[PATCH] arm64: ARM: Fix the Generic Timers interrupt active level description

Liviu Dudau Liviu.Dudau at arm.com
Thu Nov 27 07:34:54 PST 2014


On Thu, Nov 27, 2014 at 02:43:38PM +0000, Marc Zyngier wrote:
> On 27/11/14 14:36, Liviu Dudau wrote:
> > The Cortex-A5x TRM states in paragraph "9.2 Generic Timer functional
> > description" that generic timers provide an active-LOW interrupt
> > output. Fix the device trees to correctly describe this.
> > 
> > While doing this update the CPU mask to match the number of described
> > CPUs as well.
> > 
> > Signed-off-by: Liviu Dudau <Liviu.Dudau at arm.com>
> > ---
> > 
> > Arnd, Olof: This is on top of linux-next/master as it patches the Juno
> > as well as all the other ARM DTs.
> > 
> >  arch/arm64/boot/dts/arm/foundation-v8.dts  | 8 ++++----
> >  arch/arm64/boot/dts/arm/juno.dts           | 8 ++++----
> >  arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts | 8 ++++----
> >  3 files changed, 12 insertions(+), 12 deletions(-)
> > 
> > diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts
> > index 4a06090..27f3296 100644
> > --- a/arch/arm64/boot/dts/arm/foundation-v8.dts
> > +++ b/arch/arm64/boot/dts/arm/foundation-v8.dts
> > @@ -78,10 +78,10 @@
> >  
> >  	timer {
> >  		compatible = "arm,armv8-timer";
> > -		interrupts = <1 13 0xff01>,
> > -			     <1 14 0xff01>,
> > -			     <1 11 0xff01>,
> > -			     <1 10 0xff01>;
> > +		interrupts = <1 13 0xf08>,
> > +			     <1 14 0xf08>,
> > +			     <1 11 0xf08>,
> > +			     <1 10 0xf08>;
> >  		clock-frequency = <100000000>;
> >  	};
> >  
> > diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
> > index 097ecc4..cb3073e 100644
> > --- a/arch/arm64/boot/dts/arm/juno.dts
> > +++ b/arch/arm64/boot/dts/arm/juno.dts
> > @@ -98,10 +98,10 @@
> >  
> >  	timer {
> >  		compatible = "arm,armv8-timer";
> > -		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_EDGE_RISING)>,
> > -			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_EDGE_RISING)>,
> > -			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_EDGE_RISING)>,
> > -			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_EDGE_RISING)>;
> > +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
> > +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
> > +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
> > +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
> >  	};
> >  
> >  	pmu {
> > diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
> > index 572005e..efc59b3 100644
> > --- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
> > +++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
> > @@ -81,10 +81,10 @@
> >  
> >  	timer {
> >  		compatible = "arm,armv8-timer";
> > -		interrupts = <1 13 0xff01>,
> > -			     <1 14 0xff01>,
> > -			     <1 11 0xff01>,
> > -			     <1 10 0xff01>;
> > +		interrupts = <1 13 0xf08>,
> > +			     <1 14 0xf08>,
> > +			     <1 11 0xf08>,
> > +			     <1 10 0xf08>;
> >  		clock-frequency = <100000000>;
> >  	};
> >  
> > 
> 
> Sorry, but that's wrong. Despite the *cores* having an level-low output,
> the GIC only triggers on *level-high*. Yes, there is probably an
> inverter in between.

BTW, should I also update the bindings example to get this right?

Regards,
Liviu

> 
> 	M.
> -- 
> Jazz is not dead. It just smells funny...
> 

-- 
====================
| I would like to |
| fix the world,  |
| but they're not |
| giving me the   |
 \ source code!  /
  ---------------
    ¯\_(ツ)_/¯




More information about the linux-arm-kernel mailing list