[GIT PULL 3/3] 3rd Round of Exynos-PM-2 Updates for v3.18

[Bartlomiej Zolnierkiewicz]

Hi,

On Wednesday, October 01, 2014 06:01:29 PM Arnd Bergmann wrote:
> On Thursday 25 September 2014, Kukjin Kim wrote:
> > Exynos 2nd PM related updates for v3.18
> > 
> > - Firmware supporting suspend and resume to excute of low
> >    level operations to enter and leave power mode for exynos
> >    : introduce suspend() and resume() firmware operations
> > 
> > - Fix AFTR mode on boards with secure firmware enabled and
> >    allows exynos cpuidle driver usage on exynos4x12 SoCs
> > 
> > - Fix build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=y
> > 
> > - SWRESET is needed to boot secondary CPU on exynos3250
> > 
> 
> I needed another fixup to make this build, but I'm not sure about
> whether this is the right solution.

Could you please share the build errors and the used config?

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

> I decided not to pull this one, please test again with and without
> my patch for the case that ARM_CPU_SUSPEND is disabled.
> 
> 	Arnd
> 
> diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
> index 64324bf5edb4..aaab67d84bf6 100644
> --- a/arch/arm/mach-exynos/Makefile
> +++ b/arch/arm/mach-exynos/Makefile
> @@ -14,9 +14,9 @@ obj-				:=
>  
>  # Core
>  
> -obj-$(CONFIG_ARCH_EXYNOS)	+= exynos.o pmu.o exynos-smc.o firmware.o sleep.o
> +obj-$(CONFIG_ARCH_EXYNOS)	+= exynos.o pmu.o exynos-smc.o firmware.o
>  
> -obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o
> +obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o
>  obj-$(CONFIG_PM_SLEEP)		+= suspend.o
>  obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
>  
> diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
> index 2c5bc6bfcbdf..b7ff8f25bf4a 100644
> --- a/arch/arm/mach-exynos/firmware.c
> +++ b/arch/arm/mach-exynos/firmware.c
> @@ -129,11 +129,11 @@ static int exynos_resume(void)
>  }
>  
>  static const struct firmware_ops exynos_firmware_ops = {
> -	.do_idle		= exynos_do_idle,
> +	.do_idle		= IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_do_idle : NULL,
>  	.set_cpu_boot_addr	= exynos_set_cpu_boot_addr,
>  	.cpu_boot		= exynos_cpu_boot,
> -	.suspend		= exynos_suspend,
> -	.resume			= exynos_resume,
> +	.suspend		= IS_ENABLED(CONFIG_PM_SLEEP) ? exynos_suspend : NULL,
> +	.resume			= IS_ENABLED(CONFIG_PM_SLEEP) ? exynos_resume : NULL,
>  };
>  
>  void __init exynos_firmware_init(void)