[PATCH v3 1/3] devicetree: of: Add bindings for chosen node, stdout-path

Grant Likely grant.likely at linaro.org
Thu Nov 27 16:22:20 PST 2014


On Thu, 27 Nov 2014 18:41:33 +0000
, Mark Rutland <mark.rutland at arm.com>
 wrote:
> On Thu, Nov 27, 2014 at 05:56:05PM +0000, Leif Lindholm wrote:
> > Add a global binding for the chosen node.
> > Include a description of the stdout-path, and an explicit statement on
> > its extra options in the context of a UART console.
> > 
> > Opening description stolen from www.devicetree.org, and part of the
> > remaining text provided by Mark Rutland.
> > 
> > Signed-off-by: Leif Lindholm <leif.lindholm at linaro.org>
> > ---
> >  Documentation/devicetree/bindings/chosen.txt |   42 ++++++++++++++++++++++++++
> >  1 file changed, 42 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/chosen.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt
> > new file mode 100644
> > index 0000000..9cd74e9
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/chosen.txt
> > @@ -0,0 +1,42 @@
> > +The chosen node
> > +---------------
> > +
> > +The chosen node does not represent a real device, but serves as a place
> > +for passing data between firmware and the operating system, like boot
> > +arguments. Data in the chosen node does not represent the hardware.
> > +
> > +
> > +stdout-path property
> > +--------------------
> > +
> > +Device trees may specify the device to be used for boot console output
> > +with a stdout-path property under /chosen, as described in ePAPR, e.g.
> > +
> > +/ {
> > +	chosen {
> > +		stdout-path = "/serial at f00:115200";
> > +	};
> > +
> > +	serial at f00 {
> > +		compatible = "vendor,some-uart";
> > +		reg = <0xf00 0x10>;
> > +	};
> > +};
> > +
> > +If the character ":" is present in the value, this terminates the path.
> > +The meaning of any characters following the ":" is device-specific, and
> > +must be specified in the relevant binding documentation.
> > +
> > +For UART devices, the format supported by uart_parse_options() is the
> > +expected one. In this case, the format of the string is:
> 
> Please drop the mention of uart_parse_options and just describe the
> format. Linux internal details are irrelevant to the contract of the
> binding.
> 
> Otherwise this looks good to me!

I've fixed it up and merged it. No need to respin. Thanks!

g.




More information about the linux-arm-kernel mailing list