[PATCH 3/4] clk: dts: document Mediatek MT8135 clock binding

[James Liao]

Document the device-tree binding of Mediatek MT8135 SoC, including
TOPCKGEN, PLLs, INFRA and PERI clock controller.

Signed-off-by: James Liao <jamesjj.liao at mediatek.com>
---
 .../bindings/clock/mediatek,mt8135-clock.txt       | 36 ++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/mediatek,mt8135-clock.txt

diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8135-clock.txt b/Documentation/devicetree/bindings/clock/mediatek,mt8135-clock.txt
new file mode 100644
index 0000000..e23df49
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8135-clock.txt
@@ -0,0 +1,36 @@
+Mediatek MT8135 Clock Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The Mediatek MT8135 clock controller generates and supplies clock to various
+controllers within Mediatek MT8135 SoC.
+
+Required Properties:
+
+- compatible: should be one of following:
+	- "mediatek,mt8135-topckgen" : for topckgen clock controller of MT8135.
+	- "mediatek,mt8135-apmixedsys" : for apmixed_sys (PLLs) of MT8135.
+	- "mediatek,mt8135-infracfg" : for infra_sys clock controller of MT8135.
+	- "mediatek,mt8135-pericfg" : for peri_sys clock controller of MT8135.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/mt8135-clk.h header and can be used in device tree sources.
+
+Example: I2C controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+	i2c0: i2c at 1100d000 {
+		compatible = "mediatek,mt8135-i2c", "mediatek,mt6589-i2c";
+		reg = <0 0x1100d000 0 0x70>, <0 0x11000300 0 0x80>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg PERI_I2C0_CK>, <&pericfg PERI_AP_DMA_CK>;
+		clock-names = "main", "dma";
+	};
-- 
1.8.1.1.dirty