[PATCH v10 0/4] APM X-Gene PCIe host controller
Bjorn Helgaas
bhelgaas at google.com
Wed Oct 1 12:14:03 PDT 2014
On Fri, Sep 26, 2014 at 02:08:23PM -0700, Tanmay Inamdar wrote:
> This patch adds support for AppliedMicro X-Gene PCIe host controller. The
> driver is tested on X-Gene platform with different gen1/2/3 PCIe endpoint
> cards.
>
> X-Gene PCIe controller driver has depedency on the pcie arm64 arch support.
> Liviu Dudau from ARM has sent a patch set for pcie arm64 arch support and
> support for creating generic pcie bridge from device tree. Liviu's patches
> are available here
> https://lkml.org/lkml/2014/9/23/852
>
> If someone wishes to test PCIe on X-Gene with this patch set, above mentioned
> patches from Liviu must be applied before the patches in this patch set. Also
> please use latest xgene u-boot firmware.
I applied these on pci/host-xgene (based on pci/host-generic). I hope to
merge these for v3.18. It'd be nice to have a device tree person like Arnd
or Rob take a look at the arch/arm64/boot/dts/ bits.
> changes since V9:
> 1. Remove 'xgene_pcie_fixup_bridge' and hide the bridge BAR0 and BAR1 by
> faking bridge's config space read and write to BAR0 and BAR1.
> 2. Remove whitespace and fit in one line.
> 3. Follow usual block comment.
> 4. user '%pR' for printing out resource info
> 5. Add device and vendor ID programming to make driver operable with older
> firmware.
>
> changes since V8:
> 1. Add 'dma-coherent' attribute in device node.
>
> changes since V7:
> 1. Fix outbound region mapping for IO region. Thanks Liviu for the catch.
>
> changes since V6:
> 1. Port driver to changed interface as per Liviu's v10 series.
>
> changes since V5:
> 1. Port driver to changed interface of 'of_create_pci_host_bridge'
> 2. Fix the prefetch bit setting
> 3. Removed bunch of register programming which is already done by firmware
>
> changes since V4:
> 1. fix section mismatch warnings
> 2. fix the patch description
> 3. fix indentation
> 4. update read/write cfg functions by passing both addr and offset.
> 5. use 'time_before' for timeout.
> 6. remove unnecessary 'IS_ERR_OR_NULL'. Keep 'IS_ERR' for 'clk_get'
> 7. remove BUG_ON for pci_ioremap_io.
>
> changes since V3:
> 1. remove 'struct hw_pci' and supporting ops in hw_pci
> 2. add code to create the host bridge from dts
> 3. add code to scan the the host bridge
> 4. modify outbound windows setup function to get resource information from
> 'bridge->windows'
> 5. add compatible string in pcie dts node with current X-Gene SOC name.
>
> changes since V2:
> 1. redefined each PCI port in different PCI domain correctly.
> 2. removed setup_lane and setup_link functions from driver.
> 3. removed scan_bus wrapper and set_primary_bus hack.
> 4. added pci_ioremap_io for io resources.
>
> changes since V1:
> 1. added PCI domain support
> 2. reading cpu and pci addresses from device tree to configure regions.
> 3. got rid of unnecessary wrappers for readl and writel.
> 4. got rid of endpoint configuration code.
> 5. added 'dma-ranges' property support to read inbound region configuration.
> 6. renamed host driver file to 'pci-xgene.c' from 'pcie-xgene.c'
> 7. dropped 'clock-names' property from bindings
> 8. added comments whereever requested.
>
> Tanmay Inamdar (4):
> pci:host: APM X-Gene PCIe host controller driver
> arm64: dts: APM X-Gene PCIe device tree nodes
> dt-bindings: pci: xgene pcie device tree bindings
> MAINTAINERS: entry for APM X-Gene PCIe host driver
>
> .../devicetree/bindings/pci/xgene-pci.txt | 57 ++
> MAINTAINERS | 8 +
> arch/arm64/boot/dts/apm-mustang.dts | 8 +
> arch/arm64/boot/dts/apm-storm.dtsi | 165 ++++++
> drivers/pci/host/Kconfig | 10 +
> drivers/pci/host/Makefile | 1 +
> drivers/pci/host/pci-xgene.c | 659 +++++++++++++++++++++
> 7 files changed, 908 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pci/xgene-pci.txt
> create mode 100644 drivers/pci/host/pci-xgene.c
>
> --
> 1.9.1
>
More information about the linux-arm-kernel
mailing list