[PATCH v13 04/10] arm: dts: qcom: Add power-controller device node for 8074 Krait CPUs

Lina Iyer lina.iyer at linaro.org
Wed Nov 26 21:24:08 PST 2014


Each Krait CPU in the QCOM 8074/8974 SoC has an SAW power controller to
regulate the power to the cpu and aide the core in entering idle states.
Reference the SAW instance and associate the instance with the CPU core.

Signed-off-by: Lina Iyer <lina.iyer at linaro.org>
Reviewed-by: Stephen Boyd <sboyd at codeaurora.org>
---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index e265ec1..5a41f44 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -21,6 +21,7 @@
 			reg = <0>;
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
 		};
 
 		cpu at 1 {
@@ -30,6 +31,7 @@
 			reg = <1>;
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
 		};
 
 		cpu at 2 {
@@ -39,6 +41,7 @@
 			reg = <2>;
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
 		};
 
 		cpu at 3 {
@@ -48,6 +51,7 @@
 			reg = <3>;
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
 		};
 
 		L2: l2-cache {
@@ -144,7 +148,27 @@
 			};
 		};
 
-		saw_l2: regulator at f9012000 {
+		saw0: power-controller at f9089000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu";
+			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw1: power-controller at f9099000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu";
+			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw2: power-controller at f90a9000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu";
+			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw3: power-controller at f90b9000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu";
+			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw_l2: power-controller at f9012000 {
 			compatible = "qcom,saw2";
 			reg = <0xf9012000 0x1000>;
 			regulator;
-- 
2.1.0




More information about the linux-arm-kernel mailing list