[PATCH 1/2] phy: add the Berlin USB PHY driver
Sebastian Hesselbarth
sebastian.hesselbarth at gmail.com
Wed Nov 26 05:43:39 PST 2014
On 11/20/2014 10:53 PM, Sebastian Hesselbarth wrote:
> From: Antoine Tenart <antoine.tenart at free-electrons.com>
>
> Add the driver driving the Marvell Berlin USB PHY. This allows to
> initialize the PHY and to use it from the USB driver later.
>
> Signed-off-by: Antoine Tenart <antoine.tenart at free-electrons.com>
Gentle ping.
Kishon, anything wrong with these two patches?
Sebastian
> ---
> Split-off patches from latest Berlin USB PHY patches
> https://lkml.kernel.org/g/1416231347-27193-1-git-send-email-antoine.tenart@free-electrons.com
>
> Cc: Kishon Vijay Abraham I <kishon at ti.com>
> Cc: Grant Likely <grant.likely at linaro.org>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Antoine Tenart <antoine.tenart at free-electrons.com>
> Cc: devicetree at vger.kernel.org
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-kernel at vger.kernel.org
> ---
> drivers/phy/Kconfig | 7 ++
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-berlin-usb.c | 224 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 232 insertions(+), 0 deletions(-)
> create mode 100644 drivers/phy/phy-berlin-usb.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 2a436e6..38ca6ff 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -15,6 +15,13 @@ config GENERIC_PHY
> phy users can obtain reference to the PHY. All the users of this
> framework should select this config.
>
> +config PHY_BERLIN_USB
> + tristate "Marvell Berlin USB PHY Driver"
> + depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
> + select GENERIC_PHY
> + help
> + Enable this to support the USB PHY on Marvell Berlin SoCs.
> +
> config PHY_BERLIN_SATA
> tristate "Marvell Berlin SATA PHY driver"
> depends on ARCH_BERLIN && HAS_IOMEM && OF
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index c4590fc..6fd1f77 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -3,6 +3,7 @@
> #
>
> obj-$(CONFIG_GENERIC_PHY) += phy-core.o
> +obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
> obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
> obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
> obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
> diff --git a/drivers/phy/phy-berlin-usb.c b/drivers/phy/phy-berlin-usb.c
> new file mode 100644
> index 0000000..f9f1306
> --- /dev/null
> +++ b/drivers/phy/phy-berlin-usb.c
> @@ -0,0 +1,224 @@
> +/*
> + * Copyright (C) 2014 Marvell Technology Group Ltd.
> + *
> + * Antoine Tenart <antoine.tenart at free-electrons.com>
> + * Jisheng Zhang <jszhang at marvell.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/gpio.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_gpio.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +
> +#define USB_PHY_PLL 0x04
> +#define USB_PHY_PLL_CONTROL 0x08
> +#define USB_PHY_TX_CTRL0 0x10
> +#define USB_PHY_TX_CTRL1 0x14
> +#define USB_PHY_TX_CTRL2 0x18
> +#define USB_PHY_RX_CTRL 0x20
> +#define USB_PHY_ANALOG 0x34
> +
> +/* USB_PHY_PLL */
> +#define CLK_REF_DIV(x) ((x) << 4)
> +#define FEEDBACK_CLK_DIV(x) ((x) << 8)
> +
> +/* USB_PHY_PLL_CONTROL */
> +#define CLK_STABLE BIT(0)
> +#define PLL_CTRL_PIN BIT(1)
> +#define PLL_CTRL_REG BIT(2)
> +#define PLL_ON BIT(3)
> +#define PHASE_OFF_TOL_125 (0x0 << 5)
> +#define PHASE_OFF_TOL_250 BIT(5)
> +#define KVC0_CALIB (0x0 << 9)
> +#define KVC0_REG_CTRL BIT(9)
> +#define KVC0_HIGH (0x0 << 10)
> +#define KVC0_LOW (0x3 << 10)
> +#define CLK_BLK_EN BIT(13)
> +
> +/* USB_PHY_TX_CTRL0 */
> +#define EXT_HS_RCAL_EN BIT(3)
> +#define EXT_FS_RCAL_EN BIT(4)
> +#define IMPCAL_VTH_DIV(x) ((x) << 5)
> +#define EXT_RS_RCAL_DIV(x) ((x) << 8)
> +#define EXT_FS_RCAL_DIV(x) ((x) << 12)
> +
> +/* USB_PHY_TX_CTRL1 */
> +#define TX_VDD15_14 (0x0 << 4)
> +#define TX_VDD15_15 BIT(4)
> +#define TX_VDD15_16 (0x2 << 4)
> +#define TX_VDD15_17 (0x3 << 4)
> +#define TX_VDD12_VDD (0x0 << 6)
> +#define TX_VDD12_11 BIT(6)
> +#define TX_VDD12_12 (0x2 << 6)
> +#define TX_VDD12_13 (0x3 << 6)
> +#define LOW_VDD_EN BIT(8)
> +#define TX_OUT_AMP(x) ((x) << 9)
> +
> +/* USB_PHY_TX_CTRL2 */
> +#define TX_CHAN_CTRL_REG(x) ((x) << 0)
> +#define DRV_SLEWRATE(x) ((x) << 4)
> +#define IMP_CAL_FS_HS_DLY_0 (0x0 << 6)
> +#define IMP_CAL_FS_HS_DLY_1 BIT(6)
> +#define IMP_CAL_FS_HS_DLY_2 (0x2 << 6)
> +#define IMP_CAL_FS_HS_DLY_3 (0x3 << 6)
> +#define FS_DRV_EN_MASK(x) ((x) << 8)
> +#define HS_DRV_EN_MASK(x) ((x) << 12)
> +
> +/* USB_PHY_RX_CTRL */
> +#define PHASE_FREEZE_DLY_2_CL (0x0 << 0)
> +#define PHASE_FREEZE_DLY_4_CL BIT(0)
> +#define ACK_LENGTH_8_CL (0x0 << 2)
> +#define ACK_LENGTH_12_CL BIT(2)
> +#define ACK_LENGTH_16_CL (0x2 << 2)
> +#define ACK_LENGTH_20_CL (0x3 << 2)
> +#define SQ_LENGTH_3 (0x0 << 4)
> +#define SQ_LENGTH_6 BIT(4)
> +#define SQ_LENGTH_9 (0x2 << 4)
> +#define SQ_LENGTH_12 (0x3 << 4)
> +#define DISCON_THRESHOLD_260 (0x0 << 6)
> +#define DISCON_THRESHOLD_270 BIT(6)
> +#define DISCON_THRESHOLD_280 (0x2 << 6)
> +#define DISCON_THRESHOLD_290 (0x3 << 6)
> +#define SQ_THRESHOLD(x) ((x) << 8)
> +#define LPF_COEF(x) ((x) << 12)
> +#define INTPL_CUR_10 (0x0 << 14)
> +#define INTPL_CUR_20 BIT(14)
> +#define INTPL_CUR_30 (0x2 << 14)
> +#define INTPL_CUR_40 (0x3 << 14)
> +
> +/* USB_PHY_ANALOG */
> +#define ANA_PWR_UP BIT(1)
> +#define ANA_PWR_DOWN BIT(2)
> +#define V2I_VCO_RATIO(x) ((x) << 7)
> +#define R_ROTATE_90 (0x0 << 10)
> +#define R_ROTATE_0 BIT(10)
> +#define MODE_TEST_EN BIT(11)
> +#define ANA_TEST_DC_CTRL(x) ((x) << 12)
> +
> +#define to_phy_berlin_usb_priv(p) \
> + container_of((p), struct phy_berlin_usb_priv, phy)
> +
> +static const u32 phy_berlin_pll_dividers[] = {
> + /* Berlin 2 */
> + CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54),
> + /* Berlin 2CD */
> + CLK_REF_DIV(0x6) | FEEDBACK_CLK_DIV(0x55),
> +};
> +
> +struct phy_berlin_usb_priv {
> + void __iomem *base;
> + struct phy *phy;
> + struct reset_control *rst_ctrl;
> + u32 pll_divider;
> +};
> +
> +static int phy_berlin_usb_power_on(struct phy *phy)
> +{
> + struct phy_berlin_usb_priv *priv = dev_get_drvdata(phy->dev.parent);
> +
> + reset_control_reset(priv->rst_ctrl);
> +
> + writel(priv->pll_divider,
> + priv->base + USB_PHY_PLL);
> + writel(CLK_STABLE | PLL_CTRL_REG | PHASE_OFF_TOL_250 | KVC0_REG_CTRL |
> + CLK_BLK_EN, priv->base + USB_PHY_PLL_CONTROL);
> + writel(V2I_VCO_RATIO(0x5) | R_ROTATE_0 | ANA_TEST_DC_CTRL(0x5),
> + priv->base + USB_PHY_ANALOG);
> + writel(PHASE_FREEZE_DLY_4_CL | ACK_LENGTH_16_CL | SQ_LENGTH_12 |
> + DISCON_THRESHOLD_260 | SQ_THRESHOLD(0xa) | LPF_COEF(0x2) |
> + INTPL_CUR_30, priv->base + USB_PHY_RX_CTRL);
> +
> + writel(TX_VDD12_13 | TX_OUT_AMP(0x3), priv->base + USB_PHY_TX_CTRL1);
> + writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4),
> + priv->base + USB_PHY_TX_CTRL0);
> +
> + writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4) |
> + EXT_FS_RCAL_DIV(0x2), priv->base + USB_PHY_TX_CTRL0);
> +
> + writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4),
> + priv->base + USB_PHY_TX_CTRL0);
> + writel(TX_CHAN_CTRL_REG(0xf) | DRV_SLEWRATE(0x3) | IMP_CAL_FS_HS_DLY_3 |
> + FS_DRV_EN_MASK(0xd), priv->base + USB_PHY_TX_CTRL2);
> +
> + return 0;
> +}
> +
> +static struct phy_ops phy_berlin_usb_ops = {
> + .power_on = phy_berlin_usb_power_on,
> + .owner = THIS_MODULE,
> +};
> +
> +static const struct of_device_id phy_berlin_sata_of_match[] = {
> + {
> + .compatible = "marvell,berlin2-usb-phy",
> + .data = &phy_berlin_pll_dividers[0],
> + },
> + {
> + .compatible = "marvell,berlin2cd-usb-phy",
> + .data = &phy_berlin_pll_dividers[1],
> + },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, phy_berlin_sata_of_match);
> +
> +static int phy_berlin_usb_probe(struct platform_device *pdev)
> +{
> + const struct of_device_id *match =
> + of_match_device(phy_berlin_sata_of_match, &pdev->dev);
> + struct phy_berlin_usb_priv *priv;
> + struct resource *res;
> + struct phy_provider *phy_provider;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + priv->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(priv->base))
> + return PTR_ERR(priv->base);
> +
> + priv->rst_ctrl = devm_reset_control_get(&pdev->dev, NULL);
> + if (IS_ERR(priv->rst_ctrl))
> + return PTR_ERR(priv->rst_ctrl);
> +
> + priv->pll_divider = *((u32 *)match->data);
> +
> + priv->phy = devm_phy_create(&pdev->dev, NULL, &phy_berlin_usb_ops,
> + NULL);
> + if (IS_ERR(priv->phy)) {
> + dev_err(&pdev->dev, "failed to create PHY\n");
> + return PTR_ERR(priv->phy);
> + }
> +
> + platform_set_drvdata(pdev, priv);
> +
> + phy_provider =
> + devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
> + if (IS_ERR(phy_provider))
> + return PTR_ERR(phy_provider);
> +
> + return 0;
> +}
> +
> +static struct platform_driver phy_berlin_usb_driver = {
> + .probe = phy_berlin_usb_probe,
> + .driver = {
> + .name = "phy-berlin-usb",
> + .owner = THIS_MODULE,
> + .of_match_table = phy_berlin_sata_of_match,
> + },
> +};
> +module_platform_driver(phy_berlin_usb_driver);
> +
> +MODULE_AUTHOR("Antoine Tenart <antoine.tenart at free-electrons.com>");
> +MODULE_DESCRIPTION("Marvell Berlin PHY driver for USB");
> +MODULE_LICENSE("GPL");
>
More information about the linux-arm-kernel
mailing list