[PATCH, regression against -rc6] net/stmmac: fix one more regression from filter bins setting
Arnd Bergmann
arnd at arndb.de
Sat Nov 29 08:26:42 PST 2014
On Saturday 29 November 2014 23:44:23 陈华才 wrote:
> Hi, Arnd,
>
> Maybe this patch is better?
> http://www.spinics.net/lists/netdev/msg306413.html
Yes, that would work too. I also checked that my version works now.
I'm fine with either one, as long as a fix makes it into 3.18.
Arnd
> ------------------ Original ------------------
> From: "Arnd Bergmann"<arnd at arndb.de>;
> Date: Sat, Nov 29, 2014 08:03 PM
> To: "David Miller"<davem at davemloft.net>;
> Cc: "netdev"<netdev at vger.kernel.org>; "khilman"<khilman at kernel.org>; "Huacai Chen"<chenhc at lemote.com>; "Giuseppe Cavallaro"<peppe.cavallaro at st.com>; "olof"<olof at lixom.net>; "linux-arm-kernel"<linux-arm-kernel at lists.infradead.org>;
> Subject: [PATCH, regression against -rc6] net/stmmac: fix one more regression from filter bins setting
>
> Commit 571dcfde2371 ("stmmac: platform: fix default values of the filter
> bins setting") tries to fix a regression in the stmmac driver, but instead
> it also causes a new regression and makes all DT-based users of this
> driver fail, as found by the automated ARM boot testing:
>
> [ 0.881667] Unable to handle kernel NULL pointer dereference at virtual address 00000048
> [ 0.889784] pgd = c0204000
> [ 0.892502] [00000048] *pgd=00000000
> [ 0.896090] Internal error: Oops: 805 [#1] SMP ARM
> [ 0.900874] Modules linked in:
> [ 0.903943] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc6-00150-g8891063 #1
> [ 0.911502] task: ee06c000 ti: ee070000 task.ti: ee070000
> [ 0.916899] PC is at stmmac_pltfr_probe+0x40/0x5d0
> [ 0.921689] LR is at devm_ioremap_nocache+0x54/0x74
> [ 0.926561] pc : [<c0642df8>] lr : [<c0430508>] psr: 80000153
> [ 0.926561] sp : ee071e50 ip : 00000000 fp : 00000000
> [ 0.938020] r10: c0c14f74 r9 : ee3ca2c0 r8 : ee101c10
> [ 0.943237] r7 : f00c0000 r6 : ee101c00 r5 : ee101c10 r4 : 00000000
> [ 0.949755] r3 : 00000001 r2 : 00000040 r1 : a0000153 r0 : f00c0000
> [ 0.956274] Flags: Nzcv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel
> [ 0.963658] Control: 10c5387d Table: 4020406a DAC: 00000015
> [ 0.969395] Process swapper/0 (pid: 1, stack limit = 0xee070248)
> [ 0.975384] Stack: (0xee071e50 to 0xee072000)
> [ 0.979738] 1e40: c0d83aa0 ee101c10 c0cfc030 fffffdfb
> [ 0.987906] 1e60: 00000000 ee3ca2c0 c0c14f74 c056c6d0 c056c68c c0d83aa0 ee101c10 00000000
> [ 0.996075] 1e80: c0cfc030 c056af54 ee101c10 c0cfc030 ee101c44 c0cf15f8 c0c616a0 c056b158
> [ 1.004243] 1ea0: 00000000 c0cfc030 c056b0cc c0569514 ee01675c ee0d86b4 c0cfc030 ee3c9300
> [ 1.012412] 1ec0: 00000000 c056a77c c0ad7be0 ee071ef8 c0cfc030 c0cfc030 ee070000 c0be0ca8
> [ 1.020580] 1ee0: 00000000 c056b77c 00000000 c0c616a0 ee070000 c0be0cbc c0c616a0 c0208cb0
> [ 1.028750] 1f00: ee011900 c0d6c324 ee0b6600 c08a6748 00000000 00000000 00006a40 c034782c
> [ 1.036918] 1f20: 00000000 c0ca1aac 60000153 00000001 c0b9f598 ef7fcd9c ef7fcd99 c025ffa0
> [ 1.045087] 1f40: c0ae650c ef7fcda0 00000006 00000006 c0ca1a94 c0c50d44 00000006 c0c14f6c
> [ 1.053255] 1f60: c0d46a40 c0d46a40 000000ff c0c14f74 00000000 c0b9fda4 00000006 00000006
> [ 1.061423] 1f80: c0b9f598 9c041042 00000000 c089460c 00000000 00000000 00000000 00000000
> [ 1.069591] 1fa0: 00000000 c0894614 00000000 c020e878 00000000 00000000 00000000 00000000
> [ 1.077759] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> [ 1.085926] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 18044434 8a444414
> [ 1.094113] [<c0642df8>] (stmmac_pltfr_probe) from [<c056c6d0>] (platform_drv_probe+0x44/0xa4)
> [ 1.102719] [<c056c6d0>] (platform_drv_probe) from [<c056af54>] (driver_probe_device+0x108/0x23c)
> [ 1.111582] [<c056af54>] (driver_probe_device) from [<c056b158>] (__driver_attach+0x8c/0x90)
> [ 1.120011] [<c056b158>] (__driver_attach) from [<c0569514>] (bus_for_each_dev+0x6c/0xa0)
> [ 1.128182] [<c0569514>] (bus_for_each_dev) from [<c056a77c>] (bus_add_driver+0x148/0x1f0)
> [ 1.136438] [<c056a77c>] (bus_add_driver) from [<c056b77c>] (driver_register+0x78/0xf8)
> [ 1.144434] [<c056b77c>] (driver_register) from [<c0be0cbc>] (stmmac_init+0x14/0x3c)
> [ 1.152176] [<c0be0cbc>] (stmmac_init) from [<c0208cb0>] (do_one_initcall+0x8c/0x1c4)
> [ 1.160004] [<c0208cb0>] (do_one_initcall) from [<c0b9fda4>] (kernel_init_freeable+0x13c/0x1dc)
> [ 1.168699] [<c0b9fda4>] (kernel_init_freeable) from [<c0894614>] (kernel_init+0x8/0xe8)
> [ 1.176785] [<c0894614>] (kernel_init) from [<c020e878>] (ret_from_fork+0x14/0x3c)
> [ 1.184348] Code: 8a0000fe e5964064 e3a02040 e3a03001 (e5842048)
> [ 1.190501] ---[ end trace 724411f6ae142767 ]---
> [ 1.195158] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
>
> Where the original patch left out the non-DT probe method, the fix that
> was merged for -rc7 instead broke the DT path by dereferencing a NULL
> pointer.
>
> This patch reverts the broken fix and tries to put the initialization
> for multicast_filter_bins/unicast_filter_entries in the right place,
> which prevents non-DT users from overriding the defaults as a side
> effect, as before. Alternatively, one could change all instances of
> the platform_data definition to set the values themselves, but it's
> probably safer to do that as a follow-up.
>
> Signed-off-by: Arnd Bergmann <arnd at arndb.de>
> Fixes: 571dcfde2371 ("stmmac: platform: fix default values of the filter bins setting")
> Link: http://arm-soc.lixom.net/bootlogs/mainline/v3.18-rc6-150-g8891063/cubie2-arm-multi_v7_defconfig.html
> ---
> I've sent this off to the build bots, but it will probably take some more
> time before it's been tested on all the ARM machines and I might not be
> there to see the results, so I'm sending it out now for review. I will
> reply once I am sure the problem is fixed.
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> index 5b0da3986216..94c3cefaa2c3 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> @@ -177,6 +177,12 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
> */
> plat->maxmtu = JUMBO_LEN;
>
> + /* Set default value for multicast hash bins */
> + plat->multicast_filter_bins = HASH_TABLE_SIZE;
> +
> + /* Set default value for unicast filter entries */
> + plat->unicast_filter_entries = 1;
> +
> /*
> * Currently only the properties needed on SPEAr600
> * are provided. All other properties should be added
> @@ -264,13 +270,6 @@ static int stmmac_pltfr_probe(struct platform_device *pdev)
> return PTR_ERR(addr);
>
> plat_dat = dev_get_platdata(&pdev->dev);
> -
> - /* Set default value for multicast hash bins */
> - plat_dat->multicast_filter_bins = HASH_TABLE_SIZE;
> -
> - /* Set default value for unicast filter entries */
> - plat_dat->unicast_filter_entries = 1;
> -
> if (pdev->dev.of_node) {
> if (!plat_dat)
> plat_dat = devm_kzalloc(&pdev->dev,
> @@ -286,6 +285,12 @@ static int stmmac_pltfr_probe(struct platform_device *pdev)
> pr_err("%s: main dt probe failed", __func__);
> return ret;
> }
> + } else {
> + /* Set default value for multicast hash bins */
> + plat_dat->multicast_filter_bins = HASH_TABLE_SIZE;
> +
> + /* Set default value for unicast filter entries */
> + plat_dat->unicast_filter_entries = 1;
> }
>
> /* Custom setup (if needed) */
More information about the linux-arm-kernel
mailing list