[PATCHv1 0/6] rtc: rtc-isl12057: fixes and alarm support

[Arnaud Ebalard]

Hi,

Uwe Kleine-König <uwe at kleine-koenig.org> writes:

> On 11/26/2014 07:35 PM, Arnaud Ebalard wrote:
>> I wonder if you could take a look at this series I sent providing fixes
>> (patches #1-5) and alarm support (patch #6) for ISL12057 RTC Chip. As
>> all people do for RTC patches - due to lack of feedback from maintainer
>> - I am looking for someone to review the patches (Mark, patch 6 has a
>> sticker w/ regmap-inside ;-)) and then push those upstream if they are
>> ok (Jason, you handled that part for 70e123373c05: "rtc: Add support for
>> Intersil ISL12057 I2C RTC chip" in 2013 for the same reason).
>> 
>> Note that I addressed previous comments and feedback received from Uwe
>> and also spent time to do some soldering in order to support and test
>> the last patch for both my use case (Alarm IRQ signal not routed to the
>> SoC on ReadyNAS RN102, RN104 and RN2120) and the common case.
>> 
>> Do not hesitate to ask if you want me to resend!
> akpm already applied the series, doesn't he?

I am not really familiar w/ -mm tree workflow. It was not clear to me
whether it was sitting in -mm tree waiting for reviewed-by and
acked-by.

> I'm about to test the patches, just fighting with my NAS to boot my
> custom kernel.
>
> Apart from that patches 1 - 5 can have my Ack. Didn't look deep enough
> into patch 6 yet. @akpm: No need to hurry adding them, I hope to be
> able to also provide Tested-by:-tags later today.

I'll be happy to handle comments and possible requests for additional
changes if needed.

Cheers,

a+

ps: anyway, thanks Andrew!