[PATCH] arm: omap2: rx51-peripherals: fix build warning

[Hans Verkuil]

On 11/26/2014 09:27 PM, Felipe Balbi wrote:
> commit 68a3c04 ([media] ARM: OMAP2: RX-51: update
> si4713 platform data) updated board-rx51-peripherals.c
> so that si4713 could be easily used on DT boot, but
> it ended up introducing a build warning whenever
> si4713 isn't enabled.
> 
> This patches fixes that warning:
> 
> arch/arm/mach-omap2/board-rx51-peripherals.c:1000:36: warning: \
> 	‘rx51_si4713_platform_data’ defined but not used [-Wunused-variable]
>  static struct si4713_platform_data rx51_si4713_platform_data = {
> 
> Cc: Sebastian Reichel <sre at kernel.org>
> Cc: Tony Lindgren <tony at atomide.com>
> Cc: Hans Verkuil <hans.verkuil at cisco.com>
> Cc: Mauro Carvalho Chehab <mchehab at osg.samsung.com>
> Signed-off-by: Felipe Balbi <balbi at ti.com>

Acked-by: Hans Verkuil <hans.verkuil at cisco.com>

> ---
>  arch/arm/mach-omap2/board-rx51-peripherals.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
> index d18a5cf..bda20c5 100644
> --- a/arch/arm/mach-omap2/board-rx51-peripherals.c
> +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
> @@ -997,9 +997,11 @@ static struct aic3x_pdata rx51_aic3x_data2 = {
>  	.gpio_reset = 60,
>  };
>  
> +#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
>  static struct si4713_platform_data rx51_si4713_platform_data = {
>  	.is_platform_device = true
>  };
> +#endif
>  
>  static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
>  #if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
>