[PATCH 1/7] pinctrl: nomadik: force-convert to generic mux bindings
Linus Walleij
linus.walleij at linaro.org
Thu Oct 2 01:40:14 PDT 2014
This converts the Nomadik pin controller and all associated device
trees to use the standard, generic mux bindings for pin controllers.
There are no such device trees deployed in the wild so this is
safe to do to set a good example.
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi | 28 ++++-----
arch/arm/boot/dts/ste-href-family-pinctrl.dtsi | 80 +++++++++++++-------------
arch/arm/boot/dts/ste-hrefprev60.dtsi | 12 ++--
arch/arm/boot/dts/ste-hrefv60plus.dtsi | 4 +-
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 20 +++----
arch/arm/boot/dts/ste-snowball.dts | 12 ++--
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 16 ++++--
7 files changed, 88 insertions(+), 84 deletions(-)
diff --git a/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi b/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi
index e0799966bc25..08a7365cb929 100644
--- a/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi
@@ -16,8 +16,8 @@
uart0 {
uart0_default_mux: uart0_mux {
default_mux {
- ste,function = "u0";
- ste,pins = "u0_a_1";
+ function = "u0";
+ groups = "u0_a_1";
};
};
@@ -49,8 +49,8 @@
uart2 {
uart2_default_mode: uart2_default {
default_mux {
- ste,function = "u2";
- ste,pins = "u2txrx_a_1";
+ function = "u2";
+ groups = "u2txrx_a_1";
};
default_cfg1 {
@@ -80,8 +80,8 @@
i2c0 {
i2c0_default_mux: i2c_mux {
default_mux {
- ste,function = "i2c0";
- ste,pins = "i2c0_a_1";
+ function = "i2c0";
+ groups = "i2c0_a_1";
};
};
@@ -103,8 +103,8 @@
i2c1 {
i2c1_default_mux: i2c_mux {
default_mux {
- ste,function = "i2c1";
- ste,pins = "i2c1_b_2";
+ function = "i2c1";
+ groups = "i2c1_b_2";
};
};
@@ -126,8 +126,8 @@
i2c2 {
i2c2_default_mux: i2c_mux {
default_mux {
- ste,function = "i2c2";
- ste,pins = "i2c2_b_2";
+ function = "i2c2";
+ groups = "i2c2_b_2";
};
};
@@ -149,8 +149,8 @@
i2c4 {
i2c4_default_mux: i2c_mux {
default_mux {
- ste,function = "i2c4";
- ste,pins = "i2c4_b_2";
+ function = "i2c4";
+ groups = "i2c4_b_2";
};
};
@@ -172,8 +172,8 @@
i2c5 {
i2c5_default_mux: i2c_mux {
default_mux {
- ste,function = "i2c5";
- ste,pins = "i2c5_c_2";
+ function = "i2c5";
+ groups = "i2c5_c_2";
};
};
diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
index addfcc7c2750..61aa87138927 100644
--- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
@@ -18,8 +18,8 @@
uart0 {
uart0_default_mode: uart0_default {
default_mux {
- ste,function = "u0";
- ste,pins = "u0_a_1";
+ function = "u0";
+ groups = "u0_a_1";
};
default_cfg1 {
ste,pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
@@ -53,8 +53,8 @@
uart1 {
uart1_default_mode: uart1_default {
default_mux {
- ste,function = "u1";
- ste,pins = "u1rxtx_a_1";
+ function = "u1";
+ groups = "u1rxtx_a_1";
};
default_cfg1 {
ste,pins = "GPIO4_AH6"; /* RXD */
@@ -83,8 +83,8 @@
uart2 {
uart2_default_mode: uart2_default {
default_mux {
- ste,function = "u2";
- ste,pins = "u2rxtx_c_1";
+ function = "u2";
+ groups = "u2rxtx_c_1";
};
default_cfg1 {
ste,pins = "GPIO29_W2"; /* RXD */
@@ -114,8 +114,8 @@
i2c0 {
i2c0_default_mode: i2c_default {
default_mux {
- ste,function = "i2c0";
- ste,pins = "i2c0_a_1";
+ function = "i2c0";
+ groups = "i2c0_a_1";
};
default_cfg1 {
ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
@@ -134,8 +134,8 @@
i2c1 {
i2c1_default_mode: i2c_default {
default_mux {
- ste,function = "i2c1";
- ste,pins = "i2c1_b_2";
+ function = "i2c1";
+ groups = "i2c1_b_2";
};
default_cfg1 {
ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
@@ -154,8 +154,8 @@
i2c2 {
i2c2_default_mode: i2c_default {
default_mux {
- ste,function = "i2c2";
- ste,pins = "i2c2_b_2";
+ function = "i2c2";
+ groups = "i2c2_b_2";
};
default_cfg1 {
ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
@@ -174,8 +174,8 @@
i2c3 {
i2c3_default_mode: i2c_default {
default_mux {
- ste,function = "i2c3";
- ste,pins = "i2c3_c_2";
+ function = "i2c3";
+ groups = "i2c3_c_2";
};
default_cfg1 {
ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
@@ -198,8 +198,8 @@
i2c4 {
i2c4_default_mode: i2c_default {
default_mux {
- ste,function = "i2c4";
- ste,pins = "i2c4_b_1";
+ function = "i2c4";
+ groups = "i2c4_b_1";
};
default_cfg1 {
ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
@@ -219,8 +219,8 @@
spi2 {
spi2_default_mode: spi_default {
default_mux {
- ste,function = "spi2";
- ste,pins = "spi2_oc1_2";
+ function = "spi2";
+ groups = "spi2_oc1_2";
};
default_cfg1 {
ste,pins = "GPIO216_AG12"; /* FRM */
@@ -281,8 +281,8 @@
/* This is the external SD card slot, 4 bits wide */
sdi0_default_mode: sdi0_default {
default_mux {
- ste,function = "mc0";
- ste,pins = "mc0_a_1";
+ function = "mc0";
+ groups = "mc0_a_1";
};
default_cfg1 {
ste,pins =
@@ -339,8 +339,8 @@
/* This is the WLAN SDIO 4 bits wide */
sdi1_default_mode: sdi1_default {
default_mux {
- ste,function = "mc1";
- ste,pins = "mc1_a_1";
+ function = "mc1";
+ groups = "mc1_a_1";
};
default_cfg1 {
ste,pins = "GPIO208_AH16"; /* CLK */
@@ -383,8 +383,8 @@
/* This is the eMMC 8 bits wide, usually PoP eMMC */
sdi2_default_mode: sdi2_default {
default_mux {
- ste,function = "mc2";
- ste,pins = "mc2_a_1";
+ function = "mc2";
+ groups = "mc2_a_1";
};
default_cfg1 {
ste,pins = "GPIO128_A5"; /* CLK */
@@ -439,8 +439,8 @@
/* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
sdi4_default_mode: sdi4_default {
default_mux {
- ste,function = "mc4";
- ste,pins = "mc4_a_1";
+ function = "mc4";
+ groups = "mc4_a_1";
};
default_cfg1 {
ste,pins = "GPIO203_AE23"; /* CLK */
@@ -494,8 +494,8 @@
msp0 {
msp0_default_mode: msp0_default {
default_msp0_mux {
- ste,function = "msp0";
- ste,pins = "msp0txrx_a_1", "msp0tfstck_a_1";
+ function = "msp0";
+ groups = "msp0txrx_a_1", "msp0tfstck_a_1";
};
default_msp0_cfg {
ste,pins =
@@ -511,8 +511,8 @@
msp1 {
msp1_default_mode: msp1_default {
default_mux {
- ste,function = "msp1";
- ste,pins = "msp1txrx_a_1", "msp1_a_1";
+ function = "msp1";
+ groups = "msp1txrx_a_1", "msp1_a_1";
};
default_cfg1 {
ste,pins = "GPIO33_AF2";
@@ -533,8 +533,8 @@
msp2_default_mode: msp2_default {
/* MSP2 usually used for HDMI audio */
default_mux {
- ste,function = "msp2";
- ste,pins = "msp2_a_1";
+ function = "msp2";
+ groups = "msp2_a_1";
};
default_cfg1 {
ste,pins =
@@ -554,8 +554,8 @@
musb {
musb_default_mode: musb_default {
default_mux {
- ste,function = "usb";
- ste,pins = "usb_a_1";
+ function = "usb";
+ groups = "usb_a_1";
};
default_cfg1 {
ste,pins =
@@ -609,8 +609,8 @@
lcd_default_mode: lcd_default {
default_mux {
/* Mux in VSI0 and all the data lines */
- ste,function = "lcd";
- ste,pins =
+ function = "lcd";
+ groups =
"lcdvsi0_a_1", /* VSI0 for LCD */
"lcd_d0_d7_a_1", /* Data lines */
"lcd_d8_d11_a_1", /* TV-out */
@@ -636,8 +636,8 @@
/* SKE keys on position 2 in an 8x8 matrix */
ske_kpa2_default_mode: ske_kpa2_default {
default_mux {
- ste,function = "kp";
- ste,pins = "kp_a_2";
+ function = "kp";
+ groups = "kp_a_2";
};
default_cfg1 {
ste,pins =
@@ -696,8 +696,8 @@
*/
ske_kpaoc1_default_mode: ske_kpaoc1_default {
default_mux {
- ste,function = "kp";
- ste,pins = "kp_a_1", "kp_oc1_1";
+ function = "kp";
+ groups = "kp_a_1", "kp_oc1_1";
};
default_cfg1 {
ste,pins =
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index abc762e24fcb..5d8b7f8ced1b 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -79,8 +79,8 @@
ssp0 {
ssp0_hrefprev60_mode: ssp0_hrefprev60_default {
hrefprev60_mux {
- ste,function = "ssp0";
- ste,pins = "ssp0_a_1";
+ function = "ssp0";
+ groups = "ssp0_a_1";
};
hrefprev60_cfg1 {
ste,pins = "GPIO145_C13"; /* RXD */
@@ -93,8 +93,8 @@
/* This additional pin needed on early MOP500 and HREFs previous to v60 */
sdi0_default_mode: sdi0_default {
hrefprev60_mux {
- ste,function = "mc0";
- ste,pins = "mc0dat31dir_a_1";
+ function = "mc0";
+ groups = "mc0dat31dir_a_1";
};
hrefprev60_cfg1 {
ste,pins = "GPIO21_AB3"; /* DAT31DIR */
@@ -114,8 +114,8 @@
ipgpio {
ipgpio_hrefprev60_mode: ipgpio_hrefprev60 {
hrefprev60_mux {
- ste,function = "ipgpio";
- ste,pins = "ipgpio0_c_1", "ipgpio1_c_1";
+ function = "ipgpio";
+ groups = "ipgpio0_c_1", "ipgpio1_c_1";
};
hrefprev60_cfg1 {
ste,pins = "GPIO6_AF6", "GPIO7_AG5";
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index bcc1f0c37f49..2b4104ef07de 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -64,8 +64,8 @@
*/
ipgpio_hrefv60_mode: ipgpio_hrefv60 {
hrefv60_mux {
- ste,function = "ipgpio";
- ste,pins = "ipgpio0_c_1", "ipgpio1_c_1", "ipgpio4_c_1";
+ function = "ipgpio";
+ groups = "ipgpio0_c_1", "ipgpio1_c_1", "ipgpio4_c_1";
};
hrefv60_cfg1 {
ste,pins = "GPIO6_AF6", "GPIO7_AG5";
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index dbcf521b017f..7cedb5aba9a9 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -100,24 +100,24 @@
uart0 {
uart0_default_mux: uart0_mux {
u0_default_mux {
- ste,function = "u0";
- ste,pins = "u0_a_1";
+ function = "u0";
+ groups = "u0_a_1";
};
};
};
uart1 {
uart1_default_mux: uart1_mux {
u1_default_mux {
- ste,function = "u1";
- ste,pins = "u1_a_1";
+ function = "u1";
+ groups = "u1_a_1";
};
};
};
mmcsd {
mmcsd_default_mux: mmcsd_mux {
mmcsd_default_mux {
- ste,function = "mmcsd";
- ste,pins = "mmcsd_a_1";
+ function = "mmcsd";
+ groups = "mmcsd_a_1";
};
};
mmcsd_default_mode: mmcsd_default {
@@ -144,8 +144,8 @@
i2c0 {
i2c0_default_mux: i2c0_mux {
i2c0_default_mux {
- ste,function = "i2c0";
- ste,pins = "i2c0_a_1";
+ function = "i2c0";
+ groups = "i2c0_a_1";
};
};
i2c0_default_mode: i2c0_default {
@@ -158,8 +158,8 @@
i2c1 {
i2c1_default_mux: i2c1_mux {
i2c1_default_mux {
- ste,function = "i2c1";
- ste,pins = "i2c1_a_1";
+ function = "i2c1";
+ groups = "i2c1_a_1";
};
};
i2c1_default_mode: i2c1_default {
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 4a2000c620ad..e628258c6b1a 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -405,8 +405,8 @@
*/
eth_snowball_mode: eth_snowball {
snowball_mux {
- ste,function = "sm";
- ste,pins = "sm_b_1";
+ function = "sm";
+ groups = "sm_b_1";
};
/* LAN IRQ pin */
snowball_cfg1 {
@@ -424,8 +424,8 @@
sdi0 {
sdi0_default_mode: sdi0_default {
snowball_mux {
- ste,function = "mc0";
- ste,pins = "mc0dat31dir_a_1";
+ function = "mc0";
+ groups = "mc0dat31dir_a_1";
};
snowball_cfg1 {
ste,pins = "GPIO21_AB3"; /* DAT31DIR */
@@ -437,8 +437,8 @@
ssp0 {
ssp0_snowball_mode: ssp0_snowball_default {
snowball_mux {
- ste,function = "ssp0";
- ste,pins = "ssp0_a_1";
+ function = "ssp0";
+ groups = "ssp0_a_1";
};
snowball_cfg1 {
ste,pins = "GPIO144_B13"; /* FRM */
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index 3c29d9187146..f7f29bd6c0ce 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -1520,12 +1520,13 @@ static int nmk_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
unsigned long configs = 0;
bool has_config = 0;
struct property *prop;
- const char *group, *gpio_name;
struct device_node *np_config;
- ret = of_property_read_string(np, "ste,function", &function);
+ ret = of_property_read_string(np, "function", &function);
if (ret >= 0) {
- ret = of_property_count_strings(np, "ste,pins");
+ const char *group;
+
+ ret = of_property_count_strings(np, "groups");
if (ret < 0)
goto exit;
@@ -1535,7 +1536,7 @@ static int nmk_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
if (ret < 0)
goto exit;
- of_property_for_each_string(np, "ste,pins", prop, group) {
+ of_property_for_each_string(np, "groups", prop, group) {
ret = nmk_dt_add_map_mux(map, reserved_maps, num_maps,
group, function);
if (ret < 0)
@@ -1548,6 +1549,9 @@ static int nmk_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
if (np_config)
has_config |= nmk_pinctrl_dt_get_config(np_config, &configs);
if (has_config) {
+ const char *gpio_name;
+ const char *pin;
+
ret = of_property_count_strings(np, "ste,pins");
if (ret < 0)
goto exit;
@@ -1557,8 +1561,8 @@ static int nmk_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
if (ret < 0)
goto exit;
- of_property_for_each_string(np, "ste,pins", prop, group) {
- gpio_name = nmk_find_pin_name(pctldev, group);
+ of_property_for_each_string(np, "ste,pins", prop, pin) {
+ gpio_name = nmk_find_pin_name(pctldev, pin);
ret = nmk_dt_add_map_configs(map, reserved_maps,
num_maps,
--
1.9.3
More information about the linux-arm-kernel
mailing list