanups for 3.18 merge window
Felipe Balbi
balbi at ti.com
Thu Oct 2 13:17:53 PDT 2014
On Thu, Oct 02, 2014 at 12:52:38PM -0700, Tony Lindgren wrote:
> * Tony Lindgren <tony at atomide.com> [141002 09:36]:
> > * Tero Kristo <t-kristo at ti.com> [140924 02:04]:
> > > On 09/19/2014 08:27 PM, Paul Walmsley wrote:
> > > >On Fri, 19 Sep 2014, Paul Walmsley wrote:
> > > >
> > > >>However, I saw the following crash at boot on 37xxevm during one of
> > > >>the boot test. Ran thirty more boot tests afterwards on that board
> > > >>and it did not recur. It seems unlikely that the problem is related
> > > >>to this series, but looks like we may have some intermittent boot
> > > >>failure or race on 37xx :-(
> > > >
> > > >...
> > > >
> > > >>[ 4.892211] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa318034
> > > >>[ 4.900299] Internal error: : 1028 [#1] SMP ARM
> > > >>[ 4.905090] Modules linked in:
> > > >>[ 4.908325] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.17.0-rc5-12866-g0164b2d #1
> > > >>[ 4.916320] task: c0835db0 ti: c082a000 task.ti: c082a000
> > > >>[ 4.922027] PC is at omap2_gp_timer_set_next_event+0x24/0x78
> > > >>[ 4.928009] LR is at clockevents_program_event+0xc0/0x148
> > > >>[ 4.933715] pc : [<c002622c>] lr : [<c00a2800>] psr: 00000193
> > > >>[ 4.933715] sp : c082bed8 ip : 00000000 fp : 00000000
> > > >>[ 4.945800] r10: 00000000 r9 : 24101100 r8 : c0839080
> > > >>[ 4.951324] r7 : 00000001 r6 : 237bc339 r5 : 0000009f r4 : 3d9759e7
> > > >>[ 4.958190] r3 : fa318034 r2 : c08cb920 r1 : 00000003 r0 : fffffec1
> > > >>[ 4.965087] Flags: nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
> > > >>[ 4.972900] Control: 10c5387d Table: 80004019 DAC: 00000015
> > > >>[ 4.978942] Process swapper/0 (pid: 0, stack limit = 0xc082a248)
> > > >>[ 4.985290] Stack: (0xc082bed8 to 0xc082c000)
> > > >>[ 4.989868] bec0: 237bc339 00000001
> > > >>[ 4.998504] bee0: 00000001 24101100 00000001 cfc7d6c8 00000001 cfc7da50 cfc7d720 c00a4780
> > > >>[ 5.007141] bf00: 00000000 c00962b0 cfc7d720 c0096180 00000001 00000000 00000001 c08256c8
> > > >>[ 5.015777] bf20: c082a000 c08256c8 00000000 c00962b0 237b4c04 00000001 00000002 a0000193
> > > >>[ 5.024414] bf40: 00989680 00000000 00000000 24101100 00000001 cfc7da50 00000000 c108cc78
> > > >>[ 5.033020] bf60: 00000000 c00962b0 00000000 00000002 00000001 00000000 c108cc78 c00a56f0
> > > >>[ 5.041656] bf80: 00000000 00000002 237b4c04 00000001 c08c8ce8 c082a000 00000000 c08c8ce8
> > > >>[ 5.050292] bfa0: c08329dc c0832978 cfc7f0f8 c0072808 c0559928 c08270f0 c08caf40 c080fdc0
> > > >>[ 5.058929] bfc0: 00000000 c07c3b74 ffffffff ffffffff c07c35f0 00000000 00000000 c080fdc0
> > > >>[ 5.067535] bfe0: c08cb154 c0832968 c080fdbc c083763c 80004059 80008074 00000000 00000000
> > > >>[ 5.076171] [<c002622c>] (omap2_gp_timer_set_next_event) from [<c00a2800>] (clockevents_program_event+0xc0/0x148)
> > > >>[ 5.087005] [<c00a2800>] (clockevents_program_event) from [<c00a4780>] (tick_program_event+0x44/0x54)
> > > >>[ 5.096771] [<c00a4780>] (tick_program_event) from [<c0096180>] (__hrtimer_start_range_ns+0x3c0/0x4a0)
> > > >>[ 5.106597] [<c0096180>] (__hrtimer_start_range_ns) from [<c00962b0>] (hrtimer_start_range_ns+0x24/0x2c)
> > > >>[ 5.116577] [<c00962b0>] (hrtimer_start_range_ns) from [<c00a56f0>] (tick_nohz_idle_exit+0x140/0x1ec)
> > > >>[ 5.126342] [<c00a56f0>] (tick_nohz_idle_exit) from [<c0072808>] (cpu_startup_entry+0xf4/0x2d0)
> > > >>[ 5.135528] [<c0072808>] (cpu_startup_entry) from [<c07c3b74>] (start_kernel+0x340/0x3a8)
> > > >>[ 5.144165] [<c07c3b74>] (start_kernel) from [<80008074>] (0x80008074)
> > > >>[ 5.151031] Code: 13a0c000 0a000004 ee07cfba e592301c (e5931000)
> > > >>[ 5.157470] ---[ end trace f92de024d996d904 ]---
> > > >>[ 5.162353] Kernel panic - not syncing: Attempted to kill the idle task!
> > > >>[ 5.169433] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
> > > >
> > > >Actually it just occurred to me that if something broke
> > > >*wait_target_ready(), we'd expect to see intermittent failures like this,
> > > >and this series touches *wait_target_ready(). So it might be worth taking
> > > >a look at that with a magnifying glass to make sure that it's working.
> > >
> > > I think this is probably something else, and most likely more hideous. The
> > > clock source timers are only enabled once during a boot, and they are never
> > > idled after that. This error happens almost 5 seconds after the initial
> > > module enable...?
> >
> > I have not seen this and I've had this branch merged in for testing
> > here for about a week now. I've also merged it into linux-omap master
> > branch for merging now, let's keep it there and plan on merging it early
> > for v3.19 merge window unless some issues are found.
>
> Hmm here seems to be a link to similar issues from 2011:
>
> http://e2e.ti.com/support/arm/sitara_arm/f/791/p/113593/628790.aspx
>
> Looks like the issue can be potentially reproduced with:
>
> # cyclictest -l100000000 -m -a0 -t1 -n -p99 -i200 -h200 -q
running here on am335x and am437x. On that same post, on person
mentions he reproduced on beagle bone.
--
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141002/83b03b7d/attachment.sig>
More information about the linux-arm-kernel
mailing list