[PATCH 3/3] ARM: edma: Split up header file to platform_data and API file
Peter Ujfalusi
peter.ujfalusi at ti.com
Thu Nov 27 02:41:31 PST 2014
include/linux/platform_data/ is not a correct place to keep the API
definitions for edma, it is meant to be only for the pdata for the device.
Clean up this by moving the API to include/linux/edma.h
Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
---
arch/arm/common/edma.c | 3 +-
arch/arm/mach-davinci/devices.c | 1 +
arch/arm/mach-davinci/include/mach/da8xx.h | 1 +
drivers/dma/edma.c | 2 +-
include/linux/edma.h | 153 +++++++++++++++++++++++++++++
include/linux/platform_data/edma.h | 148 ++--------------------------
sound/soc/davinci/davinci-pcm.h | 1 +
7 files changed, 165 insertions(+), 144 deletions(-)
create mode 100644 include/linux/edma.h
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index bac677e65c76..6c49887d326e 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -25,6 +25,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/edma.h>
#include <linux/edma-dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/of_address.h>
@@ -33,8 +34,6 @@
#include <linux/of_irq.h>
#include <linux/pm_runtime.h>
-#include <linux/platform_data/edma.h>
-
/* Offsets matching "struct edmacc_param" */
#define PARM_OPT 0x00
#define PARM_SRC 0x04
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 6257aa452568..28572ef24d9c 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -23,6 +23,7 @@
#include <linux/platform_data/mmc-davinci.h>
#include <mach/time.h>
#include <linux/platform_data/edma.h>
+#include <linux/edma.h>
#include "davinci.h"
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 39e58b48e826..313129cb6f4a 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -23,6 +23,7 @@
#include <mach/serial.h>
#include <mach/pm.h>
#include <linux/platform_data/edma.h>
+#include <linux/edma.h>
#include <linux/platform_data/i2c-davinci.h>
#include <linux/platform_data/mmc-davinci.h>
#include <linux/platform_data/usb-davinci.h>
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 8880d6977e5d..126048e79dfc 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -25,7 +25,7 @@
#include <linux/spinlock.h>
#include <linux/of.h>
-#include <linux/platform_data/edma.h>
+#include <linux/edma.h>
#include "dmaengine.h"
#include "virt-dma.h"
diff --git a/include/linux/edma.h b/include/linux/edma.h
new file mode 100644
index 000000000000..9df92198c117
--- /dev/null
+++ b/include/linux/edma.h
@@ -0,0 +1,153 @@
+/*
+ * TI EDMA definitions
+ *
+ * Copyright (C) 2006-2013 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This EDMA3 programming framework exposes two basic kinds of resource:
+ *
+ * Channel Triggers transfers, usually from a hardware event but
+ * also manually or by "chaining" from DMA completions.
+ * Each channel is coupled to a Parameter RAM (PaRAM) slot.
+ *
+ * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM
+ * "set"), source and destination addresses, a link to a
+ * next PaRAM slot (if any), options for the transfer, and
+ * instructions for updating those addresses. There are
+ * more than twice as many slots as event channels.
+ *
+ * Each PaRAM set describes a sequence of transfers, either for one large
+ * buffer or for several discontiguous smaller buffers. An EDMA transfer
+ * is driven only from a channel, which performs the transfers specified
+ * in its PaRAM slot until there are no more transfers. When that last
+ * transfer completes, the "link" field may be used to reload the channel's
+ * PaRAM slot with a new transfer descriptor.
+ *
+ * The EDMA Channel Controller (CC) maps requests from channels into physical
+ * Transfer Controller (TC) requests when the channel triggers (by hardware
+ * or software events, or by chaining). The two physical DMA channels provided
+ * by the TCs are thus shared by many logical channels.
+ *
+ * DaVinci hardware also has a "QDMA" mechanism which is not currently
+ * supported through this interface. (DSP firmware uses it though.)
+ */
+
+#ifndef __LINUX_EDMA_H_
+#define __LINUX_EDMA_H_
+
+#include <linux/platform_data/edma.h>
+
+/* PaRAM slots are laid out like this */
+struct edmacc_param {
+ u32 opt;
+ u32 src;
+ u32 a_b_cnt;
+ u32 dst;
+ u32 src_dst_bidx;
+ u32 link_bcntrld;
+ u32 src_dst_cidx;
+ u32 ccnt;
+} __packed;
+
+/* fields in edmacc_param.opt */
+#define SAM BIT(0)
+#define DAM BIT(1)
+#define SYNCDIM BIT(2)
+#define STATIC BIT(3)
+#define EDMA_FWID (0x07 << 8)
+#define TCCMODE BIT(11)
+#define EDMA_TCC(t) ((t) << 12)
+#define TCINTEN BIT(20)
+#define ITCINTEN BIT(21)
+#define TCCHEN BIT(22)
+#define ITCCHEN BIT(23)
+
+/* ch_status parameter of callback function possible values*/
+#define EDMA_DMA_COMPLETE 1
+#define EDMA_DMA_CC_ERROR 2
+#define EDMA_DMA_TC1_ERROR 3
+#define EDMA_DMA_TC2_ERROR 4
+
+enum address_mode {
+ INCR = 0,
+ FIFO = 1
+};
+
+enum fifo_width {
+ W8BIT = 0,
+ W16BIT = 1,
+ W32BIT = 2,
+ W64BIT = 3,
+ W128BIT = 4,
+ W256BIT = 5
+};
+
+enum sync_dimension {
+ ASYNC = 0,
+ ABSYNC = 1
+};
+
+#define EDMA_CTLR_CHAN(ctlr, chan) (((ctlr) << 16) | (chan))
+#define EDMA_CTLR(i) ((i) >> 16)
+#define EDMA_CHAN_SLOT(i) ((i) & 0xffff)
+
+#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */
+#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */
+#define EDMA_CONT_PARAMS_ANY 1001
+#define EDMA_CONT_PARAMS_FIXED_EXACT 1002
+#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003
+
+/* alloc/free DMA channels and their dedicated parameter RAM slots */
+int edma_alloc_channel(int channel,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data, enum dma_event_q);
+void edma_free_channel(unsigned channel);
+
+/* alloc/free parameter RAM slots */
+int edma_alloc_slot(unsigned ctlr, int slot);
+void edma_free_slot(unsigned slot);
+
+/* alloc/free a set of contiguous parameter RAM slots */
+int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count);
+int edma_free_cont_slots(unsigned slot, int count);
+
+/* calls that operate on part of a parameter RAM slot */
+void edma_set_src(unsigned slot, dma_addr_t src_port, enum address_mode mode,
+ enum fifo_width);
+void edma_set_dest(unsigned slot, dma_addr_t dest_port, enum address_mode mode,
+ enum fifo_width);
+dma_addr_t edma_get_position(unsigned slot, bool dst);
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
+void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
+ u16 bcnt_rld, enum sync_dimension sync_mode);
+void edma_link(unsigned from, unsigned to);
+void edma_unlink(unsigned from);
+
+/* calls that operate on an entire parameter RAM slot */
+void edma_write_slot(unsigned slot, const struct edmacc_param *params);
+void edma_read_slot(unsigned slot, struct edmacc_param *params);
+
+/* channel control operations */
+int edma_start(unsigned channel);
+void edma_stop(unsigned channel);
+void edma_clean_channel(unsigned channel);
+void edma_clear_event(unsigned channel);
+void edma_pause(unsigned channel);
+void edma_resume(unsigned channel);
+
+void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no);
+
+int edma_trigger_channel(unsigned);
+
+#endif /* __LINUX_EDMA_H_ */
diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
index bdb2710e2aab..aaf6fc5769eb 100644
--- a/include/linux/platform_data/edma.h
+++ b/include/linux/platform_data/edma.h
@@ -8,83 +8,10 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
-
-/*
- * This EDMA3 programming framework exposes two basic kinds of resource:
- *
- * Channel Triggers transfers, usually from a hardware event but
- * also manually or by "chaining" from DMA completions.
- * Each channel is coupled to a Parameter RAM (PaRAM) slot.
- *
- * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM
- * "set"), source and destination addresses, a link to a
- * next PaRAM slot (if any), options for the transfer, and
- * instructions for updating those addresses. There are
- * more than twice as many slots as event channels.
- *
- * Each PaRAM set describes a sequence of transfers, either for one large
- * buffer or for several discontiguous smaller buffers. An EDMA transfer
- * is driven only from a channel, which performs the transfers specified
- * in its PaRAM slot until there are no more transfers. When that last
- * transfer completes, the "link" field may be used to reload the channel's
- * PaRAM slot with a new transfer descriptor.
- *
- * The EDMA Channel Controller (CC) maps requests from channels into physical
- * Transfer Controller (TC) requests when the channel triggers (by hardware
- * or software events, or by chaining). The two physical DMA channels provided
- * by the TCs are thus shared by many logical channels.
- *
- * DaVinci hardware also has a "QDMA" mechanism which is not currently
- * supported through this interface. (DSP firmware uses it though.)
- */
-
#ifndef EDMA_H_
#define EDMA_H_
-/* PaRAM slots are laid out like this */
-struct edmacc_param {
- u32 opt;
- u32 src;
- u32 a_b_cnt;
- u32 dst;
- u32 src_dst_bidx;
- u32 link_bcntrld;
- u32 src_dst_cidx;
- u32 ccnt;
-} __packed;
-
-/* fields in edmacc_param.opt */
-#define SAM BIT(0)
-#define DAM BIT(1)
-#define SYNCDIM BIT(2)
-#define STATIC BIT(3)
-#define EDMA_FWID (0x07 << 8)
-#define TCCMODE BIT(11)
-#define EDMA_TCC(t) ((t) << 12)
-#define TCINTEN BIT(20)
-#define ITCINTEN BIT(21)
-#define TCCHEN BIT(22)
-#define ITCCHEN BIT(23)
-
-/*ch_status paramater of callback function possible values*/
-#define EDMA_DMA_COMPLETE 1
-#define EDMA_DMA_CC_ERROR 2
-#define EDMA_DMA_TC1_ERROR 3
-#define EDMA_DMA_TC2_ERROR 4
-
-enum address_mode {
- INCR = 0,
- FIFO = 1
-};
-
-enum fifo_width {
- W8BIT = 0,
- W16BIT = 1,
- W32BIT = 2,
- W64BIT = 3,
- W128BIT = 4,
- W256BIT = 5
-};
+#define EDMA_MAX_CC 2
enum dma_event_q {
EVENTQ_0 = 0,
@@ -94,68 +21,9 @@ enum dma_event_q {
EVENTQ_DEFAULT = -1
};
-enum sync_dimension {
- ASYNC = 0,
- ABSYNC = 1
-};
-
-#define EDMA_CTLR_CHAN(ctlr, chan) (((ctlr) << 16) | (chan))
-#define EDMA_CTLR(i) ((i) >> 16)
-#define EDMA_CHAN_SLOT(i) ((i) & 0xffff)
-
-#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */
-#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */
-#define EDMA_CONT_PARAMS_ANY 1001
-#define EDMA_CONT_PARAMS_FIXED_EXACT 1002
-#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003
-
-#define EDMA_MAX_CC 2
-
-/* alloc/free DMA channels and their dedicated parameter RAM slots */
-int edma_alloc_channel(int channel,
- void (*callback)(unsigned channel, u16 ch_status, void *data),
- void *data, enum dma_event_q);
-void edma_free_channel(unsigned channel);
-
-/* alloc/free parameter RAM slots */
-int edma_alloc_slot(unsigned ctlr, int slot);
-void edma_free_slot(unsigned slot);
-
-/* alloc/free a set of contiguous parameter RAM slots */
-int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count);
-int edma_free_cont_slots(unsigned slot, int count);
-
-/* calls that operate on part of a parameter RAM slot */
-void edma_set_src(unsigned slot, dma_addr_t src_port,
- enum address_mode mode, enum fifo_width);
-void edma_set_dest(unsigned slot, dma_addr_t dest_port,
- enum address_mode mode, enum fifo_width);
-dma_addr_t edma_get_position(unsigned slot, bool dst);
-void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
-void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
-void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
- u16 bcnt_rld, enum sync_dimension sync_mode);
-void edma_link(unsigned from, unsigned to);
-void edma_unlink(unsigned from);
-
-/* calls that operate on an entire parameter RAM slot */
-void edma_write_slot(unsigned slot, const struct edmacc_param *params);
-void edma_read_slot(unsigned slot, struct edmacc_param *params);
-
-/* channel control operations */
-int edma_start(unsigned channel);
-void edma_stop(unsigned channel);
-void edma_clean_channel(unsigned channel);
-void edma_clear_event(unsigned channel);
-void edma_pause(unsigned channel);
-void edma_resume(unsigned channel);
-
-void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no);
-
struct edma_rsv_info {
-
- const s16 (*rsv_chans)[2];
- const s16 (*rsv_slots)[2];
+ const s16 (*rsv_chans)[2];
+ const s16 (*rsv_slots)[2];
};
/* platform_data for EDMA driver */
@@ -165,15 +33,13 @@ struct edma_soc_info {
* This way, long transfers on the default queue started
* by the codec engine will not cause audio defects.
*/
- enum dma_event_q default_queue;
+ enum dma_event_q default_queue;
/* Resource reservation for other cores */
- struct edma_rsv_info *rsv;
+ struct edma_rsv_info *rsv;
- s8 (*queue_priority_mapping)[2];
- const s16 (*xbar_chans)[2];
+ s8 (*queue_priority_mapping)[2];
+ const s16 (*xbar_chans)[2];
};
-int edma_trigger_channel(unsigned);
-
#endif
diff --git a/sound/soc/davinci/davinci-pcm.h b/sound/soc/davinci/davinci-pcm.h
index 0fe2346a9aa2..ddc07de04067 100644
--- a/sound/soc/davinci/davinci-pcm.h
+++ b/sound/soc/davinci/davinci-pcm.h
@@ -15,6 +15,7 @@
#include <linux/genalloc.h>
#include <linux/platform_data/davinci_asp.h>
#include <linux/platform_data/edma.h>
+#include <linux/edma.h>
struct davinci_pcm_dma_params {
int channel; /* sync dma channel ID */
--
2.1.3
More information about the linux-arm-kernel
mailing list