[PATCH v3 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards

[Dmitry Lavnikevich]

On 01/10/14 15:11, Fabio Estevam wrote:
> On Tue, Sep 16, 2014 at 5:08 AM, Dmitry Lavnikevich
> <d.lavnikevich at sam-solutions.com> wrote:
>
>> +       regulators {
>> +               sound_1v8: regulator at 2 {
>
> We usually start counting from @0.
>
...
 >> +               };
 >> +
 >> +               sound_3v3: regulator at 3 {
 >
 > ,so this one should be @1.

@0 and @1 are used for "usb_otg_vbus" and "usb_h1_vbus" regulators in 
dts for phyFLEX module (imx6qdl-phytec-pfla02.dtsi) which gets included 
before base board dts (imx6qdl-phytec-pbab01.dtsi)

>> +                       compatible = "regulator-fixed";
>> +                       reg = <2>;
>> +                       regulator-name = "i2s-audio-1v8";
>> +                       regulator-min-microvolt = <1800000>;
>> +                       regulator-max-microvolt = <1800000>;
>> +                       regulator-always-on;
>
> No need to have this 'regulator-always-on'
>
...
>> +                       compatible = "regulator-fixed";
>> +                       reg = <3>;
>> +                       regulator-name = "i2s-audio-3v3";
>> +                       regulator-min-microvolt = <3300000>;
>> +                       regulator-max-microvolt = <3300000>;
>> +                       regulator-always-on;
>
> No need to have this 'regulator-always-on'
>

why is there no need for 'regulator-alweys-on'? I see it in
similar fixed regulator descriptions in imx6qdl-sabrelite.dtsi,
imx6qdl-wandboard.dtsi, imx6qdl-nitrogen6x.dtsi and many other
boards.

>> +&ssi2 {
>> +       fsl,mode = "i2s-slave";
>
> Please remove this 'fsl,mode' property. It is ignored by the fsl_ssi driver.

yes, thanks. It is present in Documentation but now I see that it
was actually removed not that long ago. I will remove this
property with next patchset.