[PATCH 3/9] ARM: MB86S7X: Add MCPM support
Sudeep Holla
sudeep.holla at arm.com
Tue Nov 25 10:06:57 PST 2014
On 25/11/14 17:42, Nicolas Pitre wrote:
> On Thu, 20 Nov 2014, Vincent Yang wrote:
>
>> The remote firmware(SCB) owns the SMP control. This MCPM driver gets
>> CPU/CLUSTER power up/down done by SCB over mailbox.
>>
>> Signed-off-by: Andy Green <andy.green at linaro.org>
>> Signed-off-by: Jassi Brar <jaswinder.singh at linaro.org>
>> Signed-off-by: Vincent Yang <Vincent.Yang at tw.fujitsu.com>
>> Signed-off-by: Tetsuya Nuriya <nuriya.tetsuya at jp.fujitsu.com>
>> ---
>> arch/arm/mach-mb86s7x/Makefile | 2 +-
>> arch/arm/mach-mb86s7x/mcpm.c | 360 +++++++++++++++++++++++++++++++++++++++++
>> arch/arm/mach-mb86s7x/smc.S | 27 ++++
>> 3 files changed, 388 insertions(+), 1 deletion(-)
>> create mode 100644 arch/arm/mach-mb86s7x/mcpm.c
>> create mode 100644 arch/arm/mach-mb86s7x/smc.S
>>
>> diff --git a/arch/arm/mach-mb86s7x/Makefile b/arch/arm/mach-mb86s7x/Makefile
>> index 97640b6..b0fa34b 100644
>> --- a/arch/arm/mach-mb86s7x/Makefile
>> +++ b/arch/arm/mach-mb86s7x/Makefile
>> @@ -1 +1 @@
>> -obj-$(CONFIG_ARCH_MB86S7X) += board.o
>> +obj-$(CONFIG_ARCH_MB86S7X) += board.o mcpm.o smc.o
>> diff --git a/arch/arm/mach-mb86s7x/mcpm.c b/arch/arm/mach-mb86s7x/mcpm.c
>> new file mode 100644
>> index 0000000..bf1b50a
>> --- /dev/null
>> +++ b/arch/arm/mach-mb86s7x/mcpm.c
>> @@ -0,0 +1,360 @@
>> +/*
>> + * arch/arm/mach-mb86s7x/mcpm.c
>> + * Copyright: (C) 2013-2014 Fujitsu Semiconductor Limited
>> + * Copyright: (C) 2014 Linaro Ltd.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <linux/io.h>
>> +#include <linux/pm.h>
>> +#include <linux/delay.h>
>> +#include <linux/cpu_pm.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/arm-cci.h>
>> +#include <linux/spinlock.h>
>> +#include <linux/suspend.h>
>> +#include <linux/of_device.h>
>> +#include <linux/irqchip/arm-gic.h>
>> +#include <linux/platform_device.h>
>> +
>> +#include <soc/mb86s7x/scb_mhu.h>
>> +
>> +#include <asm/mcpm.h>
>> +#include <asm/cp15.h>
>> +#include <asm/cputype.h>
>> +#include <asm/suspend.h>
>> +#include <asm/idmap.h>
>> +
>> +#define S7X_MAX_CLUSTER 2
>> +#define S7X_MAX_CPU 2
>> +
>> +#define MHU_SHM_OFFSET 0x3800
>> +#define WFI_COLOR_OFFSET 0x3f00
>> +#define TRAMPOLINE_OFFSET 0x3c00
>> +#define RESET_OFFSET (TRAMPOLINE_OFFSET + 0x3fc)
>> +
>> +static arch_spinlock_t mb86s7x_pm_lock = __ARCH_SPIN_LOCK_UNLOCKED;
>> +static int mb86s7x_pm_use_count[S7X_MAX_CLUSTER][S7X_MAX_CPU];
>> +extern void __iomem *mb86s7x_shm_base;
>> +
>> +#define AT_WFI_DO_NOTHING 0x0
>> +#define AT_WFI_DO_SUSPEND 0x1
>> +#define AT_WFI_DO_POWEROFF 0x2
>> +#define AT_WFI_COLOR_MASK 0x3
>> +
>> +struct mb86s7x_cpu_gate {
>> + u32 payload_size;
>> + u32 cluster_class;
>> + u32 cluster_id;
>> + u32 cpu_id;
>> +#define SCB_CPU_STATE_OFF 0x0
>> +#define SCB_CPU_STATE_ON 0x1
>> +#define SCB_CPU_STATE_SUSP 0x2
>> + u32 cpu_state;
>> +};
>> +
>> +asmlinkage void mb86s70evb_outer_flush_all(void)
>> +{
>> + outer_flush_all();
>> +}
>> +
>> +#define mb86s70evb_exit_coherency_flush(level) { \
>> + asm volatile( \
>> + "stmfd sp!, {fp, ip}\n\t" \
>> + "mrc p15, 0, r0, c1, c0, 0 @ get SCTLR\n\t" \
>> + "bic r0, r0, #"__stringify(CR_C)"\n\t" \
>> + "mcr p15, 0, r0, c1, c0, 0 @ set SCTLR\n\t" \
>> + "isb\n\t" \
>> + "bl v7_flush_dcache_"__stringify(level)"\n\t" \
>> + "bl mb86s70evb_outer_flush_all\n\t" \
>
> This is wrong. As mentioned already, this unconditionally flushes L2 in
> all cases which shouldn't be necessary in the "louis" case.
>
IIUC the external/outer cache needs to be flushed only if it's last
cluster going down. It would be suboptimal to flush it when one cluster
is going down while other is still active. So it's not always correct
for even "all" case too.
Regards,
Sudeep
More information about the linux-arm-kernel
mailing list