[PATCH 2/4] media: ov2640: add primary dt support

[Josh Wu]

Add device tree support for ov2640.

Cc: devicetree at vger.kernel.org
Signed-off-by: Josh Wu <josh.wu at atmel.com>
---
 drivers/media/i2c/soc_camera/ov2640.c | 95 ++++++++++++++++++++++++++++++++---
 1 file changed, 89 insertions(+), 6 deletions(-)

diff --git a/drivers/media/i2c/soc_camera/ov2640.c b/drivers/media/i2c/soc_camera/ov2640.c
index 9ee910d..6506126 100644
--- a/drivers/media/i2c/soc_camera/ov2640.c
+++ b/drivers/media/i2c/soc_camera/ov2640.c
@@ -18,6 +18,8 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
 #include <linux/v4l2-mediabus.h>
 #include <linux/videodev2.h>
 
@@ -283,6 +285,10 @@ struct ov2640_priv {
 	u32	cfmt_code;
 	struct v4l2_clk			*clk;
 	const struct ov2640_win_size	*win;
+
+	struct soc_camera_subdev_desc	ssdd_dt;
+	int reset_pin;
+	int pwr_down_pin;
 };
 
 /*
@@ -1047,6 +1053,70 @@ static struct v4l2_subdev_ops ov2640_subdev_ops = {
 	.video	= &ov2640_subdev_video_ops,
 };
 
+/* OF probe functions */
+static int ov2640_hw_power(struct device *dev, int on)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ov2640_priv *priv = to_ov2640(client);
+
+	dev_dbg(&client->dev, "%s: %s the camera\n",
+			__func__, on ? "ENABLE" : "DISABLE");
+
+	/* enable or disable the camera */
+	gpio_direction_output(priv->pwr_down_pin, !on);
+
+	return 0;
+}
+
+static int ov2640_hw_reset(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ov2640_priv *priv = to_ov2640(client);
+
+	/* If enabled, give a reset impulse */
+	gpio_direction_output(priv->reset_pin, 0);
+	msleep(20);
+	gpio_direction_output(priv->reset_pin, 1);
+	msleep(100);
+
+	return 0;
+}
+
+static int ov2640_probe_dt(struct i2c_client *client,
+		struct ov2640_priv *priv)
+{
+	struct device_node *np = client->dev.of_node;
+	int ret;
+
+	priv->reset_pin = of_get_named_gpio(np, "reset-gpio", 0);
+	priv->pwr_down_pin = of_get_named_gpio(np, "power-down-gpio", 0);
+	if (!gpio_is_valid(priv->reset_pin) ||
+			!gpio_is_valid(priv->pwr_down_pin))
+		return -EINVAL;
+
+	ret = devm_gpio_request(&client->dev, priv->pwr_down_pin,
+			"power-down-pin");
+	if (ret < 0) {
+		dev_err(&client->dev, "request gpio pin %d failed\n",
+				priv->pwr_down_pin);
+		return ret;
+	}
+
+	ret = devm_gpio_request(&client->dev, priv->reset_pin, "reset_pin");
+	if (ret < 0) {
+		dev_err(&client->dev, "request gpio pin %d failed\n",
+				priv->reset_pin);
+		return ret;
+	}
+
+	/* Initialize the soc_camera_subdev_desc */
+	priv->ssdd_dt.power = ov2640_hw_power;
+	priv->ssdd_dt.reset = ov2640_hw_reset;
+	client->dev.platform_data = &priv->ssdd_dt;
+
+	return 0;
+}
+
 /*
  * i2c_driver functions
  */
@@ -1058,12 +1128,6 @@ static int ov2640_probe(struct i2c_client *client,
 	struct i2c_adapter	*adapter = to_i2c_adapter(client->dev.parent);
 	int			ret;
 
-	if (!ssdd) {
-		dev_err(&adapter->dev,
-			"OV2640: Missing platform_data for driver\n");
-		return -EINVAL;
-	}
-
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		dev_err(&adapter->dev,
 			"OV2640: I2C-Adapter doesn't support SMBUS\n");
@@ -1077,6 +1141,18 @@ static int ov2640_probe(struct i2c_client *client,
 		return -ENOMEM;
 	}
 
+	if (!ssdd) {
+		if (client->dev.of_node) {
+			ret = ov2640_probe_dt(client, priv);
+			if (ret)
+				return ret;
+		} else {
+			dev_err(&client->dev,
+				"Missing platform_data for driver\n");
+			return  -EINVAL;
+		}
+	}
+
 	v4l2_i2c_subdev_init(&priv->subdev, client, &ov2640_subdev_ops);
 	v4l2_ctrl_handler_init(&priv->hdl, 2);
 	v4l2_ctrl_new_std(&priv->hdl, &ov2640_ctrl_ops,
@@ -1123,9 +1199,16 @@ static const struct i2c_device_id ov2640_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ov2640_id);
 
+static const struct of_device_id ov2640_of_match[] = {
+	{.compatible = "omnivision,ov2640", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ov2640_of_match);
+
 static struct i2c_driver ov2640_i2c_driver = {
 	.driver = {
 		.name = "ov2640",
+		.of_match_table = of_match_ptr(ov2640_of_match),
 	},
 	.probe    = ov2640_probe,
 	.remove   = ov2640_remove,
-- 
1.9.1