[PATCH v3 5/5] tty/serial: Add Spreadtrum sc9836-uart driver support

[Greg KH]

On Tue, Nov 25, 2014 at 08:16:58PM +0800, Chunyan Zhang wrote:
> Add a full sc9836-uart driver for SC9836 SoC which is based on the
> spreadtrum sharkl64 platform.
> This driver also support earlycon.
> 
> Signed-off-by: Chunyan Zhang <chunyan.zhang at spreadtrum.com>
> Signed-off-by: Orson Zhai <orson.zhai at spreadtrum.com>
> Originally-by: Lanqing Liu <lanqing.liu at spreadtrum.com>

Some objections:

> +static struct platform_driver sprd_platform_driver = {
> +	.probe = sprd_probe,
> +	.remove = sprd_remove,
> +	.suspend = sprd_suspend,
> +	.resume = sprd_resume,
> +	.driver = {
> +		   .name = "sprd_serial",
> +		   .owner = THIS_MODULE,

platform drivers don't need .owner in them anymore, it's handled by the
driver core automatically.


> +		   .of_match_table = of_match_ptr(serial_ids),
> +		   },
> +};
> +
> +static int __init sprd_serial_init(void)
> +{
> +	int ret = 0;
> +
> +	ret = uart_register_driver(&sprd_uart_driver);
> +	if (unlikely(ret != 0))
> +		return ret;

NEVER use unlikely unless you can measure the difference without it.
And even then, you better be able to justify it.  For something as dumb
as this type of check, youare working against the complier and cpu which
already knows that 0 is the usual response.

So please remove all usages of likely/unlikely in this patch series.

> +
> +	ret = platform_driver_register(&sprd_platform_driver);
> +	if (unlikely(ret != 0))
> +		uart_unregister_driver(&sprd_uart_driver);
> +
> +	return ret;
> +}
> +
> +static void __exit sprd_serial_exit(void)
> +{
> +	platform_driver_unregister(&sprd_platform_driver);
> +	uart_unregister_driver(&sprd_uart_driver);
> +}
> +
> +module_init(sprd_serial_init);
> +module_exit(sprd_serial_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("Spreadtrum SoC serial driver series");
> diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
> index 16ad852..d9a8c88 100644
> --- a/include/uapi/linux/serial_core.h
> +++ b/include/uapi/linux/serial_core.h
> @@ -247,4 +247,7 @@
>  /* MESON */
>  #define PORT_MESON	109
>  
> +/* SPRD SERIAL  */
> +#define PORT_SPRD   110

Please use a tab character here.